Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About
It is currently Tue Aug 30, 2016 4:25 am
Recently the board software has been updated and there are some known bugs/failures:
- Avatars are currently not being displayed ✔ FIXED
- Tapatalk connection is currently broken ✔ FIXED
- Avatars cannot be uploaded ✔ FIXED

Please note that we will soon do some changes in WW board template design in case to get a fully mobile/desktop responsiveness board!
If you find more errors please post it here: http://weightweenies.starbike.com/forum/viewtopic.php?f=7&t=139062


All times are UTC+01:00





Post new topic  Reply to topic  [ 6 posts ] 
Author Message
PostPosted: Tue Mar 27, 2012 1:12 pm 
Offline

Joined: Sat Jan 08, 2011 10:33 pm
Posts: 79
Hello people wonder if you can give me some advice for my CAAD10 build.

I am not sure which bearings to go with to install my SISL crank and what the pros and cons are

-Cannondale standard steel bearings.
-Cannondale ceramic bearings.
-Sram Pressfit BB30 with ceramic bearings.

Your views are welcome thanks.

_________________
Caad9 BBQ Durace7800 build
http://weightweenies.starbike.com/forum/viewtopic.php?f=10&t=82445#p721875


Top
   
PostPosted: Tue Mar 27, 2012 1:35 pm 
Offline
User avatar

Joined: Thu May 05, 2011 3:27 am
Posts: 110
Location: USA-PA
I would go with an Enduro Zero Ceramic BB30 Kit. CAAD 10s aren't Press Fit.

_________________
Cannondale CAAD 10 63cm || Cannondale Flash Carbon 29er || Cannondale Evo 63cm


Top
   
PostPosted: Tue Mar 27, 2012 1:52 pm 
Offline

Joined: Wed Oct 28, 2009 7:13 pm
Posts: 100
Standard steel bearings ABEC-3 or better (you will never notice a difference when riding of ABEC-5+). The seals and spacers create more drag than the balls will in these bearings and it is of no benefit to performance. The only (arguably) real world benefit of ceramics is corrosion resistance, however the reports on the forums seem to indicate the ceramics are not standing up to actual use and wear out prematurely relative to steel bearings.

I have had a set of SRAM standard steel bearings with Hollowgram SISL crankset in my CAAD9 9 for more than 3 years and I ride 4-6 days per week year round. I have never done anything to these bearings post install and they still spin fine and the BB has no noises or play in it.

You can get bearings suitable for around 4$ each on Ebay should you need reaplcements, ordering them from a bicycle specialist will only cost you more $ for the same thing.


Top
   
PostPosted: Tue Mar 27, 2012 4:00 pm 
Offline

Joined: Mon Nov 17, 2008 9:56 pm
Posts: 275
AVOID the cdale ceramics at all costs (even if free).


Top
   
PostPosted: Tue Mar 27, 2012 4:40 pm 
Offline

Joined: Tue Jun 30, 2009 7:40 pm
Posts: 316
Location: CA
Get some Phil Wood bearings, they make BB30 bearings. You'll need circlips and bearing shields as I believe they just sell the individual bearings.


Top
   
PostPosted: Tue Mar 27, 2012 9:20 pm 
Offline

Joined: Sat Jun 02, 2007 1:10 am
Posts: 1845
Location: Melbourne, Australia
HSC make a full BB30 kit with shields and clips. I don't have the full kit (just the 6806 bearings) but fairwheel might

Cannondale ceramics were awful at one point, but it was costing them so much in warranty they did resource eventually. That said you might get handed an old set.

Enduro......some love them some hate them. The haters always seem to be louder


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 6 posts ] 

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. Lightning Carbon Crank BSA Compatible Bearings and Cups?

in Road

Jmdesignz2

3

282

Sat Oct 03, 2015 5:38 pm

Jmdesignz2 View the latest post

There are no new unread posts for this topic. CAAD10 Advice BB30/BB386 crank

in Road

Aaronskibeat

8

701

Mon Jan 18, 2016 8:30 pm

bikerjulio View the latest post

There are no new unread posts for this topic. Supersix Evo BB choices for SISL

in Road

tarmackev

9

462

Sun Jul 03, 2016 5:27 pm

tarmackev View the latest post

There are no new unread posts for this topic. Hollowgram SiSL Chainline or... Why I machined my spindle

in Road

seahuston

5

1021

Mon Dec 28, 2015 5:42 pm

shoemakerpom2010 View the latest post

There are no new unread posts for this topic. Hollowgram SISL chainset on new PF30 Focus Izalco Max?

in Road

KH

5

542

Thu Apr 14, 2016 7:00 pm

ms6073 View the latest post


All times are UTC+01:00


Who is online

Users browsing this forum: la rosa and 15 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited