Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About Impressum
It is currently Mon Sep 26, 2016 1:20 pm
Recently the board software has been updated and there are some known bugs/failures:
- Avatars are currently not being displayed ✔ FIXED
- Tapatalk connection is currently broken ✔ FIXED
- Avatars cannot be uploaded ✔ FIXED

Please note that we will soon do some changes in WW board template design in case to get a fully mobile/desktop responsiveness board!
If you find more errors please post it here: http://weightweenies.starbike.com/forum/viewtopic.php?f=7&t=139062


All times are UTC+01:00





Post new topic  Reply to topic  [ 9 posts ] 
Author Message
 Post subject: Velocity hubs
PostPosted: Fri Jun 08, 2012 6:46 pm 
Offline
in the industry

Joined: Sat May 12, 2012 7:25 pm
Posts: 2682
Location: Glermsford, Suffolk U.K
I have been looking at the velocity helios hubs 24F and 28R. they claim 70g from the front and 214g for the rear. I have been thinking about these for a wheel build usaing Kinlin XR300 rims. Does anyone one have experience of the durability of these as I am itching to try them out.

_________________
www.thecycleclinic.co.uk


Top
   
 Post subject: Velocity hubs
Posted: Fri Jun 08, 2012 6:46 pm 


Top
   
 
 Post subject: Re: Velocity hubs
PostPosted: Fri Jun 08, 2012 7:13 pm 
Offline

Joined: Tue Apr 03, 2012 8:25 am
Posts: 10
Good budget combo for weight and strength. I have a feeling the hubs would fall down with harsh abuse. If all the bearing are replaceable though it's not a biggie. If you ride smooth and your on a budget go for it.


Top
   
 Post subject: Re: Velocity hubs
PostPosted: Fri Jun 08, 2012 8:56 pm 
Offline
in the industry

Joined: Sat May 12, 2012 7:25 pm
Posts: 2682
Location: Glermsford, Suffolk U.K
Well that is something I would check first.

Who distributes alchemy hubs and the other lightweight alternatives in the U.K. I prefer to buy kit trade if I can.

_________________
www.thecycleclinic.co.uk


Top
   
 Post subject: Re: Velocity hubs
PostPosted: Fri Jun 08, 2012 9:04 pm 
Offline
in the industry
User avatar

Joined: Fri Sep 09, 2011 2:38 pm
Posts: 75
Location: Brighton, UK
I think the Velocity hubs are made by Formula.

No one distributes Alchemy in the UK as far as I'm aware.

Our hubs have a decent sealed bearing and you can upgrade to SKF or ceramic as we have manufactured a pre-load adjuster for them.

The XR300s are ok (we've built a few pairs) but there are good alternatives such as the Velocity range available too.

_________________
Strada Hand Built Wheels
http://www.stradawheels.co.uk


Top
   
 Post subject: Re: Velocity hubs
PostPosted: Fri Jun 08, 2012 11:13 pm 
Offline

Joined: Tue Aug 02, 2011 5:54 pm
Posts: 346
From a quick search they look identical to the Formula RB-68/RB-210 hubset I just built up. No idea about durability yet, but these hubs have been around for a while and I have not seen negative reports.


Top
   
 Post subject: Re: Velocity hubs
PostPosted: Fri Jun 08, 2012 11:27 pm 
Offline
in the industry

Joined: Sat May 12, 2012 7:25 pm
Posts: 2682
Location: Glermsford, Suffolk U.K
Well since Velocity state the bearings they use in their hubs I trhink they will be replaceble and that is hardly a problem. I make more enquiries on Monday. but I also can't find any negative reports about them either. That is at least good news.

_________________
www.thecycleclinic.co.uk


Top
   
 Post subject: Re: Velocity hubs
PostPosted: Fri Jun 08, 2012 11:39 pm 
Offline

Joined: Tue Aug 02, 2011 5:54 pm
Posts: 346
Cartridge bearings are easy and cheap to source, so no worries there.

I would guess that freehub availability is also good coming from a well-known hub manufacturer, but it wouldn't hurt to ask.


Last edited by sanrensho on Sat Jun 09, 2012 6:37 am, edited 1 time in total.

Top
   
 Post subject: Re: Velocity hubs
PostPosted: Sat Jun 09, 2012 2:38 am 
Offline

Joined: Sat Jun 02, 2007 1:10 am
Posts: 1845
Location: Melbourne, Australia
You can get the same or similar hubs from ebay probably a lot cheaper.

Look at BHS as well- get their wide hub.

If you are a "larger" cyclist some of these hub sets aren't the greatest. The bearing sizes can be small, and the axles aren't very stiff (which can cause misalignment stresses in the small bearings).

If you look into the design of the Alchemy hubs, Jeremy was very concerned about bearing size and axle stiffness, as well as spoke geometry, and finally the weights came out pretty low as a final consideration.


Top
   
 Post subject: Re: Velocity hubs
Posted: Sat Jun 09, 2012 2:38 am 


Top
   
 
 Post subject: Re: Velocity hubs
PostPosted: Sat Jun 09, 2012 4:31 pm 
Offline
in the industry

Joined: Sat May 12, 2012 7:25 pm
Posts: 2682
Location: Glermsford, Suffolk U.K
Your point about bearing/axle size is very valid I think - I am 85 kg. I normally steer towards a more robust hub like the Miche RC2 that I am currently using but these only come as pairs of the same drilling.

Maybe it will be the miche hubs or the novatec/ambrosio hubs that I also trust. I wish I had a bigger budget for some chris kings, DT swiss or goldtec hubs.

_________________
www.thecycleclinic.co.uk


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 9 posts ] 

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. DT Swiss 350 hubs

in Road

burglarboycie

3

678

Fri May 13, 2016 10:28 pm

burglarboycie View the latest post

There are no new unread posts for this topic. Carbon-Ti Road SL Hubs

in Road

NiFTY

11

893

Tue Dec 08, 2015 12:19 am

NiFTY View the latest post

There are no new unread posts for this topic. Light weight fast rolling hubs

in Road

oreoboreo

6

1017

Wed Jan 06, 2016 5:00 pm

oreoboreo View the latest post

There are no new unread posts for this topic. carbon ti SL road hubs drillings and availability

in Road

pavel

2

214

Sat Feb 20, 2016 6:41 am

pavel View the latest post

There are no new unread posts for this topic. zipp safety recalls - QRs and also front hubs

in Road

sungod

3

534

Fri Mar 18, 2016 4:38 pm

tinozee View the latest post


All times are UTC+01:00


Who is online

Users browsing this forum: benzebub, CBRE, cedced74, IcedHalo, olmostalegend, shoemakerpom2010, snaaijer and 26 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited