Page 1 of 1
Crank arms for DA7900 rings
Posted: Sat Apr 28, 2012 4:18 am
by hanzo111
Guys,
I just purchased a set of DA 7900 rings for my bike to replace my DA 7800
rings. I was going to use my 7800 arms but it looks like crap.
I would also like to shed some weight and am looking for crank arms that would fit
a 130BCD, I would like carbon for the look and weight. Any advice? I purchased
these over a lighter ring/crank package because i still want smooth shifting and
stiff rings.
Any advice would be appreciated.
Regards
Crank arms for DA7900 rings
Posted: Sat Apr 28, 2012 4:18 am
by Weenie
Visit
starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
Re: Crank arms for DA7900 rings
Posted: Sat Apr 28, 2012 1:57 pm
by Mackers
Re: Crank arms for DA7900 rings
Posted: Sat Apr 28, 2012 6:32 pm
by hanzo111
oh yeah, those are great. But if I'm going to spend that much i would
rather look at something a bit more exotic.
Hanzo
Re: Crank arms for DA7900 rings
Posted: Sun Apr 29, 2012 11:35 am
by WeightySteve
Mackers wrote:
They just 7800 cranks in Carbon, and it would look just as bad fitted with 7900 rings.
Also, the ring picture in the first post is not a 7900 big ring, so maybe this thread is misleading anyway.
Anyway, the only way 7900 rings look right is on 7900 cranks, and indeed part of the lateral stiffness of the crank/ring system (important for front shifting) is due to the design, because the oversized hollow big ring mates up with the oversized spider arm which counteracts the the bending force as the mech moves the chain. (I know oversized is probably the wrong terminology here).
SRM's design for their 7800/7900 hybrid power meter is probably the best out there for 7900 rings if you don't want 7900 cranks
Re: Crank arms for DA7900 rings
Posted: Sun Apr 29, 2012 4:10 pm
by hanzo111
WeightySteve wrote:Mackers wrote:
They just 7800 cranks in Carbon, and it would look just as bad fitted with 7900 rings.
Yes, they would look silly, Yes I know that.Also, the ring picture in the first post is not a 7900 big ring, so maybe this thread is misleading anyway.
No, You are mistaken as they say Dura Ace 7900 on them and they are "big" rings; hence they are DA 7900 rings. Anyway, the only way 7900 rings look right is on 7900 cranks, and indeed part of the lateral stiffness of the crank/ring system (important for front shifting) is due to the design, because the oversized hollow big ring mates up with the oversized spider arm which counteracts the the bending force as the mech moves the chain. (I know oversized is probably the wrong terminology here).
???SRM's design for their 7800/7900 hybrid power meter is probably the best out there for 7900 rings if you don't want 7900 cranks
No, I'm not interested in a power meter.Thanks
Re: Crank arms for DA7900 rings
Posted: Sun Apr 29, 2012 4:48 pm
by toiyuet
This is not a 7900 chainwheel, it is a Yumeya YM-FC91 for 7800.
It looks much weaker than 7900 chainwheel when pair with Di2.
Re: Crank arms for DA7900 rings
Posted: Sun Apr 29, 2012 11:04 pm
by hanzo111
toiyuet wrote:This is not a 7900 chainwheel, it is a Yumeya YM-FC91 for 7800.
It looks much weaker than 7900 chainwheel when pair with Di2.
I must have the only Yumeya 7900 chain ring on earth then because it is
NOT a 7800 ring,
Please assume that people other than yourselves can read, and are smart enough to know what
they are spending their money on.
FYI: please reffer to the first picture which states "7900"
Now can someone recommend a set of crank arms? I was thinking of an Extralite QRC2 crank set
but am not sure if they work with 130 rings?
Regards
Hanzo
Re: Crank arms for DA7900 rings
Posted: Sun Apr 29, 2012 11:11 pm
by Dov
This thread is LOLs
Crank arms for DA7900 rings
Posted: Mon Apr 30, 2012 12:48 am
by Watziznehm
Well, they may not be carbon but they sure are stiff and lightweight: Cannondale Hollowgram SL.
Re: Crank arms for DA7900 rings
Posted: Mon Apr 30, 2012 4:01 am
by hanzo111
Sorry its so funny
I was thinking of the hollowgrams, I will check them out
Thanks
Hanzo
Re: Crank arms for DA7900 rings
Posted: Mon Apr 30, 2012 3:15 pm
by RussellS
hanzo111 wrote:WeightySteve wrote:Also, the ring picture in the first post is not a 7900 big ring, so maybe this thread is misleading anyway.
No, You are mistaken as they say Dura Ace 7900 on them and they are "big" rings; hence they are DA 7900 rings. [/color]
Lost track of the replies and counter replies. But as stated, the rings in your original picture are most definitely not 7900 rings. Dura Ace 7900 rings DO NOT have a hole all the way through them. The outer chainring is the nut for the crank bolt. The outer chainring is threaded for the bolt to screw into. Look at a picture of a 7900 crankset and you will see the bolt is not visible. The bolt is hidden.
http://www.nashbar.com/bikes/Product_10 ... 1___202430
Re: Crank arms for DA7900 rings
Posted: Tue May 01, 2012 3:19 am
by denzity
I just swapped my 7900 rings for Q-rings. I am sitting here looking at them right now and can confirm that they look NOTHING like the ones the OP posted.
OP: what rings ARE they?
Re: Crank arms for DA7900 rings
Posted: Tue May 01, 2012 3:26 am
by toiyuet
YM-FC91 7800用フロントチェーンリング YUMEYA(夢屋) (Y0Y998040)【shimano】
http://www.flickr.com/photos/shino_soba/4331091041/Limited wdition machined cut with 10g weight reduction....for 7800, also 7900 compactable.
http://www.shimano-yumeya.com/7800.swf
Re: Crank arms for DA7900 rings
Posted: Tue May 01, 2012 3:38 am
by jsinclair
Hanzo, please refer to your own first picture where it says "compatible with 7900". This is quite different to them actually being 7900 series rings. It's probably important to have this distinction clear in your own head before you start jumping down people's throats. We did assume you could read and knew what you were blowing money on. Obviously we were all mistaken in this respect.
Re: Crank arms for DA7900 rings
Posted: Tue May 01, 2012 4:56 am
by hanzo111
Sooooo I called Shimano today.
I was wrong and I was right:
Wrong_they are 7800 rings_not hollow
right_they are have the ramps an profiles of the 7900 rings
right_they are not yumeya rings and weigh in at 102.3 grams where the yumeya rings are 90??? grams
Oh well, I will use them and research more next time
Kind regards
Hanzo
Re: Crank arms for DA7900 rings
Posted: Tue May 01, 2012 4:56 am
by Weenie
Visit
starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com