Hi Weenies,

The time has come for me to invest in a suite of good tools and a few books so I can work on my two Campagnolo 11s (Chorus) bikes. Aside from the odd bit off tuning here and there, I am a complete newbie and rely on my bike shop for pretty much everything...

So, help me out What are the tools I will need to be able to completely strip/build my bikes, and also maintain them? From a learning point of view, obviously the Campagnolo website and youtube channels have a lot of information on them, but I'd love to grab a good printed book/manual on everything Campagnolo 11s - does such a thing exist?

Cheers,
Rob.

_________________
My wife said if I went riding one more time, she'd leave me.
Damn I miss her.

Don't buy upgrades, ride up grades.

only thing I can think off right now is tool to take off the bb cups.

everything else is just alen wrenches

Some of the bolts require torx "wrenches" as opposed to Allen wrenches (hex keys).

Chain tool, cassette tool...

_________________
Cervelo R3, Campagnolo Chorus/Record mix... pastatrails.blogspot.com
And you can call me Macktastik Honey Pete Kicks, thank you.

Did you get the instruction manuals for all Campagnolo components on your bike? AFAICT those list the tools that are required, e.g., Torx T25, 5mm Allen wrench.

I like the 10mm crank tool. Don't waste the money on the chain tool, just use the KMC 11 quick links. Otherwise all pretty standard....although I am looking at the bearing puller for the cranks, that would be nice

Campy or compatible chain tool unless using KMC chains. Then you may want missing link pliers for chain removal.
B B cup tool - spanner same as Shimano torqued with weighing scale or use Campy socket with large torque wrench.
Crank spindle bolt tool - long Allen wrench (Pedro's is good) torqued with a weighing scale or Campy long Allen bit torqued with large torque wrench.
Campy compatible cassette tool.
Small torque wrench with a T25 Torx bit and hex bits for brifters and brakes. Useful for stems and other things too.
I found a short extension was necessary between the wrench and the torx bit for the brifters.
Cable cutter or Dremel.
You may or may not require a pedal spanner. An Allen key is sufficient for most pedals.

_________________
r o y g b i v