The CAAD Build Thread...

[hmai18]

You can find the older SiSL or the latest gen Si crank pretty easily. If it's a Cannondale, it pretty much needs to be running some version of the Hollowgram.

[JLS]

My first build caad7 with 105 groupset taken from cervelo r2 took it for a few spins beautiful paint job wish they still painted frames like this.

[prendrefeu]

I'll have a Cannondale SI Crankset (as standard on the current CAAD12 available for sale soon, if anyone is interested.
172.5mm, 52/36t, 110BCD


Oh yeah, basically almost everything that comes standard on the CAAD12 105 will also be for sale, never used, 0.000000000000000000000000 miles. If anyone is interested in some parts before they go in the For Sale section, or eBay, please let me know. The only things that I am keeping, for now, are the fork/frame/seatpost/headset bearings. I'll sell the seatpost (25.4) after I have the positioning set.

[romalor]

it's so good 25,4 mm for confort
But damn no many options and the 25,4 seat post have all the fsa setting system ( a piece of shit )

what'll you use to replace it ?

[Tinea Pedis]

VadarCAAD/SSD Executor now with Stromtroopers on board.

[prendrefeu]

it's so good 25,4 mm for confort
But damn no many options and the 25,4 seat post have all the fsa setting system ( a piece of shit )

what'll you use to replace it ?

Berk Integrated.
Seatpost clamp by SMUD

and lots, lots of other goodies.
So far, with predicted tuning of various components, I'm looking at 5.4kg.

[prendrefeu]

CAAD12 weights for reference purposes:
viewtopic.php?f=3&t=137189

[holem]

Thanks for the advice guys on CAAD10 build.

I'll have a Cannondale SI Crankset (as standard on the current CAAD12 available for sale soon, if anyone is interested.
172.5mm, 52/36t, 110BCD


Oh yeah, basically almost everything that comes standard on the CAAD12 105 will also be for sale, never used, 0.000000000000000000000000 miles. If anyone is interested in some parts before they go in the For Sale section, or eBay, please let me know. The only things that I am keeping, for now, are the fork/frame/seatpost/headset bearings. I'll sell the seatpost (25.4) after I have the positioning set.

As above, I'm looking for a crankset, how much would you be looking at for the SI crank? Thanks

[nathanong87]

VadarCAAD/SSD Executor now with Stromtroopers on board.

traitor

[Tinea Pedis]

I have no time for Rebel scum.

[holem]

So I have managed to get hold of the newly designed 2016 Cannondale SI crank (One seen at towards the bottom of this page http://www.bikeradar.com/road/news/arti ... ook-44620/) and I was fully set on pairing it up with a Force groupo for my CAAD10 build. However I've now also acquired a new Dura Ace 9000 chainset for a really good price, so I'm unsure whether to use that instead and go Ultegra with the DA crank (full DA outside my price range). Any advice?! Has anyone tried the new SI chainset?

Thanks

[CAAD997]

So I have managed to get hold of the newly designed 2016 Cannondale SI crank (One seen at towards the bottom of this page http://www.bikeradar.com/road/news/arti ... ook-44620/) and I was fully set on pairing it up with a Force groupo for my CAAD10 build. However I've now also acquired a new Dura Ace 9000 chainset for a really good price, so I'm unsure whether to use that instead and go Ultegra with the DA crank (full DA outside my price range). Any advice?! Has anyone tried the new SI chainset?

Thanks

Use the SI crank with the BB30 bottom bracket vs DuraAce with bottom bracket adapters. Just my opinion.

[Skylark]

[nathanong87]

good looking setup brew

[Skylark]

good looking setup brew

Cheers bud.

I think this calls for a celebration.