Moderators: maxim809, Moderator Team
-
gfeldy
- Posts: 268
- Joined: Fri Aug 08, 2014 6:00 pm
by gfeldy on Fri Jun 10, 2016 3:10 pm
Looks pretty solid considering you stripped all the paint yourself!!
tonytourist wrote:Have a few adjustments to make (hood angle)
~GFeldy~
S Works Tarmac w/ EPS
S Works Epic HT Blurple tuned
Kitsbow
S Works Epic Blurple tuned - Sold
FS-i - Sold
Scalpel custom - Sold
EVO - Sold
-
ansgar
- Posts: 2
- Joined: Fri Jun 10, 2016 4:58 pm
by ansgar on Fri Jun 10, 2016 5:15 pm
Specialized S-Works Tarmac SL 3
SRAM Red eTap Groupset
S-Works Toupe Saddle
S-Works Seatpost
S-Works Aerofly Bar
Syntace F109 Stem
Ritchey Carbon Superlogic Wheels (looking for an upgrade - does anyone sell Roval CLX 60 or 64?)
Conti GP 4000 S II
Custom paint by cycleart-berlin
-
junchen
- Posts: 348
- Joined: Fri Jun 12, 2015 6:21 pm
by junchen on Fri Jun 10, 2016 5:37 pm
@ansgar the clx64 would not fit your frame. It's v w.i.d.e. Info was given by my local specialized shop when I enquired. Also what wt is your bike.?
Sent from my SM-G920I using Tapatalk
-
ansgar
- Posts: 2
- Joined: Fri Jun 10, 2016 4:58 pm
by ansgar on Sat Jun 11, 2016 10:31 am
junchen wrote:@ansgar the clx64 would not fit your frame. It's v w.i.d.e. Info was given by my local specialized shop when I enquired. Also what wt is your bike.?
Sent from my SM-G920I using Tapatalk
mh really? would be surprised if not. sagan rides a tarmac w clx 64... i wonder if the sl3 is narrower in comparison to the "sl5"?
-
junchen
- Posts: 348
- Joined: Fri Jun 12, 2015 6:21 pm
by junchen on Sat Jun 11, 2016 3:31 pm
Check out the widest rim width. If I didn't recall wrongly, the clx64 can only fit the vias and new tarmac (sl5).
Sent from my SM-G920I using Tapatalk
-
tonytourist
- Posts: 1427
- Joined: Sat Oct 10, 2009 7:13 am
- Location: 90039
by tonytourist on Sat Jun 11, 2016 9:55 pm
Wider rims don't fit some of the older bikes. I know on my SL4 a Zipp 303 wouldn't fit, but my Enve 3.4s had no issues. The CLX64 is really wide, I doubt that it would work on the SL3 due to the chain stay design.
-
Sim0n0
- Posts: 17
- Joined: Mon Sep 16, 2013 7:08 am
-
Sim0n0
- Posts: 17
- Joined: Mon Sep 16, 2013 7:08 am
by Sim0n0 on Wed Jun 15, 2016 10:20 am
liam7020 wrote:Taken a notion of buying either an Astana or Tinkoff S-Works Tarmac 2016 frameset. I like the colour schemes on both frames but I' like to be able to remove the team decals which appear to be positioned at the top/front side of the seat tube. Does anyone know if these little team decals are under clear coat on the S-Works Tarmac? Ta
KWalker wrote:Yes, under the clear.
No not under the clear, I've removed mine. The only logo under the clear is the UCI
-
dunMisk
- Posts: 18
- Joined: Sun Mar 06, 2016 10:23 pm
by dunMisk on Mon Jul 11, 2016 8:48 pm
I own a sl4 tarmac pro. I recently did a small ride on an cervelo S3. I was suprised by the noticeable stiffer bottom bracket. Does anybody have any comparison knowledge about SL4 pro vs. SL5 pro vs. SL5 S-works bb stiffness? Im on the 56. thanxs.
-
dacrazy1
- Posts: 113
- Joined: Thu Jul 26, 2012 9:12 pm
- Location: Switzerland