Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About Impressum
It is currently Fri Oct 28, 2016 3:45 pm
Recently the board software has been updated and there are some known bugs/failures:
- Avatars are currently not being displayed ✔ FIXED
- Tapatalk connection is currently broken ✔ FIXED
- Avatars cannot be uploaded ✔ FIXED

Please note that we will soon do some changes in WW board template design in case to get a fully mobile/desktop responsiveness board!
If you find more errors please post it here: http://weightweenies.starbike.com/forum/viewtopic.php?f=7&t=139062

All times are UTC+01:00

Post new topic  Reply to topic  [ 26 posts ]  Go to page 1 2 Next
Author Message
PostPosted: Tue Oct 30, 2012 9:20 pm 

Joined: Fri Nov 18, 2011 5:19 am
Posts: 903
Following the lead of predrefeu (who's name I read incorrectly every time, thanks)

Weight: 1415g (including stans tubeless tape installed)
Rims: "lightweight" from FarSports
Spokes: Sapim CX-Ray
Hubs: Bitex hubs, yapanese EZO bearings
Drilling: 20h front, 24h rear
Finish: matte 3k finish

Rider Weight at time of review: ~174lbs
Tires: Continental GP4000s "Black Chili", 23mm
Tubes: Continental standard tubes with no name valve extenders
Brakes: SRAM Force
Pads: Blue pads supplied by Farsports
Skewers: 44g KCNC Ti
PSI: Typically 100psi front and rear.

Review terms: ~10-12 weeks of all around use including racing

Build Quality
The wheels are about the quality you'd expect for $650-700 for a new product. Finish quality was good and the wheels looked great on the bike and got a fair bit of attention despite being matte finish. Mine saw some unfortunately sized bumps and potholes on fast descents that rotated my bars down in the stem - but no noticeable deflection in the rim and absolutely no damage (verified by LBS). I even flatted the rear on a moderate descent (~35mph) and didn't die! The wheels were plenty stiff for my pedal mashing self - no brake rub like I noticed when climbing on my ROL D'Huez wheels.

The hubs are OK. I opted for the Bitex hubs due to price and stateside availability (from bikehubstore.com) and while they're not the most buttery feeling hubs I've ridden - I never felt like I was riding underwater.

These were also my first carbon wheel experience and my first experience with a deeper wheel. Most of my braking was gradual and on flat ground as I'm not much of a fan of braking while going downhill (everyone has to be fast somewhere - uphill sure aint it for me!) and can't think of 5 panic braking situations I experienced while on these wheels. For the most part, braking felt very similar to the braking I experienced on my stock swissstop black pads and aluminum braking surface. The exception was definitely in those panic braking situations where I wasn't able to modulate the brakes as well and I definitely noticed brake fade. For comparison, I'm now on HED Stinger 6 wheels and Swissstop yellow pads and the braking feels every bit as good, if not better, than my HED Belgiums with Swissstop black pads.
Towards the end of my use on this setup I'd started getting some squealing as well. And the supplied blue pads wore very fast.

Braking in the WetI never rode in terribly wet conditions on these wheels.

Aero Qualities & Sidewinds
With my weight and build I'm not really one to get bullied by sidewinds. There were a few training rides I was on where my line was a little disturbed by truck traffic (go figure) and one race where I got pushed from one lane to another on a fast descent - that wasn't fun as it was followed then by a very sharp turn bordered by barbed wire fencing. I did notice these wheels in crosswinds more than my standard depth wheels (24-27mm) but it was never a concern for me.
As for aero qualities and perceived speed; I was disappointed to never really feel like these wheels offered my anything in the performance department. That's ultimately why I sold them. They were cool... and they looked cool... they spun up pretty quickly but felt no faster than my aluminum wheels and didn't hold speed well enough to consider it an advantage.

Cornering and Ride Quality
Stiff. I was happy to never have an issue where lateral stiffness was a concern. The wheels didn't ride particularly plush nor overly harsh but they also never gave me a reason to worry about their durability - they just felt solid underneath me - which is why I didn't hesitate to train on them regularly.

The wheels came with a pair of titanium skewers and blue pads - I never used the skewers and the pads wore out like tissue paper.

