Page 12 of 33
Re: Garmin Out-in-front Mounts Ad Nauseum
Posted: Wed Apr 16, 2014 7:43 pm
by Zigmeister
So at the Otter show, Barfly has a new released Bar Fly Sli. Basically, very similar to the 2.0, but it has small indentations to allow you to secure/fasten a Shimano Di2/EPS junction box on the underside of the mount below the computer/bottom side.
http://www.barflybike.com/bar-fly-20-installation-tips/So, they have the install tips for the 2.0 page where it shows a similar idea for the other mount, but this is supposed to be a more graceful/better implemented. No photos available of a Di2 junction mounted to this new one though I could find anywhere. Having a hard time envisioning what they did exactly now to this new one. You can pre-order it, but it is like $50...ouch, for plastic.
Interesting. Never though of trying to strap my mount another place, but would like it better there than that rubber band strap that sometimes falls off I'm using now on the stem.
Can mount a camera under it now also.
Re: Garmin Out-in-front Mounts Ad Nauseum
Posted: Wed Apr 16, 2014 9:43 pm
by BikeNerd2453
Zigmeister wrote:So at the Otter show, Barfly has a new released Bar Fly Sli. Basically, very similar to the 2.0, but it has small indentations to allow you to secure/fasten a Shimano Di2/EPS junction box on the underside of the mount below the computer/bottom side.
http://www.barflybike.com/bar-fly-20-installation-tips/So, they have the install tips for the 2.0 page where it shows a similar idea for the other mount, but this is supposed to be a more graceful/better implemented. No photos available of a Di2 junction mounted to this new one though I could find anywhere. Having a hard time envisioning what they did exactly now to this new one. You can pre-order it, but it is like $50...ouch, for plastic.
Interesting. Never though of trying to strap my mount another place, but would like it better there than that rubber band strap that sometimes falls off I'm using now on the stem.
Can mount a camera under it now also.
2.0 could mount the junction box too, I don't know that this one is much different in how it attaches.
Also the Sli is machined alloy, like the K-Edge system, so maybe that makes the price a bit more palatable to you?
Re: Garmin Out-in-front Mounts Ad Nauseum
Posted: Wed Apr 16, 2014 9:43 pm
by Weenie
Visit
starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
Re: Garmin Out-in-front Mounts Ad Nauseum
Posted: Thu Apr 17, 2014 10:08 pm
by goodboyr
Can you mount camera, di2 box and edge all at same time?
Re: Garmin Out-in-front Mounts Ad Nauseum
Posted: Tue Apr 22, 2014 3:55 pm
by Lewis
goodboyr wrote:Can you mount camera, di2 box and edge all at same time?
Will be like some kind of rolling film studio!
Till quest - I will take a photo and upload it.
Sent from my iPhone using Tapatalk
Re: Garmin Out-in-front Mounts Ad Nauseum
Posted: Tue Apr 22, 2014 8:36 pm
by Tillquist
goodboyr wrote:Can you mount camera, di2 box and edge all at same time?
No mount for camera.......
You can mount the Di2 box like this.......
For Campagono EPS and Shimano Di2 box, install a small strip of 3M dual side tape.
Re: Garmin Out-in-front Mounts Ad Nauseum
Posted: Wed Apr 23, 2014 2:48 pm
by Lewis
Tillquist wrote:Lewis wrote:Have you created one to fit the OEM Canyon Ritchey stem yet buddy?
Do you have a picture of that stem ?
Here we go buddy. Will this be ok?
Sent from my iPhone using Tapatalk
Re: Garmin Out-in-front Mounts Ad Nauseum
Posted: Wed Apr 23, 2014 3:13 pm
by Tillquist
Lewis wrote:Tillquist wrote:Lewis wrote:Have you created one to fit the OEM Canyon Ritchey stem yet buddy?
Do you have a picture of that stem ?
Here we go buddy. Will this be ok?
Sent from my iPhone using Tapatalk
Yes i have A Mount for that stem
Re: Garmin Out-in-front Mounts Ad Nauseum
Posted: Mon May 26, 2014 6:17 pm
by Tillquist
New mount coming soon......
Garmin Mount
Posted: Sun Jun 08, 2014 6:31 pm
by TheCannibal
Looking into Garmin mounts has anyone used a BarFly 3.0 MTB on a road bike mounted to the left side of the bars (i.e. flipped) to give a stubby mount out front?
Re: Garmin Out-in-front Mounts Ad Nauseum
Posted: Tue Jun 24, 2014 4:44 pm
by MNX1024
Does anyone know of any of the current mounts are compatible with the 1000, especially a barfly one?
Re: Garmin Out-in-front Mounts Ad Nauseum
Posted: Tue Jun 24, 2014 4:49 pm
by goodboyr
K edge XL mount.
Re: Garmin Out-in-front Mounts Ad Nauseum
Posted: Wed Jun 25, 2014 6:24 am
by spookyload
Tilquist...does the one for the Plasma work for the Cinelli Ram too? Bar Fly has been sitting on my order since 6 April saying they are waiting on plastic. Tired of waiting on them.
Re: Garmin Out-in-front Mounts Ad Nauseum
Posted: Wed Jun 25, 2014 6:30 am
by JasperGr
Tillquist, is there any news for the release date of the c260 mount?
Verzonden vanaf mijn iPhone met behulp van Tapatalk
Re: Garmin Out-in-front Mounts Ad Nauseum
Posted: Wed Jun 25, 2014 8:08 am
by Tillquist
JasperGr wrote:Tillquist, is there any news for the release date of the c260 mount?
Verzonden vanaf mijn iPhone met behulp van Tapatalk
Yes, i got them......
Re: Garmin Out-in-front Mounts Ad Nauseum
Posted: Wed Jun 25, 2014 8:08 am
by Weenie
Visit
starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
Re: Garmin Out-in-front Mounts Ad Nauseum
Posted: Wed Jun 25, 2014 12:14 pm
by JasperGr
Nice, may I ask what the sellingprice is and where I can order it?
Verzonden vanaf mijn iPhone met behulp van Tapatalk