HOT: Active* forum members generally gain 5% discount at starbike.com store!
Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Articles FAQ Contact About




Post new topic Reply to topic  [ 69 posts ] 
Go to page Previous  1, 2, 3, 4, 5  Next
Author Message
PostPosted: Mon Apr 25, 2011 1:29 pm 
Offline

Joined: Fri May 04, 2007 5:27 pm
Posts: 595
@KHD

Thanks - I know they weren't compliant (or at least some of those being 'made available') in October for Worlds. Good to see they are now, the one I have hanging up (sans sticker) looks like a decent helmet.

_________________
Don't be alarmed.


Top
 Profile  
 
Posted: Mon Apr 25, 2011 1:29 pm 


Top
  
 
PostPosted: Mon Apr 25, 2011 10:58 pm 
Offline
User avatar

Joined: Mon Dec 20, 2010 9:25 am
Posts: 146
Location: Sydaaneeeee
Really disappointed in the Aussie availability.
I've been getting told for months (and as recently as yesterday) that it's going through the approval process and the hold up was just where the straps are "buckled" (or not in this case) together under the ear.
Seems that may all be BS?

Looks like I'll have to turn my attention to the Giro Aeon instead.
Released later and maybe available to purchase sooner (assuming it passes AS testing)... :?


Top
 Profile  
 
PostPosted: Wed Apr 27, 2011 3:06 pm 
Offline

Joined: Wed Apr 27, 2011 2:50 pm
Posts: 1
Does anybody know if there have been any changes with the release of the Prevail?? And on a slightly related note, if my helmet is Aus certified will it be allowed to be raced in USA??
Cheers!


Top
 Profile  
 
PostPosted: Thu Apr 28, 2011 2:34 am 
Offline
User avatar

Joined: Mon Dec 27, 2010 2:04 pm
Posts: 177
heresjason:

Changes? Not for the last week or so, no. The situation is as it was.

I don't know if you'll be able to race in the US with an Aus certified helmet, but one of the other forum members will most likely be able to answer that one.

_________________
Disclaimer:
This post may contain my opinion.
My opinion is just that - mine. My opinions are based on my experiences, not yours. Yes, I do have experience, I have thought this through and yes, that really is what I think.


Top
 Profile  
 
PostPosted: Fri Apr 29, 2011 3:35 pm 
Offline
User avatar

Joined: Wed Oct 06, 2004 6:55 pm
Posts: 1892
Location: Vienna, AUT
Just thought I would toss in a comment about the Prevail based on the helmet tests done by Roadbike magazine (Germany) in the recent issue:

The thermoscans conducted on how well each helmet's air flow is rated the Prevail as basically the hottest helmet (temp, not looks) of all brands/models/price classes tested (18 in total). The thermo picture looks like a head of lava.

The Prevail was compared in the Top Class category with the Casco Ares Road, Lazer Helium RD, Met Sine Thesis, Uvex FP3 and the Giro Prolight (which had also surprisingly better air flow in the testing than the Specialized...)

All other categories such as fit, comfort and workmanship were top rated for the Prevail, the air flow killed it in the comparison though.


Top
 Profile  
 
PostPosted: Sat Apr 30, 2011 1:55 am 
Offline
Moderator
User avatar

Joined: Sat Mar 14, 2009 6:08 am
Posts: 7547
Location: Geeeelong!
SvenNijs - I've heard that Giro are not bothering certifying their Aeon here. Which would be a massive pity, as it's a lovely helmet.

The c50 I liked, however those rubber cushions are terrible! Ripped my hair each time I removed the helmet, then they eventually pulled themselves off :?

_________________
http://www.nicksquillari.com.au Forum Jedi


Top
 Profile  
 
PostPosted: Sat Apr 30, 2011 2:14 am 
Offline
User avatar

Joined: Mon Dec 27, 2010 2:04 pm
Posts: 177
TP:

Yes, that happened to me for the first few wears until I realised that it was best to take the helmet off by swinging the rear pivot points up as you pull the helmet off forward. After that, no issue.

Personally I think the rubber gel grippers were a good idea - for all day riding, but not great for the real world of one or two hours on the bike or stop / start riding.

I think you're right, Giro (or should I say, the Australian importers) probably won't go through with Approvals for the Aeon. Pity as it looks like Giro's version of an Lazer RD.

_________________
Disclaimer:
This post may contain my opinion.
My opinion is just that - mine. My opinions are based on my experiences, not yours. Yes, I do have experience, I have thought this through and yes, that really is what I think.


Top
 Profile  
 
PostPosted: Sat Apr 30, 2011 2:25 am 
Offline
User avatar

Joined: Mon May 25, 2009 9:34 am
Posts: 403
Location: Melb, Australia
Stolichnaya wrote:
Just thought I would toss in a comment about the Prevail based on the helmet tests done by Roadbike magazine (Germany) in the recent issue:

The thermoscans conducted on how well each helmet's air flow is rated the Prevail as basically the hottest helmet (temp, not looks) of all brands/models/price classes tested (18 in total). The thermo picture looks like a head of lava.

The Prevail was compared in the Top Class category with the Casco Ares Road, Lazer Helium RD, Met Sine Thesis, Uvex FP3 and the Giro Prolight (which had also surprisingly better air flow in the testing than the Specialized...)

All other categories such as fit, comfort and workmanship were top rated for the Prevail, the air flow killed it in the comparison though.


It's probably asking a lot of you, but would you be able to upload some scans of the article at all?

_________________
CAAD10 Di2


Top
 Profile  
 
PostPosted: Sat Apr 30, 2011 2:35 am 
Offline

Joined: Tue Jun 22, 2004 11:42 pm
Posts: 3914
Location: lat 38.9677 lon 77.3366
I am very perplexed by that review. I found the airflow to be better than any helmet I've used. Further the airflow is best were I need it most, no sweat dripping in my eyes. Never seen the review but if they are looking at the helmet with thermal imaging would not the helmet showing greatest heat loss be the coolest?

_________________
WW Velocipedist Gargantuan


Top
 Profile  
 
PostPosted: Sat Apr 30, 2011 9:28 am 
Offline
Moderator
User avatar

Joined: Sat Mar 14, 2009 6:08 am
Posts: 7547
Location: Geeeelong!
khdroberts - tried that.

Appears my masses of curly hair was still too much for them :(

_________________
http://www.nicksquillari.com.au Forum Jedi


Top
 Profile  
 
PostPosted: Sat Apr 30, 2011 10:48 pm 
Offline
User avatar

Joined: Mon Dec 20, 2010 9:25 am
Posts: 146
Location: Sydaaneeeee
Tinea Pedis wrote:
SvenNijs - I've heard that Giro are not bothering certifying their Aeon here. Which would be a massive pity, as it's a lovely helmet.


I'll check them both out when I'm in Europe and see what we're missing out on.


Top
 Profile  
 
PostPosted: Mon May 02, 2011 8:20 am 
Offline
User avatar

Joined: Wed Oct 06, 2004 6:55 pm
Posts: 1892
Location: Vienna, AUT
I'll scan the RoadBike magazine article tomorrow and post it / send it to those who want it.


Top
 Profile  
 
PostPosted: Tue May 03, 2011 2:25 am 
Offline
User avatar

Joined: Mon Dec 27, 2010 2:04 pm
Posts: 177
Well, what do you know - turns out the Prevail will be available in Aus - and very soon too by the sounds of it.

Happy to say that I was wrong when I said it'd never happen!

:thumbup:

_________________
Disclaimer:
This post may contain my opinion.
My opinion is just that - mine. My opinions are based on my experiences, not yours. Yes, I do have experience, I have thought this through and yes, that really is what I think.


Top
 Profile  
 
PostPosted: Thu May 05, 2011 7:44 am 
Offline
User avatar

Joined: Mon Dec 27, 2010 2:04 pm
Posts: 177
Hi all,

I can now confirm that limited sizing / colour range is now available of the Prevail in Australia - several LBSs in Melbourne have some stock - the helmet has been redesigned (specifically, the vent at the rear of the ear has now been removed).

Hope that helps everyone out!

:D

_________________
Disclaimer:
This post may contain my opinion.
My opinion is just that - mine. My opinions are based on my experiences, not yours. Yes, I do have experience, I have thought this through and yes, that really is what I think.


Top
 Profile  
 
PostPosted: Thu May 05, 2011 9:41 am 
Offline
User avatar

Joined: Mon Sep 08, 2008 7:44 am
Posts: 418
Location: Oztralien
Where can i get one and at what price?
Birthday coming up and need a new lid. Shop in Geelong cant seem to get anything from Spec.
Waiting for test saddles to come in since Dec. 2010.


Top
 Profile  
 
Posted: Thu May 05, 2011 9:41 am 


Top
  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 69 posts ] 
Go to page Previous  1, 2, 3, 4, 5  Next


Who is online

Users browsing this forum: ALAN Carbon+ and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. Helmet from Indonesia

in MTB

Swiss

8

941

Thu Nov 14, 2013 6:22 pm

bombertodd View the latest post

There are no new unread posts for this topic. ASSOS Helmet

in Road

fifarafa

12

1822

Thu Jan 30, 2014 6:58 pm

GramStrong View the latest post

There are no new unread posts for this topic. POC Octal Helmet

[ Go to page: 1, 2, 3 ]

in Cycle Chat

MuppetMower

43

3304

Wed Jul 16, 2014 11:27 am

Cuki View the latest post

There are no new unread posts for this topic. painting helmet?

in Road

Zak

4

546

Wed May 07, 2014 9:25 pm

mile2424 View the latest post

There are no new unread posts for this topic. Best Ventilated Helmet

[ Go to page: 1, 2 ]

in Road

Rick

28

2126

Thu Aug 14, 2014 11:36 am

mdeth1313 View the latest post


It is currently Thu Aug 21, 2014 3:36 am

All times are UTC + 1 hour




Advertising   –  FAQ   –  Contact   –  Convert   –  About

© Weight Weenies 2000-2013
hosted by starbike.com


How to get rid of these ads? Just register!


Powered by phpBB