Hi all
I've just moved the battery on my 2012 Cannondale Evo Di2 into the seatpost, and wondered if there were some neat black frame plugs for the small screws and plug hole? The existing bolts (see pic) have silver parts and the plug has a hole...
Help welcome, many thanks!
Francis
Di2 moved to seatpost - frame plugs?
Moderator: robbosmans
-
- Posts: 74
- Joined: Tue Sep 16, 2008 11:20 pm
- Location: Burbank, CA
I just used electrical tape to cover my battery harness hole but mine is under the bottle cage. Cover it with red electrical tape the length of the stripe.
R2.5 / R3 / S-Works 29er (20 lbs) / S-Works SL4 Di2 (14.7 lbs)
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
You could get some light alloy bolts that would fit, you can get any colour. What about putting a bit of the carbon frame protector tape that you can buy over the plug hole , just cut it to the right size and stick it on.
There is also some putty products out there, like mighty putty etc etc , these could plug your gap and you could just touch them up with a bit of paint .
There is also some putty products out there, like mighty putty etc etc , these could plug your gap and you could just touch them up with a bit of paint .