Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About Impressum
It is currently Sat Dec 10, 2016 6:20 pm
Recently the board software has been updated and there are some known bugs/failures:
- Avatars are currently not being displayed ✔ FIXED
- Tapatalk connection is currently broken ✔ FIXED
- Avatars cannot be uploaded ✔ FIXED

Please note that we will soon do some changes in WW board template design in case to get a fully mobile/desktop responsiveness board!
If you find more errors please post it here: http://weightweenies.starbike.com/forum/viewtopic.php?f=7&t=139062


All times are UTC+01:00




Post new topic  Reply to topic  [ 2 posts ] 
Author Message
PostPosted: Fri Dec 06, 2013 5:41 pm 
Offline

Joined: Wed Oct 30, 2013 12:52 am
Posts: 310
This may be a 2-3 post thread, but you never know. Really two topics. I'd like some opinions. This is for racing tubulars, light rider, but I would think the principles apply to clinchers and normal wheels.

Rim profile:
It is quite popular for wheel sets to come with a deeper section rear wheel than front.
Why?
As the front is the leading edge wouldn't you want as deep as you can handle? As the rear gets a whole bunch of wind churn, why bother with the extra weight?

Larger profile tires on the rear.
I read folks that mix a say 23mm and 25mm like to put the larger profile on the rear. This assumes for discussion the 25mm carries lower pressure.
I (in the distant past) always did the opposite. I thought the lower profile higher pressure rear transmitted the energy better and the softer front made handling and hands better.


Top
   
PostPosted: Fri Dec 06, 2013 6:12 pm 
Offline
in the industry
User avatar

Joined: Sun Jul 29, 2012 2:59 pm
Posts: 855
Location: Ruidoso, NM
A deeper rim is usually stiffer and stronger and heavier... which is good for a rear because the rear wheel carries more weight and all the torque, and has challenging dish. Deep rims are more effected by crosswinds which can be problematic on the front but not rear.

The bigger tire goes on the back because there is more weight there and aero matters less. All else being equal a larger tire has lower Crr.

But if you are a real weightweenie, you run light shallow rims and tires front and rear...

_________________
formerly rruff...


Top
   
Posted: Fri Dec 06, 2013 6:12 pm 


Top
   
 
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 2 posts ] 

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. Biggest rear hub to match dynahub front

in Cyclocross / Gravel / Touring

HillRPete

6

466

Fri Jun 03, 2016 8:04 am

john21wall View the latest post

There are no new unread posts for this topic. upcycling with titanium pivot bolts and turning rear caliper breaks into front.

in Road

Psyclebaz

0

145

Thu Aug 11, 2016 4:09 pm

Psyclebaz View the latest post

There are no new unread posts for this topic. Stuck in between - what would you do with post mount front, flat mount rear.

in Cyclocross / Gravel / Touring

Buddysnack

12

614

Wed Oct 26, 2016 11:17 am

Subira View the latest post

There are no new unread posts for this topic. Wider is better? 23mm tire on 21c rim vs. 25mm tire on 15c rim

in Road

Beaver

5

746

Fri Jul 01, 2016 9:46 pm

crimsonbadger View the latest post

There are no new unread posts for this topic. Experience with Profile Design 24 wheels

in Everything wheels

youngblud

3

392

Tue Feb 16, 2016 9:40 pm

youngblud View the latest post


All times are UTC+01:00


Who is online

Users browsing this forum: allenpg, MoPho and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited