Page 1 of 1
Cannondale Evo pressfit bb30 fit old wired SRM?
Posted: Mon Apr 16, 2012 1:13 am
by Scooter
Alright finally started to build my Evo and am attempting to install my wired SRM but it appears to be bottoming out. I tried with the normal 3 nylon spacers which clearly didn't work. Then attempted 5 spacers but still seems a tight and I haven't even torqued it.
Anyone else running a wired SRM on an Evo? Is it even possible without ghetto rigging? Looking for an excuse to go wireless lol but dont have the funds right now
Cannondale Evo pressfit bb30 fit old wired SRM?
Posted: Mon Apr 16, 2012 1:13 am
by Weenie
Visit
starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
Re: Cannondale Evo pressfit bb30 fit old wired SRM?
Posted: Mon Apr 16, 2012 2:02 am
by hmai18
I seem to recall there being a BB spindle specifically for SRM.
Re: Cannondale Evo pressfit bb30 fit old wired SRM?
Posted: Mon Apr 16, 2012 4:28 am
by Scooter
I have the SRM spindle and new locking for Evo.
Re: Cannondale Evo pressfit bb30 fit old wired SRM?
Posted: Mon Apr 16, 2012 5:13 am
by steel515
[quote="Scooter"]Alright finally started to build my Evo and am attempting to install my wired SRM but it appears to be bottoming out. I tried with the normal 3 nylon spacers which clearly didn't work. Then attempted 5 spacers but still seems a tight and I haven't even torqued it.
i thought canondale is not pressfit bb30?
Re: Cannondale Evo pressfit bb30 fit old wired SRM?
Posted: Mon Apr 16, 2012 5:21 am
by Scooter
steel515 wrote:Scooter wrote:Alright finally started to build my Evo and am attempting to install my wired SRM but it appears to be bottoming out. I tried with the normal 3 nylon spacers which clearly didn't work. Then attempted 5 spacers but still seems a tight and I haven't even torqued it.
i thought canondale is not pressfit bb30?
Evo is. They ship them with SRAM press fit bearings and covers.
Re: Cannondale Evo pressfit bb30 fit old wired SRM?
Posted: Mon Apr 16, 2012 6:02 am
by itsacarr
I have an EVO that I used the cdale wireless srm on with both black and clear spacers - I had an extra few in there with the specific spindle and bearing shield but it worked fine. And yes the bottom bracket is PF30.
It was all a tight fit which I didn't care for but it did built well.
Re: Cannondale Evo pressfit bb30 fit old wired SRM?
Posted: Mon Apr 16, 2012 11:39 am
by Scooter
itsacarr wrote:I have an EVO that I used the cdale wireless srm on with both black and clear spacers - I had an extra few in there with the specific spindle and bearing shield but it worked fine. And yes the bottom bracket is PF30.
It was all a tight fit which I didn't care for but it did built well.
Do you remember how many spacers you used? I know Liquigas runs the wireless so knew that would work just wasn't sure if there is a profile difference between wired and wireless that makes the wired harder to mount or just not possible.
Re: Cannondale Evo pressfit bb30 fit old wired SRM?
Posted: Mon Apr 16, 2012 1:42 pm
by ms6073
Even if you use the Cannondale specific pressfit 30 bottom bracket, I think you are going to have issues making this work due to the lack of clearance for the pressfit cups on the backside of the powermeter. I ended up using the Cannondale SRM bottom bracket as well as replacing an older model wireless Hollowgram SRM in order to make it work with a '12 Ridley X-night.
Re: Cannondale Evo pressfit bb30 fit old wired SRM?
Posted: Mon Apr 16, 2012 1:42 pm
by Weenie
Visit
starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com