Page 1 of 1
Black out my Red!
Posted: Wed Apr 11, 2012 4:14 pm
by G6612
I am looking for a easy way to black out my red tips on my shift levers and red stripe on the rear der. anyone have a easy process to black out?
Re: Black out my Red!
Posted: Wed Apr 11, 2012 4:47 pm
by phallenthoul
black tape.
it's easy..but not WW-istic.
Re: Black out my Red!
Posted: Wed Apr 11, 2012 4:47 pm
by Weenie
Visit
starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
Re: Black out my Red!
Posted: Wed Apr 11, 2012 5:10 pm
by CharlesM
Re: Black out my Red!
Posted: Wed Apr 11, 2012 5:17 pm
by btompkins0112
G6612 wrote:I am looking for a easy way to black out my red tips on my shift levers and red stripe on the rear der. anyone have a easy process to black out?
Easiest way is to get some wet/dry sandpaper.....sand it off and spray a light coat of clear.
Re: Black out my Red!
Posted: Wed Apr 11, 2012 6:12 pm
by adriano
vinyl
Re: Black out my Red!
Posted: Wed Apr 11, 2012 7:19 pm
by billspreston
When you guys remove the finish from your carbon parts, how are you re-clearing them?
Specifically, what products are you using and how are you spraying them? How is the quality of the finished product?
Re: Black out my Red!
Posted: Wed Apr 11, 2012 8:14 pm
by hanzo111
billspreston wrote:When you guys remove the finish from your carbon parts, how are you re-clearing them?
Specifically, what products are you using and how are you spraying them? How is the quality of the finished product?
I used a scuff pad (red) color then i used minwax polyurethane spray and lay down 3 coats scuffing lightly between each coat. After all was dry (24hr) i sanded lightly with 900 grit then buffed using car rubbing compound followed by car polish; lastly wax.
Hanzo
Re: Black out my Red!
Posted: Wed Apr 11, 2012 8:14 pm
by Weenie
Visit
starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com