@djconnel - The Bura SL geometry and sizing will be the same as the NeilPryde Alize and Diablo. Not sure if you were meaning the NeilPryde or the Guru ... but just in case!

_________________
My cycling blog: http://girodilento.com/

Thanks! Yes -- the Guru geometry is custom, of course...

Here it is:



The "small" is more like "medium" in some other brands. But the geometry looks good: no slacker head tubes, and HTL isn't too large.

_________________
http://djconnel.blogspot.com/
Fuji SL/1
Send your data to Weight Weenie listings!

Hmm, I'd have to run a 70mm stem to get the correct saddle to bar distance on a small.

_________________
"Step forward the climber and all those who worship at the altar of lightness" - R. Millar

Odd when the best stack/reach (calculated) results in a top-tube that is 15mm longer than what I'm riding right now, which is also a perfect fit. Yet what I'm riding right now puts me on a relatively short stem. 15mm longer means a 15mm shorter stem normally, but those stack/reach results are relatively similar to the current calculated stack/reach?

_________________
Exp001

There is also an XS size listed on the website: http://www.neilprydebikes.com/bikes/diablo/bikefit.html

_________________
My cycling blog: http://girodilento.com/

Only 5mm difference in reach but a massive 30mm in stack.

_________________
"Step forward the climber and all those who worship at the altar of lightness" - R. Millar

can´t se what a frame that you think looks alitle bit like Bura SL comes in a little bit heavier then the manufacture specs, have to do with Bura SL. just because one manufacture can´t reach promised weight, it does´t mean that other can´t.

I don't get it. I'm actually impressed with the (potential) weight but that frame has enough ugly built into it for 50 bikes. Perhaps it's just me.

_________________
Used to race....got too wrinkly and old Updated: Racing again! Thought this was unlikely! Eventually, I may even have a decent race!

_________________
Exp001

taste is a objective thing

Got to ride the Bura SL and posted review on my blog for anyone interested.

_________________
Blog: http://glorycycles.blogspot.com/" onclick="window.open(this.href);return false;
Flickr: http://www.flickr.com/photos/glorycycles/" onclick="window.open(this.href);return false;

Thanks for the review cwdzoot.
Still unknown why NeilPryde had to name it with my username.Wasn't asked.

perfect, i am looking at one as well!!

jj

Thinking of buying the Neil Pryde Bura SL so looking for a bit of feedback. Any owners of the bike on this forum? If so how do you rate the Bura SL?

It's not sub 750. My small (non di2) came in around 768-9. Still, it's an awesome frame. I've had mine since late feb and I don't have any complaints.

_________________
Speedplay is the devil.