Glueing tubulars [the tubular thread]
Moderator: robbosmans
Forum rules
The spirit of this board is to compile and organize wheels and tires related discussions.
If a new wheel tech is released, (say for example, TPU tubes, a brand new tire, or a new rim standard), feel free to start the discussion in the popular "Road". Your topic will eventually be moved here!
The spirit of this board is to compile and organize wheels and tires related discussions.
If a new wheel tech is released, (say for example, TPU tubes, a brand new tire, or a new rim standard), feel free to start the discussion in the popular "Road". Your topic will eventually be moved here!
- HammerTime2
- Posts: 5813
- Joined: Thu May 04, 2006 4:43 pm
- Location: Wherever there's a mountain beckoning to be climbed
I would retire it, period. I wouldn't use it for training/easier rides or as a spare. But that's me.
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
I had been on my clinchers for quite a few rides, as i was getting ready to clean the whole drivetrain. They are Fulcrum Racing 3s, tyres are Pro3 Race, with latex inners. For a clincher setup i think it is right up there...but fark me did my jaw drop for the 34th time when i swapped back the tubular set ( Ambrosio Nemesis/Record/DT Aerolite + Veloflex Criterium )...It just can't be that much better...It's just ridiculous, the difference..in every aspect.
How can anyone be without some sweet riding tubulars??
Not to mention I'm always a bit anxious when on clinchers..whereas when on tubbies i just don't give a fuk, and can really enjoy the ride..
I just had to share...
How can anyone be without some sweet riding tubulars??
Not to mention I'm always a bit anxious when on clinchers..whereas when on tubbies i just don't give a fuk, and can really enjoy the ride..
I just had to share...
Hi,
You can mount them on a spare rim/wheel and slightly inflate them or you can just as well lay them on a large shelf, floor, in big cardboard box, whatever.
For as long as: the area is dry, there are no UV rays (not even from artificial lightsources), tubulars are in no way constrained (to avoid knicks in the sidewalls) and you're not going to keep them there for decades ( ), you'll be fine.
AFAIK they are the only one but maybe FMB or Dugast do so as well. It would be nice if more manufacturers followed suit though.
Ciao,
You can mount them on a spare rim/wheel and slightly inflate them or you can just as well lay them on a large shelf, floor, in big cardboard box, whatever.
For as long as: the area is dry, there are no UV rays (not even from artificial lightsources), tubulars are in no way constrained (to avoid knicks in the sidewalls) and you're not going to keep them there for decades ( ), you'll be fine.
Is Veloflex the only tire that stamps a manufacture date on the base tape.
AFAIK they are the only one but maybe FMB or Dugast do so as well. It would be nice if more manufacturers followed suit though.
Ciao,
Being a snob is an expensive hobby.
- stella-azzurra
- Posts: 5066
- Joined: Mon Jan 23, 2006 6:35 am
- Location: New York
I need to get rid of the valve hump on my Vittoria tubular rally set. They are going on mavic reflex rims. What's a good way to make that hump less noticeable. How to trim around the valve.
No I will not modify the valve hole on the rim.
No I will not modify the valve hole on the rim.
I never took drugs to improve my performance at any time. I will be willing to stick my finger into a polygraph test if anyone with big media pull wants to take issue. If you buy a signed poster now it will not be tarnished later. --Graeme Obree
-
- Shop Owner
- Posts: 1980
- Joined: Sat Jun 13, 2009 4:02 am
- Location: NoVA/DC
Challenge grifos here with date stamps, glued yesterday.
Sent from my EVO using Tapatalk 2
Sent from my EVO using Tapatalk 2
Here is a peice on Francois Marie that I thought you guys might find interesting: http://www.bikeradar.com/gear/article/i ... hop-35668/
- stella-azzurra
- Posts: 5066
- Joined: Mon Jan 23, 2006 6:35 am
- Location: New York
CarlTroy wrote:sungod wrote:thanks chaps
now i just need to soothe my blistered thumb, had a struggle getting the tyre off - it was the first one i glued using the instructions here, seems the glue worked very well
Even thinner layers next time
That's what makes it stick so well. A thick layer of glue would not dry as well would easily come off.
Mavic makes some plastic tire levers to help you un-stick the tire from the rim.
These tire levers are not the same as the clincher ones.
I never took drugs to improve my performance at any time. I will be willing to stick my finger into a polygraph test if anyone with big media pull wants to take issue. If you buy a signed poster now it will not be tarnished later. --Graeme Obree
Hello everybody. I have read good things about veloflex tubular tyres and are now going to be my next tub purchase.
However, has anybody tried their clincher tyres? Looking for a clincher that has average puncture resistance (luckily rarely suffer from punctures), good in the wet and suitable for decending in the Pyrenees. I currently ride scwalble ultramo ZX without any problems.
Many thanks.
However, has anybody tried their clincher tyres? Looking for a clincher that has average puncture resistance (luckily rarely suffer from punctures), good in the wet and suitable for decending in the Pyrenees. I currently ride scwalble ultramo ZX without any problems.
Many thanks.
Hi,
Hmmmm....Interesting. You wouldn't have a pic or a link for these?
Technically they are the same as the tubular versions. If you're looking for decent puncture resistance make sure cto age the tyres for at least a couple of mionths prior to use.
Ciao,
Mavic makes some plastic tire levers to help you un-stick the tire from the rim.
Hmmmm....Interesting. You wouldn't have a pic or a link for these?
However, has anybody tried their clincher tyres?
Technically they are the same as the tubular versions. If you're looking for decent puncture resistance make sure cto age the tyres for at least a couple of mionths prior to use.
Ciao,
Being a snob is an expensive hobby.
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com