problem with my seatpost fuji sst 3.0

Back by popular demand, the general all-things Road forum!

Moderator: robbosmans

Forum rules
Post Reply
jasonliliong
Posts: 6
Joined: Wed May 09, 2012 5:24 pm

by jasonliliong on Mon Jun 11, 2012 2:56 pm

when the bolt is fully tightened, my seatpost continues to fall down...

So what is the solution to solve this problem ???

Anybody's help.

Thanks
Top
drmutley
Posts: 338
Joined: Fri Feb 11, 2011 4:23 am

by drmutley on Mon Jun 11, 2012 3:16 pm

Carbon paste
Top

by Weenie on Mon Jun 11, 2012 3:16 pm


Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓    Broad Selection ✓    Worldwide Delivery ✓

www.starbike.com


Top
artray
Posts: 1347
Joined: Fri Oct 07, 2011 2:08 pm

by artray on Mon Jun 11, 2012 8:29 pm

If your seatpost still slips with carbon paste, just put some clear coat round the seatpost, so it becomes a tight fit into the frame and clamp as normal and it will not slip, plus you will not need to tighten so much.
Top
drmutley
Posts: 338
Joined: Fri Feb 11, 2011 4:23 am

by drmutley on Wed Jun 13, 2012 4:41 am

artray wrote:If your seatpost still slips with carbon paste, just put some clear coat round the seatpost, so it becomes a tight fit into the frame and clamp as normal and it will not slip, plus you will not need to tighten so much.


+1
Resist the temptation to over tighten as those fujis from experience have a tendency to crack
Top
Post Reply

Return to “Road”