Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About Impressum
It is currently Sun Sep 25, 2016 4:50 am
Recently the board software has been updated and there are some known bugs/failures:
- Avatars are currently not being displayed ✔ FIXED
- Tapatalk connection is currently broken ✔ FIXED
- Avatars cannot be uploaded ✔ FIXED

Please note that we will soon do some changes in WW board template design in case to get a fully mobile/desktop responsiveness board!
If you find more errors please post it here: http://weightweenies.starbike.com/forum/viewtopic.php?f=7&t=139062


All times are UTC+01:00




Post new topic  Reply to topic  [ 4 posts ] 
Author Message
PostPosted: Mon Mar 31, 2014 4:53 pm 
Offline

Joined: Mon Mar 31, 2014 4:49 pm
Posts: 2
Hi all,

Just a quick question as it has come round to bearing removal on my Bitex front hubs, where as I usually tap the axle through and replace the bearings that way on these wheels the end caps actually seem to be the axle ends so leave nothing to tap though.

So the question is how do I remove my old bearings from these wheels?

Thanks

James


Top
   
PostPosted: Mon Mar 31, 2014 9:57 pm 
Offline

Joined: Tue Nov 11, 2003 9:47 pm
Posts: 2196
Location: Santa Cruz, California, USA
If removing the end caps means there's no axle left, then you remove the bearings the same way you do it on their rear hubs (and motorcycle hubs).
Push the central bearing spacer to one side so you can get a drift on the inner race of a bearing and tap it. Move the spacer to the other side and tap that. If you move the bearing at all
the spacer will get loose and be easy to move around. Do it with the hub on a solid surface which will allow the bearing to come out. I often use a socket.


Top
   
Posted: Mon Mar 31, 2014 9:57 pm 


Top
   
 
PostPosted: Wed Apr 02, 2014 2:18 pm 
Offline

Joined: Mon Mar 31, 2014 4:49 pm
Posts: 2
Thanks for the reply.

I'm unable to see how to push the bearing spacer (is this the actual hollow axle that runs through the middle?) to one side. The inner race of the bearing is flush with the axle the whole way round so unable to 'tap' it out from hitting the inner race.


Top
   
PostPosted: Wed Apr 02, 2014 6:14 pm 
Offline

Joined: Tue Nov 11, 2003 9:47 pm
Posts: 2196
Location: Santa Cruz, California, USA
If you can see the bearing IDs (the bore) then the thing between them is a spacer. An axle by definition goes through the bearing ID bores. The spacer is a simple tube that is trapped between the bearing inner races. That's what's in the rear hub so I expect the front to be the same.

You don't push the spacer out to get to the bearings, you move it aside.
I use a screwdriver with a dull tip to push one end of the spacer to the side just enough to get my bearing-tapping-out tool on to the inner race. Then tap. Then move the spacer to the other side so you can tap that side. Usually with two taps the bearing has moved enough that the spacer is loose so I can easily move it from side to side as I tap the bearing out the rest of the way.

The spacer in the rear hub is a thin aluminium tube so be gentle with it.


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 4 posts ] 

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. Bitex Hub bearing removal

in Everything wheels

Beancouter

1

402

Mon May 16, 2016 8:30 am

Marin View the latest post

There are no new unread posts for this topic. Rotor Press fit 4624 ceramic (bearing removal tool)

in Road

wheelsONfire

2

214

Sat Apr 23, 2016 2:29 pm

wheelsONfire View the latest post

There are no new unread posts for this topic. zipp safety recalls - QRs and also front hubs

in Road

sungod

3

534

Fri Mar 18, 2016 4:38 pm

tinozee View the latest post

There are no new unread posts for this topic. Shimano double MTB Front Derailleur - real capacity (16T front tooth difference?)

in MTB

ooo

0

39

Sat Sep 24, 2016 6:52 pm

ooo View the latest post

There are no new unread posts for this topic. C60 bottom bracket removal

in Road

markyboy

4

303

Sat Jul 16, 2016 6:56 am

ianSWBB View the latest post


All times are UTC+01:00


Who is online

Users browsing this forum: doogie2304, elzilcho and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited