GALLERY ! Your Crossbikes
Moderators: maxim809, Moderator Team
thats a hot specialized. I really like the red cables on it. Very nice job. Do you have a frame weight or a complete bike weight for her?
jeremy
jeremy
resurrected an old topic i know, but it seemed fitting
finally got a pic of the current build of my Planet-X Uncle John. Weighs about 20lbs(9.1kg) by the very scientific bathroom scale method, so not really light enough for this site nor jeremyb's gallery! Seatpost desparately needs changing as it weighs a ton, and I should really trim down the steerer tube (which is artfully hidden in the pic...). Got a few other changes planned which ought to drop another pound or so off it, but they're not likely to happen any time soon.
It's by the side of the road because I was marshalling for the BUSA 25mi TT on Saturday and it just seemed the most appropriate way of getting there
approx build list: Planet X UncleJohn frame, Project 2 CX forks, FSA Orbit X headset, Salsa Bell Laps, Planet X 3D forged stem, Record Ergos and rear mech, Avid Shorty Ti, Ritchey WCS cranks, 42T ring, 13-28 cassette, American Classic/Sapim Race/Velocity Fusion wheelset
finally got a pic of the current build of my Planet-X Uncle John. Weighs about 20lbs(9.1kg) by the very scientific bathroom scale method, so not really light enough for this site nor jeremyb's gallery! Seatpost desparately needs changing as it weighs a ton, and I should really trim down the steerer tube (which is artfully hidden in the pic...). Got a few other changes planned which ought to drop another pound or so off it, but they're not likely to happen any time soon.
It's by the side of the road because I was marshalling for the BUSA 25mi TT on Saturday and it just seemed the most appropriate way of getting there
approx build list: Planet X UncleJohn frame, Project 2 CX forks, FSA Orbit X headset, Salsa Bell Laps, Planet X 3D forged stem, Record Ergos and rear mech, Avid Shorty Ti, Ritchey WCS cranks, 42T ring, 13-28 cassette, American Classic/Sapim Race/Velocity Fusion wheelset
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
yeah, I have to admit the classy paint was one factor in choosing the frame (the major one being cost). and then I decided I had to have the rims in red to match...
yep, the Kona fork is heavy when you compare it to the various carbon offerings out there, but it's light compared to the mountain suspension forks I'm used to! and it feels nice to ride, so I'm not bothered even though I know it could be a lot lighter
yep, the Kona fork is heavy when you compare it to the various carbon offerings out there, but it's light compared to the mountain suspension forks I'm used to! and it feels nice to ride, so I'm not bothered even though I know it could be a lot lighter
Great Bike LLyod! I was going to comment on the fork too, but now it seems like beating a dead horse.
Here is my new CX bike.
lloydp:
i had to buy those konas by myself, no sponsoring. in a race, i broke one kona fork(i had two orange jakes)which is nearly impossible, but i did it. then i had to buy a new fork and had no money. i took a black steel fork(not straight), it was at least 300 grams lighter. such forks can be bought for under 100 euro new. the kona fork gives no damping because it is so solid. after the fork change, i tried to always ride with the bike with the lighter fork because it felt a lot better.
i had to buy those konas by myself, no sponsoring. in a race, i broke one kona fork(i had two orange jakes)which is nearly impossible, but i did it. then i had to buy a new fork and had no money. i took a black steel fork(not straight), it was at least 300 grams lighter. such forks can be bought for under 100 euro new. the kona fork gives no damping because it is so solid. after the fork change, i tried to always ride with the bike with the lighter fork because it felt a lot better.
wow, simon, breaking one of those forks is quite impressive! i guess i don't have much experience of other cross forks to compare to, so i probably have no idea what i'm missing. any chance it's possible to get straight-blade forks like the replacement one you had? i know it's irrational, but i prefer the look of a straight one on this frame...
I don't specifically know the fork Simon is speaking of, but IF makes awesome straight blade CX forks, as does interloc as seen here:
http://www.interlocracing.com/forks.html
http://www.interlocracing.com/forks.html
or Woundup or Easton or Alpha Q if you want carbon.
Here's my new Poprad. Stock with M540 pedals and a king hs, weight was a tick over 22lbs (I know, definately not weenie). However, I like the ride of it so much that I may pick up a second wheelset and just use it as my main ride as well, or atleast until I graduate. If thats the case, then look out. I'll either go full DA or maybe Chorus. Not sure if my Proton wheels will hold up to the abuse though (I'm a little on the heavy side ride now). Other than that, I swapped out the carbon post for a thomson for looks but also because the carbon one was slipping very badly. But for now, I'll ride her as is. I'm also trying to fix my severe fork chatter problem. Maybe a carbon fork will be in my future.
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com