@zen
when I said bladed I meant the flatter one or the other one the DB -double butted which comes either as 2-1.5-2 or 1.8-1.5-1.8

I'd go for 24/28.

If you are going to use DB spokes then go 2-1.5-2 on the front and 2-1.8-2 on the rear.

But preferably the 2.-0.9-2.3-2 front and rear or not? And yes eventually I have decided to go for the 24/28 since most of the responds were to go this way. What will be the recommendation for the lacing pattern??

From http://www.superlight-bikeparts.com" onclick="window.open(this.href);return false;" onclick="window.open(this.href);return false;

recommendation for
rider weight Tune/Alpha 340

- 20/24 spokes to 75 KG
- 24/28 spokes to 85 KG
- 28/32 spokes to 90 KG

I am 72-74 kg and took 24/28.

PSM
how do you like this combination?

Actually, I haven't ridden them yet. Snow here in Stockholm since I bought them. But I am going to Majorca for a week on Saturday. Keed my fingers crossed!

Bought them for climbings...

PSM
What weight they came about and what lace pattern you made front and rear?

1265 gr. One revolution rim tape. No Decals.

PSM
Have safe and great ride in Majorca, post some pictures from there!

I'll post a "RR" when back.

I'm having Zen build me this wheelset 20 radial front, 28 2x rear. Sapim CXRays. I'm 72 kg, club rider, hill rider, occasional racer. The config was partially on Zen's recommendation and partially on a local builder who laced quite a number of 340 rims, but moved away from the area before he could build mine. Plus he favored DT240s which are great hubs, but a bit overpriced, IMHO. Two or three of the wheelsets this guy built have been through the Battenkill (all running tubeless I believe) with no problem. I understand the 2nd gen 340, if built correctly, can be quite durable. Battenkill certainly is a legit proving ground as far as that goes.

Anyway, wheels should be here in a few weeks, I can give a run down then. They're going on a '13 Tarmac.

i can tell for Kinlin rims 220 - wich are almost same weight - 370-390g and maby stiffnes also

24 front ;28 rear for 70-80kg rider.
24 rear is just for really light riders
and why not use round spokes 1,5mm front & NDS ; 1,8mm on DS? they are not aero wheels so there is no need for aero spokes.

_________________
http://kavitec.blogspot.com/

click this! http://www.youtube.com/watch?v=jqfFdCWAH5I&list=UUEtgd6K9EDGmoSE2YYipQgQ&index=20

The 340 rims aren't terrible for aero, and aero spokes will reduce the drag on any wheelset.

Also the XR200 is noticeably less stiff than the 340.

_________________
formerly rruff...

I built a similar set for a 175 lbs friend (24f/28r), but with the older Alpha 340 rim (lighter). The set came at around 1210g.

The rear wheel started creaking after 1000 km. We thought it was coming from the Mag 170 hub, but after lots of research, and help from Madcow, it came down to the tension decreasing on the Stan's rim. I re-tensioned the wheel last week. He didn't ride the wheel yet.
I don't know how stronger the new Alpha 340 rim is, but I'd recommend going a little stronger on the rear wheel for a 170 lbs rider.

Louis

_________________
http://www.ccsalma.com