Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About
It is currently Mon Jun 27, 2016 4:23 pm
Recently the board software has been updated and there are some known bugs/failures:
- Avatars are currently not being displayed ✔ FIXED
- Tapatalk connection is currently broken ✔ FIXED
- Avatars cannot be uploaded ✔ FIXED

Please note that we will soon do some changes in WW board template design in case to get a fully mobile/desktop responsiveness board!
If you find more errors please post it here: http://weightweenies.starbike.com/forum/viewtopic.php?f=7&t=139062


All times are UTC+01:00





Post new topic  Reply to topic  [ 6 posts ] 
Author Message
PostPosted: Thu Mar 01, 2012 2:41 pm 
Offline

Joined: Sun Mar 27, 2011 8:16 pm
Posts: 437
When new the System Six came with the option of a wired SRM- and if you read through the user manual for the system on the SRM website it recommends and shows you how to drill a Six13 frame for an internal wire install.

Does anyone know if the System Six's were/could be drilled for internal cabling?

In the photograph on the SRM website it shows the cables coming out from behind the headtube badge- was/is there a hole there, or is SRM suggesting that you drill one?

I have a wired SRM, and am getting Di2, and would love to run the cables internally- my concern is with getting inside the frame at the head-tube end, as that is all carbon to my knowledge.

Image


Top
   
PostPosted: Thu Mar 01, 2012 2:46 pm 
Offline

Joined: Tue Jan 13, 2009 2:35 am
Posts: 553
My System 6 has a different headtube badge from what is in that photo.

That photo looks like the headtube badges on my Six-13. And if I remember correctly, those headtube badges were designed to cover the holes in the headtube that were used to install the bladders for expanding the carbon tube against the aluminum tubes.

If you remove the fork, you should be able to look into the headtube and see if the badge is covering such a hole. If it is, then there should be no issue with drilling through the badge or pulling it out some (as it appears in the photo.) I believe the badge is only there for cosmetics.


Top
   
PostPosted: Thu Mar 01, 2012 3:04 pm 
Offline

Joined: Sun Mar 27, 2011 8:16 pm
Posts: 437
It's definitely a Six13 in the photographs.

I'll drop the fork out of my System Six tonight and have a look, I suspect it will be one solid structure though, as it's all carbon.


Top
   
PostPosted: Thu Mar 01, 2012 7:51 pm 
Offline
User avatar

Joined: Sat Nov 14, 2009 6:30 am
Posts: 856
Location: So Cal
System Six is all carbon up front. It won't have the holes like the Six 13 did.


Top
   
PostPosted: Thu Mar 01, 2012 8:20 pm 
Offline

Joined: Sun Mar 27, 2011 8:16 pm
Posts: 437
Correct:

Image

Back to plan b) cable ties, lots and lots of cable ties


Top
   
PostPosted: Fri Mar 02, 2012 11:25 am 
Offline

Joined: Sun Mar 27, 2011 8:16 pm
Posts: 437
Has anyone drilled a frame for internal cabling such as this one?


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 6 posts ] 

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. 2015 CAAD10 rear brake cabling parts question

in Road

CAAD997

5

506

Tue Feb 02, 2016 12:24 am

CAAD997 View the latest post

There are no new unread posts for this topic. Internal Cable Sheathing

in Road

rossjm11

9

436

Thu Feb 04, 2016 5:13 pm

topflightpro View the latest post

There are no new unread posts for this topic. Attachment(s) Internal or external DI2 battery

[ Go to page: 1 2 ]

in Road

muntos

15

1285

Thu Jun 02, 2016 11:57 am

rodriguo View the latest post

There are no new unread posts for this topic. Handlebar with internal cable routing and DI2

in Road

muntos

5

606

Sun Nov 15, 2015 3:28 am

mimason View the latest post

There are no new unread posts for this topic. Internal / External Cable routing

in Road

briantumma

7

607

Fri Jan 15, 2016 12:17 pm

briantumma View the latest post


All times are UTC+01:00


Who is online

Users browsing this forum: Bing [Bot], Bluecoupe, Exabot [Bot], froze, josephtroppo, Stuartclark1977, Wheever, Yahoo [Bot] and 19 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited