Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About Impressum
It is currently Thu Dec 08, 2016 5:22 pm
Recently the board software has been updated and there are some known bugs/failures:
- Avatars are currently not being displayed ✔ FIXED
- Tapatalk connection is currently broken ✔ FIXED
- Avatars cannot be uploaded ✔ FIXED

Please note that we will soon do some changes in WW board template design in case to get a fully mobile/desktop responsiveness board!
If you find more errors please post it here: http://weightweenies.starbike.com/forum/viewtopic.php?f=7&t=139062


All times are UTC+01:00





Post new topic  Reply to topic  [ 6 posts ] 
Author Message
 Post subject: Cervelo R5 build
PostPosted: Mon Apr 23, 2012 10:05 pm 
Offline

Joined: Fri Apr 18, 2008 12:55 am
Posts: 173
Hey all-
Just got a new R5 and looking to trick it out... Hoping for 11-12 lbs (its a 61cm). Nothing should be too insanely light as I race a bit and am a 180lbs cat 1. However, I am pretty gentle on equipment, all things considered.
Current build is cervelo frame & fork
2011 Sram red shifters
Bontrager xxx lite 44cm bars at 174g
rotor S1 stem
Red rear d
Red front d
M5 brakes
Arione CX saddle

And that's it so far! :unbelievable:
I have the stock Rotor cranks in a 53/39, but will probably just sell them. I am very interested in the THM m3 bbright crankset. Fairwheel said they should be getting some in soon. I was thinking about mating them with the K3 cobweb rings. Any thoughts? Has anyone ridden these? Reviews are really few and far between.

I am thinking the New Ultimate seatpost which is 132 g
KMC X10SL chain 250g
I should be able to get my hands on a set of zipp 202's, which aren't ideal, but I get a screaming deal on zipps. I have kcnc skewers that I already run on my race wheels (808s).
Torn between the new red cassette v. a kcnc or recon cassette.

I have the stock 3t dorico LTD seatpost and 3t ergonova bars, but I the parts I have or am looking at are a bit lighter.

Anyways, any suggestions or recommendations would be greatly appreciated! :beerchug:


Top
   
 Post subject: Re: Cervelo R5 build
PostPosted: Tue Apr 24, 2012 1:46 am 
Offline
User avatar

Joined: Sat Nov 14, 2009 6:30 am
Posts: 867
Location: So Cal
One of the shop guys got his R5 down to the 12's with a pair of 404 tubulars. Only other non stock part was the S-Works Toupe saddle.

Not too difficult to get the R5 really light.


Top
   
 Post subject: Re: Cervelo R5 build
Posted: Tue Apr 24, 2012 1:46 am 


Top
   
 
 Post subject: Re: Cervelo R5 build
PostPosted: Tue Apr 24, 2012 2:53 am 
Offline
Shop Owner

Joined: Sat Jun 13, 2009 4:02 am
Posts: 1980
Location: NoVA/DC
coworker has an r5 with super record, but rotor crank with cobweb rings. the rings are surprisingly flexy, but more surprisingly, the shifting is very good.


Top
   
 Post subject: Re: Cervelo R5 build
PostPosted: Tue Apr 24, 2012 3:36 am 
Offline

Joined: Fri May 27, 2011 4:48 am
Posts: 35
I ride a R5 in 58cm. 13.6lbs with pedals. Full SRAM red with Rotor 3D cranks. Changed to TRP 970SL brakes and run Shimano c-24 carbon tubulars. I am not quite sure why there would be a need to lower the weigh of the bike to 11 or 12lbs. The performance in my mind would not increase.


Top
   
 Post subject: Re: Cervelo R5 build
PostPosted: Tue Apr 24, 2012 6:00 pm 
Offline

Joined: Fri Apr 18, 2008 12:55 am
Posts: 173
The weight is simply because I want to. Welcome to weigh weenies! I have plenty of other bikes pegged right around 15 lbs for NRC races where weight is an issue, but I have always wanted to do a really light build. I got my SLC-SL 61cm down to 13.3 two years ago which was fun, but the Zipp 300 cranks on it were horrible. Pretty fun to ride, that was with 303s also.

I hadn't though about getting a set of the Cobweb rings and putting them on the rotor cranks. The THM m3 is an awesome looking cranks, but the $/g savings aren't amazing compared to the rotor (not a plus+ rotor crank). I think those cobwebs would look amazing on the rotor crank...

Anyways, thanks for the help, any more ideas are always greatly appreciated.
Tempted to do trying shrink wrapping the hoods to save aother 20-30 g as I have seen a couple others do on the forum


Top
   
 Post subject: Re: Cervelo R5 build
Posted: Tue Apr 24, 2012 6:00 pm 


Top
   
 
 Post subject: Re: Cervelo R5 build
PostPosted: Tue Apr 24, 2012 6:26 pm 
Offline

Joined: Tue Jun 30, 2009 7:40 pm
Posts: 316
Location: CA
You have a really good start with some light parts.

- The THM cranks are awesome, but expensive. Do you have the 3D+ version of the Rotor crank? If so, that's fairly light, no? If not, just try and get one of those instead? They are easily obtained.
- New Ultimate Evo seatpost could save you 15-20 grams over the regular NU post without breaking the bank.
- Shrink-wrapping and/or carbon hoods look like crap IMO, weight weenieism be damned.
- There are many saddles out there that are lighter than the Arione CX.
- I would stick with a Red cassette. The new 2012 one is light!
- Zipp SL bars are light and might fit this build better.
- What about pedals? Keo Blade Ti?
- Cages? Arundel or Zipp?
- You've noted the 202s aren't an ideal lightweight wheelset and I agree, but I like Zipps a lot and you could do a lot worse.

For all this advice, I'm only requesting that you help this dude out with a screaming deal on some Zipps :mrgreen:

Best of luck with the build.


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 6 posts ] 

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. Cervelo r2/r3

in Road

thebadgerboy1982

6

751

Thu Nov 17, 2016 9:37 pm

goodboyr View the latest post

There are no new unread posts for this topic. Best BB for Cervelo R5 (24mm)

[ Go to page: 1 2 ]

in Road

clipsed

15

1071

Tue Oct 11, 2016 10:47 am

wiggof8 View the latest post

There are no new unread posts for this topic. Cervelo S2 2016 and Di2

in Road

Ste_S

14

1798

Sat Mar 05, 2016 9:56 pm

wingguy View the latest post

There are no new unread posts for this topic. New Cervelo Tri Bike: P5X?

[ Go to page: 1 2 3 4 5 ]

in Road

endershan

69

8511

Fri Oct 14, 2016 11:19 pm

oldnslow2 View the latest post

There are no new unread posts for this topic. Force 1 on Cervelo S5

in Road

aih312

0

224

Thu Aug 11, 2016 2:51 am

aih312 View the latest post


All times are UTC+01:00


Who is online

Users browsing this forum: Butcher, CLEAR, hilts, Yahoo [Bot] and 28 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited