Lacing Mavic C40 CXR with hubs other than MAVIC?

Everything about building wheels, glueing tubs, etc.
Post Reply
Posts: 131
Joined: Mon Jan 30, 2012 8:57 am

by stang1

Just wondering if its possible to lace MAVIC C40 CXR rims to hubs other than Mavics? I just cant seem to get a fancy on them mavic hubs.

by Weenie

User avatar
Posts: 256
Joined: Tue Apr 26, 2011 8:09 pm
Location: London

by Maximilian

Unlikely. They're straight pull but the issue is the nipples which is proprietary. Different hubs required different length spokes. You wouldn't be able to use the mavic spokes as they're probably the wrong length. DT-Swiss or Sapim straight pull spokes may fit in the hub but probably won't play with the mavic nipples. To be honest there's nothing intrinsically wrong with the hubs, so you're probably best off just putting up with them.
Last edited by Maximilian on Sun May 11, 2014 4:54 pm, edited 1 time in total.

User avatar
Posts: 13
Joined: Thu May 21, 2009 6:32 am
Location: Cumming GA

by prowheelbuilder

Sure they can be re laced to any 16 /20 hole hub i.e. White Industries T11's or Chris King R45's. Yes the nipples are proprietary however they work with a standard 2.0 spoke thread and I can get them from Mavic. Cost is hubs, spokes, nipples (about $0.85 ea) and labor ($60.00 per wheel).
"If the frame is the heart of the bicycle, the wheels are its soul". Richard Craig

Posts: 113
Joined: Sun Jul 14, 2013 1:26 am

by cajer

Would you be willing to sell your mavic hubs.

Posts: 2262
Joined: Fri Aug 06, 2010 1:35 pm
Location: Geneva

by ultyguy

Anyone seen the C40 tubular rim in the flesh? What width is it? Almost impossible to find any info on that wheel.

Post Reply
  • Similar Topics
    Last post