HOT: Active* forum members generally gain 5% discount at starbike.com store!
Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Articles FAQ Contact About




Post new topic Reply to topic  [ 4 posts ] 
Author Message
PostPosted: Thu Jul 11, 2013 6:39 pm 
Offline

Joined: Thu Jul 11, 2013 6:27 pm
Posts: 3
I have a 16 hole rim and 32 hole hub for a wheel build that is driving me bananas. I thought that it would be simple matter of just skipping every other hole in the hub.

Whilst one side of the wheel builds ok, the other side doesn’t whether I use every other hole, pair the holes and skip two or whether I swap heads in or out. Whichever I use, half the spokes on the “second” side are too long, half are too short and the triangle formed by the one cross is not symmetrical.

I’m guessing it’s because the offset of the holes between flanges is different between a 16 hole hub and a 32.

Has anyone tried this before? Is it possibe to lace satisfactorily if I try new spoke lengths (for the third time).

Does anyone have any ideas how to adjust the standard spoke length formula for this. If not I’m guessing that the standard calculator is good for one side but for the other I’ll need to adjust that length up to 4mm plus and minus.

Many thanks


Top
 Profile  
 
PostPosted: Fri Jul 12, 2013 12:59 am 
Offline

Joined: Tue Sep 14, 2010 3:28 pm
Posts: 1405
It should work. Any photos, or more information as to the hub, and rim being used?


Top
 Profile  
 
Posted: Fri Jul 12, 2013 12:59 am 


Top
  
 
PostPosted: Thu Jul 18, 2013 3:43 pm 
Offline
in the industry

Joined: Sat May 12, 2012 7:25 pm
Posts: 1613
Location: Glermsford, Suffolk U.K
Do you have paired drilled rim as that would cause an issue. You have made some sort of error as it should work.

_________________
www.thecycleclinic.co.uk


Top
 Profile  
 
PostPosted: Fri Jul 26, 2013 10:01 pm 
Offline

Joined: Wed Feb 03, 2010 1:31 am
Posts: 329
Not sure its much help or not. But I have a Campagnolo Shamal 12 spoke front rim laced to a Veloce 36 spoke hub. Radial lacing. Can't recall how I determined spoke length. Measured the old factory spokes or just guessed with different lengths.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 


Who is online

Users browsing this forum: Yahoo [Bot] and 6 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. DIY drain hole in CAAD10?

in Road

hmai18

6

1078

Sun Apr 13, 2014 2:09 pm

ToffieBoi View the latest post

There are no new unread posts for this topic. Pacenti SL23 hole offset

in Everything wheels

lennyk

9

876

Wed Jul 09, 2014 4:59 am

Rush View the latest post

There are no new unread posts for this topic. 24 hole Campy compatible rear hub

in Wanted

spookyload

0

32

Sun Nov 09, 2014 11:11 pm

spookyload View the latest post

There are no new unread posts for this topic. chip in carbon fork brake hole

in Road

wynnbb

1

338

Mon May 12, 2014 3:38 pm

eric View the latest post


It is currently Fri Dec 26, 2014 8:21 am

All times are UTC + 1 hour




Advertising   –  FAQ   –  Contact   –  Convert   –  About

© Weight Weenies 2000-2013
hosted by starbike.com


How to get rid of these ads? Just register!


Powered by phpBB