Schmolke TLO 30 Tubulars...in hand!

[Broid]

Here's the Fairwheel page with weights and whatnot...

http://blog.fairwheelbikes.com/2016/09/ ... rbon-rims/

[bm0p700f]

Nejmann,

My own branded rims and carbon ti hubs.

Those schmolke rims are very light. I wonder what the tension limmit is for these rims

[Broid]

Ok, second ride today, 40 miles, lots of steep climbs and fast descents. The steep climbs went up to 18%, and the wheels did not hold me back. My waistline did, but the wheels were great. The next big test was a steep, and twisty technical descent that ended with a 20% straight descent. Again, the braking on these wheels is impressive, and only a very little squeal on one hard brake going into a sharp turn after a high speed segment. Then the big high speed test. A long 20% down grade. Topped 50mph and the wheels were solid. They felt light, but no wobble at all, very impressed. Running Veloflex Carbons and dropped the psi to 100 on the back and 95 in the front and the ride was much better. So far I am really liking these wheels. 1040g for under $1900. Plus Tony at Fairwheel was just great to deal with. Highly recommended. I just might sell my Zipp 202's...

[elfuinha]

Ok, second ride today, 40 miles, lots of steep climbs and fast descents. The steep climbs went up to 18%, and the wheels did not hold me back. My waistline did, but the wheels were great. The next big test was a steep, and twisty technical descent that ended with a 20% straight descent. Again, the braking on these wheels is impressive, and only a very little squeal on one hard brake going into a sharp turn after a high speed segment. Then the big high speed test. A long 20% down grade. Topped 50mph and the wheels were solid. They felt light, but no wobble at all, very impressed. Running Veloflex Carbons and dropped the psi to 100 on the back and 95 in the front and the ride was much better. So far I am really liking these wheels. 1040g for under $1900. Plus Tony at Fairwheel was just great to deal with. Highly recommended. I just might sell my Zipp 202's...

Do you have better pictures of your wheels?????
expecially the rim.

Ordered last wheek:

TLO 45 Tubular - 24/28
Cx-ray
Wheels Manuf. Hubs - previous Alchemy ELF/ORC-UL

Let me know please.
Thanks

[Broid]

Ok, second ride today, 40 miles, lots of steep climbs and fast descents. The steep climbs went up to 18%, and the wheels did not hold me back. My waistline did, but the wheels were great. The next big test was a steep, and twisty technical descent that ended with a 20% straight descent. Again, the braking on these wheels is impressive, and only a very little squeal on one hard brake going into a sharp turn after a high speed segment. Then the big high speed test. A long 20% down grade. Topped 50mph and the wheels were solid. They felt light, but no wobble at all, very impressed. Running Veloflex Carbons and dropped the psi to 100 on the back and 95 in the front and the ride was much better. So far I am really liking these wheels. 1040g for under $1900. Plus Tony at Fairwheel was just great to deal with. Highly recommended. I just might sell my Zipp 202's...

Do you have better pictures of your wheels?????
expecially the rim.

Ordered last wheek:

TLO 45 Tubular - 24/28
Cx-ray
Wheels Manuf. Hubs - previous Alchemy ELF/ORC-UL

Let me know please.
Thanks

Just added three new images of these, follow the link. Hope these help. I think I might order the TLO 45 clinchers...


http://www.pbase.com/onlyamoment/moments

[elfuinha]

Many thanks...
Are they all 3k finish???
They look UD in the brake track

Enviado do meu C6903 através de Tapatalk

[Broid]

Don't know. The original images from Schmolke made them look glossy, but they clearly aren't...

[elfuinha]

Great... I asked for mine to matte finish!!!
According to schmolke, too doesn't have any clear coat...

Enviado do meu C6903 através de Tapatalk

[nonamed]

Great... I asked for mine to matte finish!!!
According to schmolke, too doesn't have any clear coat...

Enviado do meu C6903 através de Tapatalk

Have You already received the wheels? Whats weight?


Wysłane z iPhone za pomocą Tapatalk

[elfuinha]

Great... I asked for mine to matte finish!!!
According to schmolke, too doesn't have any clear coat...

Enviado do meu C6903 através de Tapatalk

Have You already received the wheels? Whats weight?


Wysłane z iPhone za pomocą Tapatalk

no it will take about 4 weeks more, because of the hubs, and i guess the holidays!!!

[island]

@elfuinha - hey, have you got your TLO 45 Tubular's yet? How are they?

[elfuinha]

Hello

Still 3 weeks away... beginning of next month.

Schmolke-carbon had a problem with production that delayed my rims.

They will be with Chris king R45 HUBS

Enviado do meu SM-G935F através de Tapatalk

[ChengHaoChang]

Hello

Still 3 weeks away... beginning of next month.

Schmolke-carbon had a problem with production that delayed my rims.

They will be with Chris king R45 HUBS

Enviado do meu SM-G935F através de Tapatalk

＠elfuinha , do you get it yet ? I have also ordered Schmolke TLO 45 Tubulars with Tune hub on last end of Nov., still waiting it.

[elfuinha]

Check the other post I did in Schmolke rims... in this thread.

No I didn't get them.
Best regards

Enviado do meu SM-G935F através de Tapatalk

[rainerhq]

＠elfuinha , do you get it yet ? I have also ordered Schmolke TLO 45 Tubulars with Tune hub on last end of Nov., still waiting it.

Of course you did