Thoughts on probable weight/setup for potential build
Posted: Wed May 16, 2012 12:37 am
A modest project, I know. I'm contemplating the feasibility of a steel Indy Fab--Crown Jewel if I can get away with it, or the Factory Lightweight. This only if I can match the weight of my current ride, a 2009 54 Specialized Roubaix Comp with the component set below (about 17.3 lb). IF says the Factory Lightweight (with 50cm c-t-t ST) should be around 3 lb. Fork will be an Enve Road 2.0.
tia
Handlebars: Deda Zero100 42cm o-t-o
Stem: Easton EA90 -10° 13cm
Headset: Cane Creek 8mm stack/2.5mm spacer
Seatpost: Deda SuperZero
Saddle: Aliante Twin Flex ti
Pedals: Shimano Dura Ace PD-7810
Bottom Bracket: VCRC Road Ceramic
Crank: 2011 SRAM Force
Shifters: 2011 SRAM Red
Derailleurs: 2011 SRAM Force f/r
Gore Ride On cables
Chain: KMC DX10SC
Cassette: Shimano 6700
Brakes: SRAM Rival
Wheelset: Campagnolo Neutron
Bottle Cages: Arundel Sport
tia
Handlebars: Deda Zero100 42cm o-t-o
Stem: Easton EA90 -10° 13cm
Headset: Cane Creek 8mm stack/2.5mm spacer
Seatpost: Deda SuperZero
Saddle: Aliante Twin Flex ti
Pedals: Shimano Dura Ace PD-7810
Bottom Bracket: VCRC Road Ceramic
Crank: 2011 SRAM Force
Shifters: 2011 SRAM Red
Derailleurs: 2011 SRAM Force f/r
Gore Ride On cables
Chain: KMC DX10SC
Cassette: Shimano 6700
Brakes: SRAM Rival
Wheelset: Campagnolo Neutron
Bottle Cages: Arundel Sport