Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About
It is currently Fri Jun 24, 2016 9:59 pm
Recently the board software has been updated and there are some known bugs/failures:
- Avatars are currently not being displayed ✔ FIXED
- Tapatalk connection is currently broken ✔ FIXED
- Avatars cannot be uploaded ✔ FIXED

Please note that we will soon do some changes in WW board template design in case to get a fully mobile/desktop responsiveness board!
If you find more errors please post it here: http://weightweenies.starbike.com/forum/viewtopic.php?f=7&t=139062


All times are UTC+01:00





Post new topic  Reply to topic  [ 7 posts ] 
Author Message
PostPosted: Mon May 07, 2012 4:50 pm 
Offline

Joined: Tue Apr 12, 2011 8:08 am
Posts: 2275
Location: Pedal Square
I took apart a bike and found the Ultegra rear mech upper cog to have lateral play of about 3-5mm. The bike was in quite regular use for a few years. Is that play normal, or should I be looking out to replace parts? Thanks.

_________________
Bikes: Raw Ti, 650b flatbar CX


Top
   
PostPosted: Mon May 07, 2012 5:41 pm 
Offline

Joined: Sat May 07, 2011 12:23 am
Posts: 183
Yes this is normal. The pulley is designed to have some lateral movement to negate any small misalignment between the cassette and derailleur. Unless there is damage to the bushing/bearing, or wear to the pulley teeth, you can probably re-use it.


Top
   
PostPosted: Mon May 07, 2012 7:14 pm 
Offline

Joined: Tue Apr 12, 2011 8:08 am
Posts: 2275
Location: Pedal Square
Thanks. Interestingly the Tiso pulleys I have checked against on another, unused RD don't have any play.

_________________
Bikes: Raw Ti, 650b flatbar CX


Top
   
PostPosted: Tue May 08, 2012 3:54 am 
Offline
Shop Owner

Joined: Sat Jun 13, 2009 4:02 am
Posts: 1980
Location: NoVA/DC
that's what makes tiso, and most other aftermarket pulleys, inferior. best upper pulley is dura ace. ball bearings AND floating.


Top
   
PostPosted: Tue May 08, 2012 12:21 pm 
Offline

Joined: Sat Jul 29, 2006 2:36 am
Posts: 1229
Location: UK
Isn't 3-5mm play a bit excessive? I thought about 1mm was the norm for Shimano?


Top
   
PostPosted: Tue May 08, 2012 12:57 pm 
Offline
in the industry
User avatar

Joined: Wed Jan 19, 2011 11:14 am
Posts: 1373
Location: SYD
5mm is way to much... 1mm total is ok.. I say it's new pully time..
I just replaced a set of DA pullys on a friends bike that had that kinda play with some spare ( second hand ) extralite pullys I had... It didn't shift so well before now it's like butter....

_________________
Skunkworks Bikes


Top
   
PostPosted: Wed May 09, 2012 3:15 am 
Offline
Shop Owner

Joined: Sat Jun 13, 2009 4:02 am
Posts: 1980
Location: NoVA/DC
im assuming the measurements given are exaggerated. if the play is purely lateral, it's fine. if the play allows the pulley to "roll" (top goes left, bottom goes right), then it needs to be replaced.


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 7 posts ] 

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. dura ace 9070 front derailleur lateral play??

in Road

Delorre

1

410

Sun Sep 13, 2015 11:47 am

tnc1970 View the latest post

There are no new unread posts for this topic. Healthy amount of play on zipp 404 fc rear?

in Road

tri

11

732

Sat Jul 04, 2015 7:55 pm

tinozee View the latest post

There are no new unread posts for this topic. Super Record EPS Rear Mech - 11 X 32 Cassette?

in Road

peacefulloflove

5

272

Sun Feb 21, 2016 6:23 pm

jrobart View the latest post

There are no new unread posts for this topic. Dura Ace and Ultegra rear Mech interchangeablity

in Road

weastman

1

214

Tue May 24, 2016 11:57 am

junchen View the latest post

There are no new unread posts for this topic. Dura Ace 9070 Rear Mech Hanger stiff problem

in Road

TheDarkInstall

6

471

Sun Jun 05, 2016 5:47 am

TheDarkInstall View the latest post


All times are UTC+01:00


Who is online

Users browsing this forum: Exabot [Bot], krusty, prototoast, Yahoo [Bot] and 13 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited