Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About
It is currently Tue May 03, 2016 5:41 pm
Recently the board software has been updated and there are some known bugs/failures:
- Avatars are currently not being displayed ✔ FIXED
- Tapatalk connection is currently broken ✔ FIXED

If you find more errors please post it here: http://weightweenies.starbike.com/forum/viewtopic.php?f=7&t=139062


All times are UTC+01:00





Post new topic  Reply to topic  [ 5 posts ] 
Author Message
PostPosted: Tue May 08, 2012 11:45 pm 
Offline

Joined: Fri Aug 05, 2011 3:12 am
Posts: 67
I think I remember a thread on here about this but it was old and I can't find it.

Basically I want to try the campy feel without changing my derailleurs, chain, or cassette. Could I use 10 speed (centaur or veloce) shifters with my otherwise sram rival bike? I'm curious if anyone has tried this.

This article says it should work http://velonews.competitor.com/2008/03/ ... -not_73404

Thanks!


Top
   
PostPosted: Wed May 09, 2012 12:03 am 
Offline

Joined: Fri Mar 24, 2006 1:26 pm
Posts: 2529
There are lots of people who have tried it, but those of us who know the actual cables pulls know that it makes no sense. A SRAM RD needs uniforn cable pulls of 3mm per shift. A Campy 10 shifter pulls 2.5mm five times, 3mm twice and 3.5mm twice. If you add the first five pulls, all you get is 12.5mm, where 15mm is needed. Since a SRAM RD needs 12mm of cable pull for 4 shifts, the RD position would be a lot closer to the 5th cog than the intended 6th cog, after five shifts. If gets no better on the next two pulls that are actually what the SRAM RD needs.


When Lennard Zinn measured the cable pull, all he did was measure the total pull and did a poor job of that.


Top
   
PostPosted: Wed May 09, 2012 1:11 am 
Offline
User avatar

Joined: Sun Nov 02, 2003 6:48 am
Posts: 1212
Location: Central USA
DaveS wrote:
When Lennard Zinn measured the cable pull, all he did was measure the total pull and did a poor job of that.


Agree - I'll add to that by saying Zinn is pretty lame

Time and time again he spreads much mis-information and then only after readers challenge him does he (time and time again) use an excuse along the lines that he didn't put all the facts out there (assuming he knew them at the time)......how he's held his position at that magazine for so long escapes me..... :noidea:


Top
   
PostPosted: Thu Apr 04, 2013 12:14 am 
Offline

Joined: Wed Nov 17, 2010 8:59 pm
Posts: 65
I'm not sure about the math, but I have 10spd Chorus shifters with Rival rear DR (SRAM cassette) on my cross bike and it shifts fine...


Top
   
PostPosted: Thu Apr 04, 2013 1:18 am 
Offline

Joined: Thu Jul 12, 2012 10:47 am
Posts: 38
Having tried it, I can say that it works well enough.

Dont know if it makes any difference, but I was using 2010 Centaur ultra-shift levers.

EDIT: whoops, just noticed that this was a necro thread...


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 5 posts ] 

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. 11 speed DA9000 cassette with Sram Force 22 shifters

in Road

Champ5000

1

361

Sat Aug 08, 2015 7:54 am

fEichert View the latest post

There are no new unread posts for this topic. Shimano ultegra Shifters 11 speed on 10 speed cassette?

in Road

Tomstr

4

956

Fri May 22, 2015 8:41 am

Tomstr View the latest post

There are no new unread posts for this topic. 11 speed Dura ace Di2 shifters compatible with 11 speed Ulte

[ Go to page: 1 2 ]

in Road

jorisee01

26

1193

Fri Nov 06, 2015 4:42 pm

SuperDave View the latest post

There are no new unread posts for this topic. 2015 Campy FD with 2013 shifters

in Road

trailwinder

6

591

Mon Jul 20, 2015 1:48 am

Voye View the latest post

There are no new unread posts for this topic. question about sram red 22 shifters , well two questions.

in Road

nathanong87

9

854

Sat Jun 27, 2015 6:30 pm

nathanong87 View the latest post


All times are UTC+01:00


Who is online

Users browsing this forum: Baidu [Spider], CanadianBiker, delsol, Exabot [Bot], wpccrunner, zazo and 32 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited