Questions about bike hire abroad and everything light bike related. No off-topic chat please
Moderators: robbosmans, Moderator Team
-
ChristianK
- Posts: 30
- Joined: Wed Sep 08, 2010 8:39 am
by ChristianK on Tue Aug 02, 2011 6:01 am
fireball05 wrote:Christian,
When did they switch to "newer hub components" I just got my set about 2 months ago and am wondering if I have "new" or "old".
Thanks!
This review has more information about the front hub and how the original design has limited access to the set screw. I have never had to access that set screw. My updated hub still has limited access with a normal allen tool, but I can tell that the trueness has improved.
Being that this review was published more than two months ago, I would suspect that you have the updated design. It cannot hurt to call MF to ask. They keep all serial numbers on file and should be able to track what you have.
Christian.
-
ricerocket
- Posts: 596
- Joined: Mon Sep 27, 2010 8:38 am
by ricerocket on Tue Aug 02, 2011 7:52 am
ChristianK wrote:My updated hub still has limited access with a normal allen tool, but I can tell that the trueness has improved.
The set screw adjusts bearing preload though, I'm not sure how trueness relates?
-
ChristianK
- Posts: 30
- Joined: Wed Sep 08, 2010 8:39 am
by ChristianK on Tue Aug 02, 2011 4:53 pm
ricerocket wrote:ChristianK wrote:My updated hub still has limited access with a normal allen tool, but I can tell that the trueness has improved.
The set screw adjusts bearing preload though, I'm not sure how trueness relates?
My hubs went from the original design to the newer design and part of that process helped increase trueness of the front wheel. I was not explained the details, I just received an e-mail from Mad Fiber stating that this was a consequence of the hub work/new hub design. I was a bit skeptical as well, but sure enough...the same serial # is on the front wheel and the trueness is improved.
They may have the ability to address wheel trueness upon servicing the front hub, dunno.
Christian.
-
djm
- Posts: 1403
- Joined: Thu May 14, 2009 12:19 pm
- Location: Norway
by djm on Tue Aug 09, 2011 11:46 pm
Without having read all the 28 pages of this thread I risk asking my question
Are these wheels really noisy?
I believe some guy next to me in a race this weekend were riding Madfiber wheels, and whenever he'd get up from his saddle and throw his bike from side to side there would be one hell of a noise.. Something wrong or by design?
-
lasrever
- Posts: 136
- Joined: Tue Jul 27, 2010 9:47 pm
by lasrever on Wed Aug 10, 2011 2:32 am
laager wrote:djm wrote:Are these wheels really noisy?
Mine are silent.
think it may be related to rider weight (i'm 205) - mine are no nosier than any other deep dish wheel in most situations - there is a bit more noise when standing but they certainly have a distinct sound when you go over a pot-hole or whatnot.
it's hard to describe and takes a bit of getting used to but given where i live is strewn with cobbles and half-paved-over industrial train tracks i got used to it pretty quickly.
the closest i could describe it as is the 'thunk' when a truck suspension bottoms out and hits the frame bumper, disconcerting the first few times but then you realize it is what it is and everything is fine.
these are, however, really awesome wheels.
thanks,
nick
-
djm
- Posts: 1403
- Joined: Thu May 14, 2009 12:19 pm
- Location: Norway
by djm on Wed Aug 10, 2011 10:42 pm
I guess it could be related to rider weight perhaps then..
The guy with the noisy set was easily over 200 pounds.
-
bricky21
- Posts: 1403
- Joined: Tue Sep 14, 2010 3:28 pm
by bricky21 on Sat Aug 13, 2011 4:12 pm
Please keep us posted as to their response.
FWIW I have seen weight differences much greater than 15g. when weighing things on different scales and also with different placements on the scale(hanging a frame from the dropout vs. the head tube vs. the top tube).
Be sure to get as much detail as you can about how they weigh their wheels. Scale make/model/date of manufacture, environmental conditions of the room where they weigh the wheels, density of the structure on which they place/hang their scale, and most importantly the qualifications of those who are doing the weighing and those who are monitoring all conditions related to the accuracy of the weighing.
-
CharlesM
- Posts: 5759
- Joined: Tue Sep 26, 2006 12:37 am
- Location: Phoenix Arizona
by CharlesM on Sat Aug 13, 2011 9:25 pm
They're quoting 1085 per set and you have a set that is 1088... And they're doing running design tweaks.
Really, honestly, that's laughable.
-
CharlesM
- Posts: 5759
- Joined: Tue Sep 26, 2006 12:37 am
- Location: Phoenix Arizona
by CharlesM on Sat Aug 13, 2011 10:43 pm
They've updated the hub internals and made other changes beyond simple weight reduction through cleaning up the process and not all of those changes lowered weight. You should email them again. post the reply they give you. past that, (and I dont mean this to sound overly mean) you're just hearing your own gums flapping too.
If I'm madfiber though I'm not going to tear apart a wheel looking for a couple of grams when nothing else is wrong.
-
gumgardner
- Posts: 3496
- Joined: Sat Jan 06, 2007 9:47 pm
- Location: Pittsburgh
by gumgardner on Fri Aug 19, 2011 11:26 am
Part of the nice thing about the madfiber wheels was the price point for this lightweight high profile wheel. It looks like they jacked up the price to closer to $3,000 for the standard bearings and over $3,000 for the ceramic version. Is this price increase related to all these new improvements? That being said, one should steer clear of stores selling them for the original 2,500?
-
ricerocket
- Posts: 596
- Joined: Mon Sep 27, 2010 8:38 am
by ricerocket on Fri Aug 19, 2011 11:50 am
gumgardner wrote:hat being said, one should steer clear of stores selling them for the original 2,500?
Probably not, intro pricing is pretty common for the first year, be it cars, boats, planes, motorcycles, etc.