Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About Impressum
It is currently Sun Sep 25, 2016 11:45 am
Recently the board software has been updated and there are some known bugs/failures:
- Avatars are currently not being displayed ✔ FIXED
- Tapatalk connection is currently broken ✔ FIXED
- Avatars cannot be uploaded ✔ FIXED

Please note that we will soon do some changes in WW board template design in case to get a fully mobile/desktop responsiveness board!
If you find more errors please post it here: http://weightweenies.starbike.com/forum/viewtopic.php?f=7&t=139062


All times are UTC+01:00




Post new topic  Reply to topic  [ 34 posts ]  Go to page Previous 1 2 3 Next
Author Message
PostPosted: Tue Apr 09, 2013 5:18 pm 
Offline
Shop Owner
User avatar

Joined: Tue Mar 10, 2009 5:27 am
Posts: 1244
Location: McCall, ID
I'm not too sure about a 5.6 setup. The 3.4 and 6.7 already cover the ground that the 5.6 would be trying to fill.

I'd argue that the 3.4 is the most versatile rimset on the market.

_________________
http://www.zencyclery.com


Last edited by Zen Cyclery on Tue Apr 09, 2013 5:42 pm, edited 1 time in total.

Top
   
Posted: Tue Apr 09, 2013 5:18 pm 


Top
   
 
PostPosted: Tue Apr 09, 2013 5:36 pm 
Offline
User avatar

Joined: Mon Dec 21, 2009 6:00 am
Posts: 457
Location: Bay Area, CA
Enve 6.7 is only 2mm deeper in the front than the 404, and 12mm in the rear, so not really huge. Like Zen says, the 3.4 is probably the better all around wheel, but the deeper wheels aren't a bad choice either.

dcl10 wrote:
The Enve's are stiffer, more stable in crosswinds, and their warranty service is excellent. Never any warranty hassles with wholesale orders, and they always seem to give the customer the benefit of the doubt, vs Zipp, who from my experience just assumes its your fault and makes you prove otherwise.


I thought we had determined that to be a "make the marketing fit the data" point by Enve. Their overall steering torque is higher than Zipp, but it's more linear beyond some unspecified yaw angle (because who needs to label the x-axis). I have a big issue with how dishonest they present their data given than they just plugged "303 Firecrest" into the data after it came out rather than actually testing it (the previous 303 was tested, not a Firecrest, as they claim).

I think a lot of the braying about this or that with Zipp is completely overblown , but I'd still go with Enve just for being able to choose my own hub, especially given the small cost difference (Enves also seem to retain their value better).

e: also, how have people not learned to use the wheel sub forum yet?


Top
   
PostPosted: Tue Apr 09, 2013 5:50 pm 
Offline

Joined: Thu Nov 04, 2010 3:29 am
Posts: 75
Location: Boulder, CO
I agree with drmutley, make a 5.6 and I would buy them. I have ridden both the 3.4 and the 6.7 and I just felt for a guy like me, with only one set of race wheels, who does a wide variety of races, each one was a compromise. I liked the 3.4 a lot, but would like a more aero wheel. The 6.7 would probabbly be my choice if I had to chose, but in the swirling winds we get decending in CO they scared me. I think a 5.6 would be a great all around, one set of race wheels.

I did find that the braking on the ENVE to be much better (stronger, more consistent, less noise) than the Zipp's.


Last edited by bigcalves on Tue Apr 09, 2013 5:56 pm, edited 1 time in total.

Top
   
PostPosted: Tue Apr 09, 2013 5:53 pm 
Offline
Shop Owner
User avatar

Joined: Tue Mar 10, 2009 5:27 am
Posts: 1244
Location: McCall, ID
Why not mix and match What about a 3.7? That would ensure consistent handling even in the strongest of crosswinds, while your rear wheel would remain quite aero.

_________________
http://www.zencyclery.com


Top
   
PostPosted: Tue Apr 09, 2013 7:20 pm 
Offline

Joined: Mon Nov 05, 2012 3:40 pm
Posts: 17
5.6 would be nice!


Top
   
PostPosted: Tue Apr 09, 2013 7:22 pm 
Offline

Joined: Fri May 25, 2012 6:02 pm
Posts: 95
jcumpstay wrote:
I haven't ridden the 303's but I do own a set of 404's and also a set of Enve 3.4's on Alchemy Hubs. I have actually given my 404's to a mate to ride at the moment and part of the reason for doing so was to see if he thought they were as flexy and noodle like as i do. Waiting on his longer term review but when he came back to me after a few days saying that he couldn't get over how much the wheels rubbed the brake pads when putting the power down, I knew that my suspicions were correct. The other comment he made was that he was not going to use them in crit races because he was sure the rest of the bunch would hear the brake rub before he had a chance to try for a break away.
In summary we both dislike the 404's due to their flex issues. In regards to the Enve 3.4's, well they are just better on all fronts. A lot stiffer, seem just as aero as the 404's but don't catch the cross winds as much and with Alchemy hubs they are silky smooth yet durable.

Just my two cents worth, but I won't be buying Zipp again anytime soon.


Agree with this. PLEASE rethink your choice of DT240S hubs for those Enve rims. I have 6.7s on the DTs and 3.4s on the Alchemy hubs and the Alchemy hubs just build in to a stiffer, more responsive wheel. Both wheels were built by Wheelbuilder and they have confirmed my assessment.

_________________
EVO Hi-Mod | 9070 di2 | Pioneer PM | Aeolus 3s/5s
SuperX Hi-Mod Disc | Sram Red | Pioneer PM
P5 | 9070 di2 | Pioneer PM | Zipp 808/Super 9 Disc
T1 | Scatto | Rolf Prima FX58/Zipp Super 9 Disc


Top
   
PostPosted: Tue Apr 09, 2013 8:14 pm 
Offline

Joined: Mon Jan 24, 2011 8:09 pm
Posts: 918
Wait, so everyone is of the opinion OP should drop $1800-2000 for the Rims, and then jam another $700 in hubs, then spokes/nipples, plus the $200 custom build labor get himself a $3000 set of wheels....when you can get a set of Zipp FC tubulars beyond black with 188 hubs/cxrays for $1700-1800 new?

Ok...not my opinion obviously. Are you going to get a better hub and *maybe* better rim....hub yes, rim, not so much IMO....so you put $1200+ more into the Enve 3.4 to get what exactly? You won't gain anything performance wise from that move going with the Enve, except to say you have Enve with xxx special hubs.

Which, if I'm building wheels, I'm going with Alchemy hubs and CXRays personally...so I'm on board with that...but the rest, no so much.

If you want DT240 hubs, just go get yourself some Bontrager D3/D5 Aeolus wheels. I think if pros that are bashing the Sh&t out of these things in Paris Roubaix and winning the races (Cancellera-Bont D5 Aeolus/Boonen-303 FC tubies)...why bother with anything else...haha...


Top
   
PostPosted: Wed Apr 10, 2013 3:03 am 
Offline

Joined: Wed Feb 04, 2009 5:37 am
Posts: 194
Yeah but no. RRP for Zipps is about $2700. So you must be comparing a street price of Zipps to a RRP for the ENVE build.

And I think DT240s are underrated. Yes they are a bit boring and may provide a slightly less stiff wheel but IME they have many advantages including ease of service and they only take a sec to swap 10 to 11 speed. I also like the star ratchet more than pawl systems.


Top
   
PostPosted: Wed Apr 10, 2013 3:30 am 
Offline

Joined: Thu Feb 28, 2013 4:25 am
Posts: 62
drmutley wrote:
5.6 next? ;-)


Never mind. I thought you were serious


Top
   
PostPosted: Wed Apr 10, 2013 4:18 am 
Offline

Joined: Fri Feb 11, 2011 4:23 am
Posts: 344
stanseven wrote:
drmutley wrote:
5.6 next? ;-)


Never mind. I thought you were serious


Not really, as for an 84kg fatboy like me, 6.7s are ok :-)


Top
   
PostPosted: Fri Apr 12, 2013 11:55 pm 
Offline

Joined: Mon Mar 12, 2012 4:02 am
Posts: 40
Zigmeister wrote:
Wait, so everyone is of the opinion OP should drop $1800-2000 for the Rims, and then jam another $700 in hubs, then spokes/nipples, plus the $200 custom build labor get himself a $3000 set of wheels....when you can get a set of Zipp FC tubulars beyond black with 188 hubs/cxrays for $1700-1800 new?


Similar issue here in Australia. Zipp 404 FC's about $2,400 from any number of shops. Enve 3.4's about $3,500. As much as I want the Enve's that extra $1,100 gets me a Power2max power meter thrown in as well.


Top
   
PostPosted: Wed Apr 17, 2013 3:09 pm 
Offline
User avatar

Joined: Tue Aug 17, 2010 4:20 pm
Posts: 274
Location: Pittsburgh, PA
Ok, I am pulling the trigger this week and getting the Enve 3.4's with the Alchemy hubs, Money is not the issue. I am probably just doing this for the bling factor as I do not race, I am just a guy who likes to ride his bike and I am running out of ideas for my birthday gifts (bike related). I have always lusted after a set of carbon wheels and financially can afford them. My question is what type of ride characteristics will I see? Is it something that will be noticeable over my current custom wheels (Kinlin with R45's). I have read several articles and forum reviews and it seems to be a mixed bag of reviews. Appreciate any new reviews as it looks like carbon is improving with every new model of rim that is released. Appreciate some input from someones own experiences.


Top
   
PostPosted: Wed Apr 17, 2013 5:31 pm 
Offline
Shop Owner
User avatar

Joined: Tue Mar 10, 2009 5:27 am
Posts: 1244
Location: McCall, ID
@G6612- The ride quality of the 3.4s will be noticeably better than the Kinlins. They will be a bit more predictable than the alloy hoops, and they will be much more rigid from a lateral aspect.

_________________
http://www.zencyclery.com


Top
   
PostPosted: Fri Apr 19, 2013 4:50 am 
Offline

Joined: Sun Apr 24, 2011 2:21 am
Posts: 347
What tires would you guys run on the 3.4? The front being 26mm wide makes many of my old tire standards not ideal.


Top
   
Posted: Fri Apr 19, 2013 4:50 am 


Top
   
 
PostPosted: Fri Apr 19, 2013 8:23 pm 
Offline
Shop Owner
User avatar

Joined: Tue Mar 10, 2009 5:27 am
Posts: 1244
Location: McCall, ID
@Ghost234-Enve recommends that you run a 22 or 23c tire on the 3.4

_________________
http://www.zencyclery.com


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 34 posts ]  Go to page Previous 1 2 3 Next

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. Stiffest 50mm-60mm carbon clinchers? Bora? Zipp 404? Mavic? Enve?

[ Go to page: 1 2 ]

in Everything wheels

RedRacer

21

2032

Thu Jul 14, 2016 5:23 pm

Henryexige View the latest post

There are no new unread posts for this topic. new wheels ENVE 4.5 enve hub vs LW Meilenstein T Schwarz

[ Go to page: 1 2 ]

in Everything wheels

quattro100

15

1418

Mon Apr 25, 2016 5:44 am

quattro100 View the latest post

There are no new unread posts for this topic. Enve 4.5 vs Zipp 404 Showstopper Rim

in Road

pamountainbiker

7

2169

Wed Feb 24, 2016 2:58 pm

jwp75 View the latest post

There are no new unread posts for this topic. Zipp 404 NSW vs Enve 4.5 on crosswinds

[ Go to page: 1 2 ]

in Road

omerhorovitz

22

2863

Mon Jun 06, 2016 7:43 am

omerhorovitz View the latest post

There are no new unread posts for this topic. Rim weight of Zipp, ENVE, Shimano, campy, and etc...

in Everything wheels

Skunkworks

3

739

Mon Jan 25, 2016 5:01 am

chiumomo View the latest post


All times are UTC+01:00


Who is online

Users browsing this forum: Baidu [Spider] and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited