Specialized Barmac Wedge Weight
Posted: Sat May 19, 2012 10:34 pm
Not that it seems many are using the Barmac, and not too many threads here about its weight. I just pulled mine off to swap to a Ritchey c260 and 3T Ergonova Team and thought I'd weight it.
This is for a 42 x 110, 0 degree. Weights were much lighter than I expected for the bare bar/stem at 336g. With hardware, 390g, which is about where I expected it to land.
http://i1084.photobucket.com/albums/j411/utmtnbiker/IMG_1912.jpg
http://i1084.photobucket.com/albums/j411/utmtnbiker/IMG_1913.jpg
Just for comparison sake, both parts below weighed with same scale:
Ritchey c260, 110mm = 109g (all inclusive with hardware)
3T Ergonova Team 44cm = 200g
Saved about 80g and can't really tell one is more stiff than the other - ride on Zipp 303's so the handlebar/stem area is not where I'm going to flex.
This is for a 42 x 110, 0 degree. Weights were much lighter than I expected for the bare bar/stem at 336g. With hardware, 390g, which is about where I expected it to land.
http://i1084.photobucket.com/albums/j411/utmtnbiker/IMG_1912.jpg
http://i1084.photobucket.com/albums/j411/utmtnbiker/IMG_1913.jpg
Just for comparison sake, both parts below weighed with same scale:
Ritchey c260, 110mm = 109g (all inclusive with hardware)
3T Ergonova Team 44cm = 200g
Saved about 80g and can't really tell one is more stiff than the other - ride on Zipp 303's so the handlebar/stem area is not where I'm going to flex.
