Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About
It is currently Sun Jul 24, 2016 2:10 am
Recently the board software has been updated and there are some known bugs/failures:
- Avatars are currently not being displayed ✔ FIXED
- Tapatalk connection is currently broken ✔ FIXED
- Avatars cannot be uploaded ✔ FIXED

Please note that we will soon do some changes in WW board template design in case to get a fully mobile/desktop responsiveness board!
If you find more errors please post it here: http://weightweenies.starbike.com/forum/viewtopic.php?f=7&t=139062


All times are UTC+01:00





Post new topic  Reply to topic  [ 8 posts ] 
Author Message
 Post subject: BB30 and moisture?
PostPosted: Mon Mar 05, 2012 8:49 pm 
Offline

Joined: Wed Dec 07, 2011 1:26 am
Posts: 414
Location: California's country side
Many of us use the freezer method on the crank spindle, wouldn't there be condensation as the crank come back to room temperature. trapped in the space between the 2 bearings?

I am referring to some of the BB30 shells are fully enclosed, although some have holes all over for Di2, those are not a concern.


Top
   
 Post subject: Re: BB30 and moisture?
PostPosted: Mon Mar 05, 2012 9:11 pm 
Offline

Joined: Mon Jan 24, 2011 8:09 pm
Posts: 911
PoorCyclist wrote:
Many of us use the freezer method on the crank spindle, wouldn't there be condensation as the crank come back to room temperature. trapped in the space between the 2 bearings?

I am referring to some of the BB30 shells are fully enclosed, although some have holes all over for Di2, those are not a concern.


Isn't there a hole in the bottom bracket shell to allow moisture out? Nothing is water proof, but the bearings are sealed and it shouldn't be a problem I would think?


Top
   
 Post subject: Re: BB30 and moisture?
PostPosted: Tue Mar 06, 2012 12:20 am 
Offline

Joined: Tue Dec 20, 2011 12:43 am
Posts: 282
Location: Los Angeles, CA
Zig is correct. Most if not all BB30 shells have a drainage hole that allows for excess moisture to drain.

_________________
Cervélo S2 2012 DA9000


Top
   
 Post subject: Re: BB30 and moisture?
PostPosted: Tue Mar 06, 2012 3:14 am 
Offline

Joined: Wed Dec 07, 2011 1:26 am
Posts: 414
Location: California's country side
Just looked at my BMC, 360 degrees not a hole to be found.. but the shell is machined nicely and coated with something though.


Top
   
 Post subject: Re: BB30 and moisture?
PostPosted: Tue Mar 06, 2012 3:17 am 
Offline

Joined: Tue Oct 30, 2007 5:02 pm
Posts: 642
If there is a shell between bearings as it should be the only moisture condensing would
be the moisture containing in the air trapped there and as soon as axle is worm it will go
back to the air, no worries.


Top
   
 Post subject: Re: BB30 and moisture?
PostPosted: Tue Mar 06, 2012 4:59 am 
Offline
Shop Owner

Joined: Sat Jun 13, 2009 4:02 am
Posts: 1980
Location: NoVA/DC
a nitrogen purge prior to installation would do it.


Top
   
 Post subject: Re: BB30 and moisture?
PostPosted: Tue Mar 06, 2012 5:07 am 
Offline

Joined: Wed Dec 07, 2011 1:26 am
Posts: 414
Location: California's country side
Previously with the freeze spray I can see frost on the spindle.
I have to use a temp gun to check how cold I am getting it.


I guess nothing is a true vacuum here and not really corrosive so probably doesn't matter.


I was curious about the orientation of the C-clip, would it be better to have the opening facing the bottom?


Top
   
 Post subject: Re: BB30 and moisture?
PostPosted: Tue Mar 06, 2012 8:28 pm 
Offline
User avatar

Joined: Tue Sep 26, 2006 12:37 am
Posts: 5751
Location: Phoenix Arizona
irrelevant...

The amount of moisture / humidity in the enclosed space doesnt "grow" as the temp changes. It would have been in there in any case.

whipe it before you seal it up if you want and roll.

_________________
charles@pezcyclingnews.com


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 8 posts ] 

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. Who Knows About BB30?

in Road

Valbrona

3

652

Mon Aug 24, 2015 4:39 pm

Cleaner View the latest post

There are no new unread posts for this topic. Attachment(s) Gravitas 3.1 Crankset 165/175 110 BB30

in Road

Holiday

0

329

Mon Sep 28, 2015 10:36 am

Holiday View the latest post

There are no new unread posts for this topic. Cannondale BB30 advice please

in Road

Canofale

14

1135

Sat Jun 11, 2016 12:48 am

Skylark View the latest post

There are no new unread posts for this topic. Best option for BB30 to GXP conversion (SS Evo frame)

in Road

welkman

12

631

Wed May 18, 2016 11:53 am

Juanmoretime View the latest post

There are no new unread posts for this topic. Pinarello F8 Crank Options - BB30 Possible?

in Road

CTracer

6

652

Tue Mar 29, 2016 6:28 pm

CTracer View the latest post


All times are UTC+01:00


Who is online

Users browsing this forum: Baidu [Spider], huck*this, perwjensen, zulu695 and 14 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited