Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About Impressum
It is currently Sat Dec 03, 2016 3:40 am
Recently the board software has been updated and there are some known bugs/failures:
- Avatars are currently not being displayed ✔ FIXED
- Tapatalk connection is currently broken ✔ FIXED
- Avatars cannot be uploaded ✔ FIXED

Please note that we will soon do some changes in WW board template design in case to get a fully mobile/desktop responsiveness board!
If you find more errors please post it here: http://weightweenies.starbike.com/forum/viewtopic.php?f=7&t=139062

All times are UTC+01:00

Post new topic  Reply to topic  [ 6 posts ] 
Author Message
PostPosted: Tue May 15, 2012 1:15 pm 
User avatar

Joined: Wed Oct 06, 2004 6:55 pm
Posts: 2415
Location: Vienna, AUT
A few months ago I had a tragic accident and cracked a Canyon Ultimate CF frame on the drive side seat stay.
And by tragic I mean, tragically stupid - a workshop fall and impact with a tool box. Stomach turning to watch it happen in slow motion...

The frame is a 2008 or 2009 model, in red, and Canyon's customer service was less than inspirational in discussing options.
Their solution was send them the frame back and they would give a crash replacement, but the value was minimal with that route as I purchased the frame through the Canyon Outlet.
I like the frame, and the color. It was not used much prior to the fall.

At the recommendation of some threads here, I contacted Fibre Lyte and spoke with Stephen at Hansell Composites. The experience was excellent and I wanted to encourage those with carbon damage to reach out to them. I provided photos of the damage and color codes and was given a quote via email. The frame was sent out and in very short time the damage had been repaired.

Fibre Lyte uses Shelby Art for their color matching and Steve there was very proactive in providing me pictures of the work when done and even moving me up in his schedule a few days to accomodate a timeline.

Ultimately, Stephen at Fibre Lyte contacted me and advised their estimate had been a bit high and he adjusted the total charges.
I was lost for words. Amazing. Needless to say, this was a very enjoyable experience.

I received the frame back from the UK yesterday! It was packed up in the box I used, but padded to survive a three story free fall. I thought I was OCD about wrapping it, but Stephen made sure the frame was well protected for the trip home. (It took me 15 minutes to unwrap it!) :D

I then went about trying to decipher where the repair was done. Honestly, I could not see it. The color matching is spot on and I cannot identify the expected bulge in the area of the repair. I started holding the frame under different lamps attempting to find the flaws.
I then, laughably, went to the length of checking the rest of the frameset for the identifiable scratches I had made in riding to determine that they had not swapped out frames! Hahaha. It is the same one.

So, to wrap up, a shout out to Fibre Lyte and a warm thanks for getting me back on the road before my Südtirol adventure.
Also much appreciated gratitude to Shelby Art for their work.

I am not affiliated with either of these companies in any way other than being a grateful customer.
Both have an excellent customer service orientation and seem to truly enjoy doing good work.
Thanks Stephen and Steve.

If you need carbon repair, I recommend you contact Stephen at Fibre Lyte.
http://www.fibre-lyte.co.uk/" onclick="window.open(this.href);return false;" onclick="window.open(this.href);return false;

Steve at Shelby Art:
http://www.shelbyart.co.uk/" onclick="window.open(this.href);return false;

Once the frameset is built back up I will post photos.

Posted: Tue May 15, 2012 1:15 pm 

PostPosted: Wed May 16, 2012 12:48 am 
in the industry
User avatar

Joined: Thu May 29, 2008 12:22 am
Posts: 605
It's always great to see a happy customer, thanks for the write up. :D

Just for the record, our Special Projects Engineer who does all the repairs is called John, so if anyone is looking for any info, they can either contact myself or speak to John and we'll do our best to help.

PostPosted: Wed May 16, 2012 1:19 am 
Tubbie Guru

Joined: Tue May 03, 2005 2:20 am
Posts: 5850
Location: Belgium

Good to hear it all turned out so well, Stoli.
I remember having a similar amount of enthusiasm and joy when I received something as seemingly simple as a RD inner plate made by Fibre-Lyte.
One look and you instantly feel these guys know what they're doing.

Good show. :thumbup:

Ciao, ;)

Being a snob is an expensive hobby.

PostPosted: Wed May 16, 2012 4:05 am 
User avatar

Joined: Fri Sep 15, 2006 6:02 am
Posts: 3239
Location: On the bike
Stolichnaya, good to see you around again. Thanks for sharing. Always good to hear of a WW with good experience. Thumbs up.

"Marginal gains are the only gains when all that's left to gain is in the margins."

PostPosted: Wed May 16, 2012 8:07 am 
in the industry
User avatar

Joined: Fri Sep 23, 2005 6:34 pm
Posts: 554
Location: Insjön, SWEDEN
Even I repair frames and carbon stuff for living but I can recommend Stephen at Fibre Lyte just because he is a good guy.

Seeing this write up does lighten up my day as there´s more people like me who takes the work with pride.

Excusing me for eventual wrong words as I´m translating directly from swedish in my head.

Experimental Prototype

PostPosted: Wed May 16, 2012 8:15 am 
User avatar

Joined: Wed Oct 06, 2004 6:55 pm
Posts: 2415
Location: Vienna, AUT
And yes, let me state, my apologies for the oversight of not mentioning John at Hansell Composites who did the exceptional work on the frame repair. it was not my intention to have such an oversight. The bulk of my interface during the process was with Stephen.

John, thank you. Your enthusiasm and attention to detail is inspiring.

It was, in part, ownership of one of the Fibre Lyte RD plates that told me they would be a fine place to send the Canyon for repairs. WW commnts certainly helped out.

Thanks again all.

Posted: Wed May 16, 2012 8:15 am 

Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 6 posts ] 

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. Fibre-Lyte 'ultra lyte' rear gear mech inner plate

in Road




Wed Dec 23, 2015 10:59 pm

UpFromOne View the latest post

There are no new unread posts for this topic. Fibre Lyte chainring bad shifting

[ Go to page: 1 2 ]

in Road




Sun Jul 31, 2016 6:04 am

KCookie View the latest post

There are no new unread posts for this topic. look keo blade carbon-ti maintenace/repair

in Road




Fri Feb 05, 2016 8:15 am

rickytek View the latest post

There are no new unread posts for this topic. Are my hairline cracked or broken carbon fibre handlebars broken or useable? Can they be easily repaired?

in Road




Wed Nov 02, 2016 3:52 pm

AJS914 View the latest post

There are no new unread posts for this topic. 77 Composites wheels

in Road




Fri Jun 03, 2016 12:53 am

Akennelly View the latest post

All times are UTC+01:00

Who is online

Users browsing this forum: flafonta, glam2deaf, rule5 and 21 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited