Weight Weenies
http://weightweenies.starbike.com/forum/

Open mold wide profile carbon wheels
http://weightweenies.starbike.com/forum/viewtopic.php?f=113&t=103936
Page 71 of 103

Author:  YmOeU [ Thu Jul 24, 2014 1:26 pm ]
Post subject:  Re: Open mold wide profile carbon wheels

Where did you get that 28mm wide rim?

Author:  Thuekr [ Fri Jul 25, 2014 12:18 am ]
Post subject:  Re: Open mold wide profile carbon wheels

Look a couple of pages back.

Author:  Weenie [ Fri Jul 25, 2014 12:18 am ]
Post subject:  Re: Open mold wide profile carbon wheels


Author:  YmOeU [ Fri Jul 25, 2014 5:11 pm ]
Post subject:  Re: Open mold wide profile carbon wheels

LoL thanks thuekr I should have looked at that first huh LoL

Author:  tharmor [ Fri Jul 25, 2014 5:58 pm ]
Post subject:  Re: Open mold wide profile carbon wheels

I'm anxiously awaiting your ride report @thuekr

Please flood this thread with pictures too. If you need someone to post the pictures for you, I will be more than happy to do it myself, just let me know.

Author:  Thuekr [ Fri Jul 25, 2014 9:52 pm ]
Post subject:  Re: Open mold wide profile carbon wheels

My build is for a track bike - so my experiences are somewhat limited regarding a roadie-build. Anyway - I will share my experiences. BTW found another picture of the rim I haven't seen before.
Image

Author:  rijndael [ Fri Jul 25, 2014 9:55 pm ]
Post subject:  Re: Open mold wide profile carbon wheels

That's the Yishun rim, the metal bit at the clincher bead is the giveaway.

Author:  Thuekr [ Fri Jul 25, 2014 10:00 pm ]
Post subject:  Re: Open mold wide profile carbon wheels

Yup should be the WU6C I've ordered and is on it's way.

Author:  seanblurr [ Fri Jul 25, 2014 11:01 pm ]
Post subject:  Re: Open mold wide profile carbon wheels

Any first hand experience with the VeloBuild 40 or 50mm, 25mm wide wheels?

Author:  jamesaus [ Wed Jul 30, 2014 7:51 am ]
Post subject:  Re: Open mold wide profile carbon wheels

Done a fair bit of reading and it's all got a bit daunting. So I'll stick a question out there and see how I go...

Looking to put together a shallow depth carbon-clincher-rim with disc-hub wheelset. Sticking them on my cross bike for wet-weathr-commuting and wet-weather-road-training duties.

Who should I be speaking to... hongfu, light bicycle or someone else?

Weight is not so much the concern as best build quality. They are replacing a wheelset that would have to be over 2kg... whatever I get, it will be a major improvement.

Thanks all.

Author:  thegunner [ Wed Jul 30, 2014 8:40 pm ]
Post subject:  Re: Open mold wide profile carbon wheels

i've had great luck with farsports, their rims have always been pretty spot-on in terms of weight, build quality (although they're not the cheapest anymore...)

Author:  pushstart [ Thu Jul 31, 2014 3:32 am ]
Post subject:  Re: Open mold wide profile carbon wheels

When you say "put together" are you planning to build the wheels?

I am really happy with the quality of my Light Bicycle U45 rims. Those obviously aren't shallow, but they have 29er MTB rims that might fit the bill. (My rims weighed 450g/pc so pretty light for wide rims.) Quality of the carbon finish, smoothness of bead/bed was all very nice. The ERD on both rims was identical and matched claimed numbers. The weights of each were within 2g of each other (and claimed). They seemed to be much better-built (at least the aspects one can see) than the Farsports clinchers I had previously. They also claim to be tubeless ready, though I have not tested that yet.

I just bought the rims and built the wheels; I had a poor experience with build quality from Farsports (I had to rebuild those wheels), so decided to build myself -- though that is not cheaper. I also wanted to use a front hub they did not have available -- the Novatec XD711 hub that is convertible to 15mm thru-axle (and 9mm thru-axle, which is what I am running now).

Anyway, very happy with these wheels. I have only ridden these ~1800 miles, buy they have sustained a lot of abuse (potholes, gravel, a crash a couple weeks ago) without flinching.

