Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About
It is currently Fri Apr 29, 2016 10:42 pm

All times are UTC+01:00





Post new topic  Reply to topic  [ 8 posts ] 
Author Message
PostPosted: Mon Apr 16, 2012 1:13 am 
Offline

Joined: Tue Dec 19, 2006 4:21 am
Posts: 232
Location: Maryland
Alright finally started to build my Evo and am attempting to install my wired SRM but it appears to be bottoming out. I tried with the normal 3 nylon spacers which clearly didn't work. Then attempted 5 spacers but still seems a tight and I haven't even torqued it.


Anyone else running a wired SRM on an Evo? Is it even possible without ghetto rigging? Looking for an excuse to go wireless lol but dont have the funds right now :(

_________________
Cannondale 2013 SuperSix EVO Black Inc w/SRM
Cannondale CAAD 10 Team custom paint
Cannondale 2009 Slice HiMod
Cannondale CAAD 8 f/s w/BB30 (last US built CAAD8)
Surly Ice Cream Truck


Top
   
PostPosted: Mon Apr 16, 2012 2:02 am 
Offline

Joined: Mon May 15, 2006 12:19 am
Posts: 560
Location: Vancouver, BC, Canada.
I seem to recall there being a BB spindle specifically for SRM.


Top
   
PostPosted: Mon Apr 16, 2012 4:28 am 
Offline

Joined: Tue Dec 19, 2006 4:21 am
Posts: 232
Location: Maryland
I have the SRM spindle and new locking for Evo.

_________________
Cannondale 2013 SuperSix EVO Black Inc w/SRM
Cannondale CAAD 10 Team custom paint
Cannondale 2009 Slice HiMod
Cannondale CAAD 8 f/s w/BB30 (last US built CAAD8)
Surly Ice Cream Truck


Top
   
PostPosted: Mon Apr 16, 2012 5:13 am 
Offline

Joined: Sun Jan 02, 2011 2:03 am
Posts: 81
[quote="Scooter"]Alright finally started to build my Evo and am attempting to install my wired SRM but it appears to be bottoming out. I tried with the normal 3 nylon spacers which clearly didn't work. Then attempted 5 spacers but still seems a tight and I haven't even torqued it.

i thought canondale is not pressfit bb30?


Top
   
PostPosted: Mon Apr 16, 2012 5:21 am 
Offline

Joined: Tue Dec 19, 2006 4:21 am
Posts: 232
Location: Maryland
steel515 wrote:
Scooter wrote:
Alright finally started to build my Evo and am attempting to install my wired SRM but it appears to be bottoming out. I tried with the normal 3 nylon spacers which clearly didn't work. Then attempted 5 spacers but still seems a tight and I haven't even torqued it.

i thought canondale is not pressfit bb30?



Evo is. They ship them with SRAM press fit bearings and covers.

_________________
Cannondale 2013 SuperSix EVO Black Inc w/SRM
Cannondale CAAD 10 Team custom paint
Cannondale 2009 Slice HiMod
Cannondale CAAD 8 f/s w/BB30 (last US built CAAD8)
Surly Ice Cream Truck


Top
   
PostPosted: Mon Apr 16, 2012 6:02 am 
Offline

Joined: Fri Nov 14, 2008 4:55 am
Posts: 573
I have an EVO that I used the cdale wireless srm on with both black and clear spacers - I had an extra few in there with the specific spindle and bearing shield but it worked fine. And yes the bottom bracket is PF30.

It was all a tight fit which I didn't care for but it did built well.

_________________
Just ride ..


Top
   
PostPosted: Mon Apr 16, 2012 11:39 am 
Offline

Joined: Tue Dec 19, 2006 4:21 am
Posts: 232
Location: Maryland
itsacarr wrote:
I have an EVO that I used the cdale wireless srm on with both black and clear spacers - I had an extra few in there with the specific spindle and bearing shield but it worked fine. And yes the bottom bracket is PF30.

It was all a tight fit which I didn't care for but it did built well.



Do you remember how many spacers you used? I know Liquigas runs the wireless so knew that would work just wasn't sure if there is a profile difference between wired and wireless that makes the wired harder to mount or just not possible.

_________________
Cannondale 2013 SuperSix EVO Black Inc w/SRM
Cannondale CAAD 10 Team custom paint
Cannondale 2009 Slice HiMod
Cannondale CAAD 8 f/s w/BB30 (last US built CAAD8)
Surly Ice Cream Truck


Top
   
PostPosted: Mon Apr 16, 2012 1:42 pm 
Offline

Joined: Fri Jul 23, 2004 8:24 pm
Posts: 1719
Location: Houston, Texas
Even if you use the Cannondale specific pressfit 30 bottom bracket, I think you are going to have issues making this work due to the lack of clearance for the pressfit cups on the backside of the powermeter. I ended up using the Cannondale SRM bottom bracket as well as replacing an older model wireless Hollowgram SRM in order to make it work with a '12 Ridley X-night.

_________________
Michael - The Anaerobic Threshold is neither...


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 8 posts ] 

All times are UTC+01:00


Who is online

Users browsing this forum: Alexa [Bot], Google Adsense [Bot], Hiram, KS59, lrdunc, Yahoo [Bot] and 33 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited