30mm train/race alu rear wheel on a budget?

Everything about building wheels, glueing tubs, etc.
Post Reply
davidalone
Posts: 589
Joined: Fri Feb 10, 2012 4:27 pm

by davidalone

hi guys.

I need to rebuild a rear wheel (after mine got car-tacoed). this wheelset was my do-anything (train, climb, crit race) go to wheelset when I don't want to use my HEDs.. the surviving front wheel is a kinlin XR300 laced radially to a novatech hub.
I'd personally like to keep the rear consistent with the front (also 30mm deep), and hopefully for a low price ( I'm a student.)
weight is not such a big issue, as long as I can keep it at around 900++ odd grams (no skewers or rim tape). main consideration is it would need to be a laterally stiff wheel for crit racing and some climbing. I'm 66kg, 1.79m, so I'm not porky by any standards, nor am I the most powerful of riders ( designated domestique for my team.)

I can get some pro-lite 30mm deep rims and hub for really cheap... would this be a good idea?

by Weenie


istigatrice
Posts: 756
Joined: Sat May 12, 2012 8:32 am
Location: Adelaide, Australia

by istigatrice

Why not go with the XR-300 again? IIRC they're less than $40 a rim
I write the weightweenies blog, hope you like it :)

My SwiftCarbon Ultravox

My Velocite Selene

Disclosure: I'm sponsored by Velocite, but I do give my honest opinion about them (I'm endorsed to race their bikes, not say nice things about them)

User avatar
Zen Cyclery
Shop Owner
Posts: 1244
Joined: Tue Mar 10, 2009 5:27 am
Location: McCall, ID
Contact:

by Zen Cyclery

Agreed..

I think that you should stick with the XR300. That is a solid hoop and for the price it is decent quality.

jmsp
Posts: 43
Joined: Wed Mar 11, 2009 5:45 pm

by jmsp

Fulcrum's Racing 4 have a 30mm rim and are (very) cheap. Don't know if it helped.

Post Reply
  • Similar Topics
    Replies
    Views
    Last post