Author:  jamesaus [ Thu Jul 31, 2014 11:52 pm ]
Post subject:  Re: Open mold wide profile carbon wheels

pushstart wrote:
When you say "put together" are you planning to build the wheels?

I am really happy with the quality of my Light Bicycle U45 rims. Those obviously aren't shallow, but they have 29er MTB rims that might fit the bill. (My rims weighed 450g/pc so pretty light for wide rims.) Quality of the carbon finish, smoothness of bead/bed was all very nice. The ERD on both rims was identical and matched claimed numbers. The weights of each were within 2g of each other (and claimed). They seemed to be much better-built (at least the aspects one can see) than the Farsports clinchers I had previously. They also claim to be tubeless ready, though I have not tested that yet.

I just bought the rims and built the wheels; I had a poor experience with build quality from Farsports (I had to rebuild those wheels), so decided to build myself -- though that is not cheaper. I also wanted to use a front hub they did not have available -- the Novatec XD711 hub that is convertible to 15mm thru-axle (and 9mm thru-axle, which is what I am running now).

Anyway, very happy with these wheels. I have only ridden these ~1800 miles, buy they have sustained a lot of abuse (potholes, gravel, a crash a couple weeks ago) without flinching.


Yeah sorry when I said put together I used the term pretty loosely. I meant I'm going to spec a road rim with no brake track to mtb disc hub.

Any indication of build quality by light bicycle?

Author:  pushstart [ Fri Aug 01, 2014 2:50 am ]
Post subject:  Re: Open mold wide profile carbon wheels

jamesaus wrote:
Yeah sorry when I said put together I used the term pretty loosely. I meant I'm going to spec a road rim with no brake track to mtb disc hub.

Any indication of build quality by light bicycle?


I don't know; hopefully others can comment. You might want to look at reviews at MTBR too, as I think these guys are known (more?) for their MTB wheels. They use Pillar spokes (not Sapim) and they do offer the standard D711/D712 Novatec hubs, which seem just fine. Dunno if LB stocks a thru-axle hub option.

The only negatives I have seen on LB had to do with clearcoat on the brake tracks / poor braking, but obviously that was not a concern for the disc-brake build.

Anyway, good luck with the disc wheelset project.

Author:  ToffieBoi [ Fri Aug 01, 2014 2:15 pm ]
Post subject:  Re: Light Bicycle U 45 carbon rims

Any recent comments about the wheels?
Me and my friend are looking for 2 sets, and it will be either U45 or wide wheels from Hongfu.

Author:  Weenie [ Fri Aug 01, 2014 2:15 pm ]
Post subject:  Re: Light Bicycle U 45 carbon rims


Author:  Dingleberry [ Sat Aug 09, 2014 9:03 pm ]
Post subject:  Re: Open mold wide profile carbon wheels

pushstart wrote:
I am really happy with the quality of my Light Bicycle U45 rims. Those obviously aren't shallow, but they have 29er MTB rims that might fit the bill. (My rims weighed 450g/pc so pretty light for wide rims.) Quality of the carbon finish, smoothness of bead/bed was all very nice. The ERD on both rims was identical and matched claimed numbers. The weights of each were within 2g of each other (and claimed). They seemed to be much better-built (at least the aspects one can see) than the Farsports clinchers I had previously. They also claim to be tubeless ready, though I have not tested that yet.

I just bought the rims and built the wheels; I had a poor experience with build quality from Farsports (I had to rebuild those wheels), so decided to build myself -- though that is not cheaper. I also wanted to use a front hub they did not have available -- the Novatec XD711 hub that is convertible to 15mm thru-axle (and 9mm thru-axle, which is what I am running now).

Anyway, very happy with these wheels. I have only ridden these ~1800 miles, buy they have sustained a lot of abuse (potholes, gravel, a crash a couple weeks ago) without flinching.


Pretty much my thoughts on my 45mm LB disc rims! Also bought the rims separately and got them built up on Hope hubs by a local wheel builder - about 1300 miles so far, over some quite rough roads at times, and no problems whatsoever. Really impressed! I'm running them tubeless too, which also works fine.

Page 71 of 103 All times are UTC+01:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/