converting DA 7900-C24-CL to tubeless?

Everything about building wheels, glueing tubs, etc.
Post Reply
Posts: 167
Joined: Mon Aug 06, 2007 1:22 am

by theStig

I know they make a tubeless specific version - the C24-TL .. are there any problems converting the CL to tubeless?

What do you all recommend to get started? I'm thinking of picking up the Stans notubes kit and a set of Hutchinson tubeless tires. I'm not sure what width rim tape to get though..

If anyone has some experience on this I'd appreciate it if you chime in.

thanks in advance!

by Weenie

User avatar
Posts: 2693
Joined: Fri Feb 11, 2011 3:04 am
Location: Mississippi

by btompkins0112

I converted some Ksyriums with the Stan's kit....the 19mm tape worked, so that experience should be the same for the 7900s

Posts: 1384
Joined: Tue Sep 11, 2012 6:07 pm
Location: The Lone Star State

by FIJIGabe

Don't run Stan's sealant in the non-tubless versions. The ammonia in the sealant will eat away at the rim and ruin them. There's a thread here on the subject. Do a search and you'll see examples. You can try running Hutchinson ProtectAir or maybe Caffelatex, but DO NOT RUN STANS!!!
Madone 9
Madone 5

Madone 4, Cobia. I own a lot of Treks.

Post Reply
  • Similar Topics
    Last post