Other Statements
My overall impression of these wheels was that they were quite ordinary and nothing about them really left me saying "wow." They're nearly the same weight as my Belgium rims laced to the same hubs using Sapim double butted spokes and the latter are more comfortable with an even lower price tag. They don't feel as fast nor brake as well as my HED Stingers but they did feel a touch faster to spin up - where my Stingers have a little more noticeable baggage on spin up... which I'll happily accept for how well they hold speed.

And there you have it :)
(I'll add more if anything comes to me - I'm rushing through my lunch break at the moment)

Posted: Tue Oct 30, 2012 9:20 pm 

PostPosted: Tue Oct 30, 2012 10:25 pm 

Joined: Fri Oct 07, 2011 2:08 pm
Posts: 1365
:thumbup: . It seems from your review and predrefeus review that theres not that much of an aero advantage going to the 50mm . Nice writing :beerchug:

PostPosted: Wed Oct 31, 2012 4:02 am 

Joined: Thu Mar 08, 2012 3:20 pm
Posts: 153
Imaking20 wrote:
Following the lead of predrefeu (who's name I read incorrectly every time, thanks)

Haha you still have it wrong. Look at it as two words (if you know any french); prendre, & feu. Direct translation would be 'take fire'.

These reviews need pictures. And, of course, follow ups.

PostPosted: Wed Oct 31, 2012 4:07 am 

Joined: Wed Feb 09, 2005 4:51 am
Posts: 1868
The biggest issues many people face when switching to lighter wheels is that they don't switch their styles of riding.

Most ride heavier wheels with a certain tempo in their pedaling style. It fluctuates during the pedal cycle between power and relaxed follow through. It works well on 'heavier' wheels as the angular momentum of these wheels will carry the motion through.

On lighter wheels, it requires a different pedaling style. One that's smooth and continuous through the cycle/stroke. Reason being that lighter wheels lose momentum as fast as they gain momentum and you can't rely on them like a flywheel in smoothing out the pedaling strokes.

Its something which many people complain but never really think about when they swap to lighter wheels and lighter bikes.

PostPosted: Wed Oct 31, 2012 6:21 am 

Joined: Fri Oct 16, 2009 1:25 am
Posts: 575
Location: Gold Coast Australia
50mm rims defineatly do provide an aero advantage over for example 24mm alu of othewise identical build... just not these ones... (cos they are not designed to be aero with the 23mm tyre run on them (or any other idth arguably))...

Suggest the Bontrager 5 D3 wheels to make the point.... dead on 50mm and they in (tubular at least) spin up well and hold speed well....

Other than that a good write up, thanks...

PostPosted: Wed Oct 31, 2012 3:13 pm 

Joined: Wed Feb 09, 2011 3:03 am
Posts: 194
Contemplating getting the 50mm Tubulars from Far Sports.........would you suggest Far Sports to others?

PostPosted: Wed Oct 31, 2012 4:09 pm 

Joined: Fri Nov 18, 2011 5:19 am
Posts: 903
Maxxevv: I don't really think that's a point of concern in my case as the weight of these wheels was within 30 grams of 2 other wheel sets I had.

Shadwell: I didn't say 50mm wheels don't offer an Aero advantage. I said I didn't feel anything with these and this was simply to be a review - not a comparison of 50mm wheels out there. For the record, however, the Bontrager wheels you mentioned are at the sharp end of my list if I were to purchase a brand new setup.

Wolfesquire: I wouldn't go out of my way to recommend people nor turn them away. I'd first encourage people to hunt Craigslist as great deals can usually be had secondhand. I picked up my HED stingers with vittoria tires glued and a sram cassette for $1050 shipped and I would whole heartedly say at pricepoints that close the HED is the way to go.

PostPosted: Tue Nov 20, 2012 4:44 pm 
User avatar

Joined: Fri Sep 21, 2012 3:58 am
Posts: 94
Location: Southern California
Which VeloPlugs (yellow or red) do you guys use with Far Sports FSC50-CM?

PostPosted: Tue Nov 20, 2012 5:08 pm 

Joined: Tue Mar 08, 2011 6:29 pm
Posts: 5
Has anyone tried converting these 50mm wheels to tubeless? Any success?

PostPosted: Tue Nov 20, 2012 7:53 pm 

Joined: Fri Nov 18, 2011 5:19 am
Posts: 903
I've heard neither Veloplug works well with the Farsport rims. I used stans tape - nearly the same weight (I think I had 6-10 grams for both wheels), cheaper, and readily accessible.

I wouldn't run these tubeless.

PostPosted: Tue Nov 20, 2012 8:00 pm 

Joined: Tue Nov 11, 2003 9:47 pm
Posts: 2196
Location: Santa Cruz, California, USA
I used red Veloplugs in mine. They needed to be pressed in with a tool. I used a 1/4" drive handle.
At least this way they're not going to fall out while changing a tube by the side of the road.
If I was to do it again I'd use Rox tape.

PostPosted: Sun Mar 24, 2013 6:23 am 
User avatar

Joined: Sun Jun 12, 2005 10:56 am
Posts: 2673
Location: New Zealand
I used red veloplugz.....pushed about half in by hand and about half I needed to push them in with the bar of my T-bar spoke key.

Updated: Racing again! Thought this was unlikely! Eventually, I may even have a decent race!
Edit: 2015: darn near won the best South Island series (got second in age
-group)..woo hoo Racy Theremery is back!!

PostPosted: Sun Mar 24, 2013 6:45 am 

Joined: Sun Feb 10, 2013 5:11 pm
Posts: 84
Great review and other good feedback. The only thing we are missing is some pics.

PostPosted: Thu Apr 25, 2013 11:13 pm 
User avatar

Joined: Fri Sep 21, 2012 3:58 am
Posts: 94
Location: Southern California
I am in the middle of my 1st warranty experience with Farsports. I have a wheel with a rear Ceramic EdHub that from the moment it 1st arrived at my door has not been right. I should've complained about it when I 1st received it, but I was anxious to ride it (I had to wait about a month from the time they received payment until I received it) and get started with my season. From the beginning the hub didn't spin smoothly, there was a pinging sound when I would pedal (I thought it could be the spokes originally, but later on realized it was bad ceramic bearings), and the free hub was LOUD. Being how this was my 1st road wheel from Farsport I thought this kind of low quality must be normal. After about a month I noticed there was considerable play in the axle. I took it to my LBS. The mechanic tried tightening the allen heads on the ends of the axle, but the play remained. He opened the hub, and showed me the hub, axle, and ceramics were bad. I hadn't even ridden 300 miles on this thing yet. Kyle had me fill out a form and send him some photos. Last night he sent me an e-mail saying "Mae" would be in touch regarding the issue. I have 5 other wheels I've bought from Farsports in the past 6 months (2 track wheels w/Novatec hubs and 3 road wheels w/Ceramic EdHubs). I haven't had any issues with them so hopefully they replace this wheel quickly and without too much hassle so I can continue to order wheels and recommend wheels from them. I will definitely keep you all updated as to my experience with this warranty issue.

Posted: Thu Apr 25, 2013 11:13 pm 

PostPosted: Tue May 07, 2013 2:36 am 
User avatar

Joined: Fri Sep 21, 2012 3:58 am
Posts: 94
Location: Southern California
Warranty Claim Update - I received an e-mail from Kyle this morning saying he shipped a new rear hub out to replace my defective hub.

Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 26 posts ]  Go to page 1 2 Next

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. Which 50mm carbon clinchers for a puncheur?

in Everything wheels




Sat Apr 30, 2016 1:02 pm

bm0p700f View the latest post

There are no new unread posts for this topic. Attachment(s) Fulcrum Racing Speed Carbon Tubular 50mm Road Wheelset (New)

in For sale - Pictures are mandatory 22-3-13




Thu Sep 08, 2016 2:27 pm

Westbank View the latest post

There are no new unread posts for this topic. Stiffest 50mm-60mm carbon clinchers? Bora? Zipp 404? Mavic? Enve?

[ Go to page: 1 2 ]

in Everything wheels




Thu Jul 14, 2016 5:23 pm

Henryexige View the latest post

There are no new unread posts for this topic. Carbon thread

[ Go to page: 1 2 3 4 ]

in Road




Tue Sep 06, 2016 11:34 am

TheDarkInstall View the latest post

There are no new unread posts for this topic. Farsports rims ERD?

in Everything wheels




Thu Dec 03, 2015 2:01 pm

Bluechip View the latest post

All times are UTC+01:00

Who is online

Users browsing this forum: No registered users and 1 guest

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited