Reduce weight of cannondale CAAD9

Back by popular demand, the general all-things Road forum!

Moderator: robbosmans

Post Reply
ijustride
Posts: 1
Joined: Wed Apr 18, 2012 11:21 pm

by ijustride

I have a 2010 CAAD9 frame (BB30) and fork, with Shimano Tiagra 9 speed, Shimano RS30 wheels, cannondale C3 handle bars, and Specialised romyn saddle. I am starting to climbing some bigger climbs ( 3-6 kms average 4-6%) and am looking to take about 1 kg off the weight of my bike without breaking the bank. I love the frame and want to keep for a few more years. Any suggestions would be appreciated. Thanks

by Weenie


Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓    Broad Selection ✓    Worldwide Delivery ✓

www.starbike.com



CerveloBert
Posts: 284
Joined: Tue Dec 20, 2011 12:43 am
Location: Los Angeles, CA

by CerveloBert

1. I think you can do much better with the wheels, but that's where the most money is going to be spent.

2. The tiagra group is heavy from my recollection. Changing out a group set is also going to be spending a lot of cash. I always give my buddies the advice of never go below 105's for Shimano and never below Rival for SRAM

3. If you just started climbing like that - then I'm assuming you have 1kg weight you can drop off of your own body. That would be the cheapest way to go about it.

4. I think 1kg of weight off of your bike is going to be pricey no matter what kind of build you have. That's 2.2 pounds in statute measurements. A culmination of changes will probably yield the result you're looking for. Also - Do you mind if I ask you what the weight of your current build is? Even a bathroom scale measurement would be suffice when you're talking about removing a kilogram of weight.

5. Love that CAAD9 Frame. I had a buddy get it down to 15.2 pounds, one of the funnest bikes I've ever had the pleasure of riding.

socratease
Posts: 160
Joined: Thu Oct 13, 2011 5:25 pm

by socratease

Agree much with CerveloBert

If you're wanting to reduce its weight, the best place to start would be the wheels. True: a nice set of wheels are expensive, however, all but the very nicest bikes are stocked with mediocre wheels, which makes swapping them out with a new bike's hoops (if you ever decide to do that) a no brainer.

Pepijn2010
Posts: 21
Joined: Fri Apr 06, 2012 12:01 am

by Pepijn2010

The climbs you refer to are, let's say, average ones. Anyway, the C3 handlebar (which I had also on my Cannondale (CAAD10)) is pretty heavy, easy to drop more than 100 grams on that thing alone !

quattrings
Posts: 479
Joined: Sun Nov 14, 2010 10:25 pm

by quattrings

I've changed just about every part that came on my CAAD 9 with 105. The only real noticeable changes were wheels, tires and crankset. Try finding a good deal on wheels first.

I'm starting to get that whole 'life is too short to ride bad tires' snobbism now. Open corsa's roll forever and offer more comfort than any other tire I've ever ridden, 10/10! The tubs are a 12 out of 10 :lol:

Good luck and don't forget to post it in the CAAD thread.

mjduct
Posts: 657
Joined: Tue Dec 27, 2011 2:19 pm

by mjduct

get a drill bit and put about 50 holes in your frame :twisted: :twisted: :twisted: :twisted: :twisted:

J/K

wheels, then you can usually lose alot of weight in your brakes, handlebar, and crankset.

nothing is cheap!

by Weenie


Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓    Broad Selection ✓    Worldwide Delivery ✓

www.starbike.com



Cento
Posts: 89
Joined: Sun Jul 04, 2010 4:00 am

by Cento

my caad9 went down to 14.8 lbs from 19lbs,,but spent a little bit money courtesy of ebay,,used but not abused Full sram red groupo then all used carbon cockpits and used zipp 202..

Post Reply