Nokon cables; difference between brake and shift cables
Moderator: robbosmans
- irongatsby
- Posts: 404
- Joined: Fri Jan 21, 2011 7:59 am
- Location: Los Angeles
When I searched for some Nokon cables online, I saw that Nokon and a few retailers selling cable sets made specifically for shifting/derailleurs and sets made for brake systems. Then, I found other retailers who list them as one cable set for 'road brake or shifting'. Can someone shed some light on this? Aren't brake cables thicker than gear cables?
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
Yes, cables are différent, but Nokon is the same
I think the différence it's more for V Brake, for MTB
Nokon is a good gear only if you use the Powercordz liner:
Uploaded with ImageShack.us
Before, i use the Nokon liner, wich is black, it was a shit, then, with this Powercordz liner, no shift problem and it's verry fluid!
I think the différence it's more for V Brake, for MTB
Nokon is a good gear only if you use the Powercordz liner:
Uploaded with ImageShack.us
Before, i use the Nokon liner, wich is black, it was a shit, then, with this Powercordz liner, no shift problem and it's verry fluid!
As far as I'm aware they used to have different offerings, but now they converged the two product lines.
Bikes: Raw Ti, 650b flatbar CX
As someone mentioned, they used to have different things in the packaging. For a time, Shimano derailleur kits wouldn't have the flexible noodle thing that the Sram/Campy kits did, but then they opted to converge everything into an all-in-one package. Now they'll come with 2x brake cables, 2x gear cables, and the appropriate inner liners for each. One note about the inner liners is that the derailleur liner seems to be slightly smaller in inner diameter than standard cables, so you have to use the supplied Nokon cables. I recommend not using their derailleur liner and instead using the supplied brake liner for brake and gear cabling, or get the Power Cordz/Jagwireliners that work a lot better.
Last edited by BeeSeeBee on Tue Jun 12, 2012 7:09 pm, edited 1 time in total.
- irongatsby
- Posts: 404
- Joined: Fri Jan 21, 2011 7:59 am
- Location: Los Angeles
Thanks for the comments everyone.
BeeSeeBee wrote: I recommend not using their derailleur liner and instead using the supplied brake liner for brake and gear cabling, or get the Power Cordz/Alligator liners that work a lot better.
So you have tried the Nokon AND the Alligator links and found that the Alligator links offer even less friction?
It's not how much you spend on a bike it's how hard you can ride it.
Mikmik wrote:So you have tried the Nokon AND the Alligator links and found that the Alligator links offer even less friction?
Whoops, meant Jagwire, not Alligator. I found them to be better just by virtue of giving the cable a bit more room to move.
BeeSeeBee wrote:Mikmik wrote:So you have tried the Nokon AND the Alligator links and found that the Alligator links offer even less friction?
Whoops, meant Jagwire, not Alligator. I found them to be better just by virtue of giving the cable a bit more room to move.
I am using Nokon for a difficult TT bike application but the search for the ultimate is never ending .
It's not how much you spend on a bike it's how hard you can ride it.
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com