Let's See Your Time Trial bike
Moderators: maxim809, Moderator Team
*Homer: Love the bike and kudos for doing Challenge Cph!
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
- andreszucs
- in the industry
- Posts: 737
- Joined: Mon Nov 28, 2011 7:15 am
xsnailx wrote:@andre
yes, they are lighter than dura ace (unfortunately i dont have DA brakes handy to compare how much, they are also lighter than simkins aero)
provided they use pretty standard mounting hardware (http://www.tririg.com/galleries.php?id= ... ion&num=14" onclick="window.open(this.href);return false;) even more can be shaved
but the aero advantage is key here.
I was just kiding, I know about tririg brakes..but I'm done with this bike...if my wife see me twiking/upgrading my bike again ... not a good scenario ..
My stuff on sale https://www.ebay.com/sch/andreszucs/m.h ... pg=&_from=
- andreszucs
- in the industry
- Posts: 737
- Joined: Mon Nov 28, 2011 7:15 am
benrosa wrote::P
Should have Zipp wheels then?!
My stuff on sale https://www.ebay.com/sch/andreszucs/m.h ... pg=&_from=
-
- Posts: 479
- Joined: Sun Nov 14, 2010 10:25 pm
Almost finalized my TT bike. Only thing left to install is Extralite headset, but I'll ask the LBS for some assistance.
Oh yeah, try and find where I hid the valve extender
IMG_0942 by Quattrings, on Flickr
IMG_0944 by Quattrings, on Flickr
IMG_0945 by Quattrings, on Flickr
IMG_0959 by Quattrings, on Flickr
IMG_0949 by Quattrings, on Flickr
IMG_0946 by Quattrings, on Flickr
IMG_0948 by Quattrings, on Flickr
IMG_0952 by Quattrings, on Flickr
IMG_0947 by Quattrings, on Flickr
build list:
Caad 4 Aero, size 56
Cannondale fork
Ritchey logic headset
Syntace Stratos cx basebar
Syntace SLS aero bars (purchased from Rob English, cut off ski bends)
Syntace Grips
Thomson x2 stem cnc customised to integrate top cap
Syntace p6 seatpost
Campagnolo seatpost collar
Fsa vero crank with aero 54t chainring
Shimano Square tape bb, removed dust seals
Shimano 105 casette 12-25
Shimano 105 chain
Sram tt500 shifters
Sram rival Rear mech
Sram tt500 brake levers
Simkins Egg brakes (purchased from Juanmoretime, who is a real stand up guy. Thanks again )
Corima disc and four spoke clincher (repaired the dings and painted matte black)
Vittoria open corsa 23mm
Oh yeah, try and find where I hid the valve extender
IMG_0942 by Quattrings, on Flickr
IMG_0944 by Quattrings, on Flickr
IMG_0945 by Quattrings, on Flickr
IMG_0959 by Quattrings, on Flickr
IMG_0949 by Quattrings, on Flickr
IMG_0946 by Quattrings, on Flickr
IMG_0948 by Quattrings, on Flickr
IMG_0952 by Quattrings, on Flickr
IMG_0947 by Quattrings, on Flickr
build list:
Caad 4 Aero, size 56
Cannondale fork
Ritchey logic headset
Syntace Stratos cx basebar
Syntace SLS aero bars (purchased from Rob English, cut off ski bends)
Syntace Grips
Thomson x2 stem cnc customised to integrate top cap
Syntace p6 seatpost
Campagnolo seatpost collar
Fsa vero crank with aero 54t chainring
Shimano Square tape bb, removed dust seals
Shimano 105 casette 12-25
Shimano 105 chain
Sram tt500 shifters
Sram rival Rear mech
Sram tt500 brake levers
Simkins Egg brakes (purchased from Juanmoretime, who is a real stand up guy. Thanks again )
Corima disc and four spoke clincher (repaired the dings and painted matte black)
Vittoria open corsa 23mm
Last edited by quattrings on Thu Sep 06, 2012 9:08 am, edited 1 time in total.
-
- Posts: 643
- Joined: Sun Apr 24, 2011 6:23 am
- Location: Melbourne, Australia
Digging the single 54T chainring
Slam your stem.
i would rather go with pearson than TJ product:
http://forum.slowtwitch.com/gforum.cgi?post=3974505
http://bicycledesign.net/wp-content/upl ... 99x305.jpg
mod: if this is too of topic please move or delete this post.
http://forum.slowtwitch.com/gforum.cgi?post=3974505
http://bicycledesign.net/wp-content/upl ... 99x305.jpg
mod: if this is too of topic please move or delete this post.
just built this up today,Its my first TT bike so not sure on my position yet.
cervelo p3
zipp 900 disc
ffwd 58mm front wheel
7800 groupset
vision base bar
profile design clip ons
quarq rotor power meter - will swap between this bike and my road bike
speed play pedals
old stem i had lying around
old saddle i had spare
would lilk to make a few changes
-swap yellow rear tub for a black one
-black stem
- aero tt rings (possibly osymetrics
-omega brakes
-integrated bars
also thinking about removing the zipp stickers to make the disc match my front wheel better. any thoughts?
yeah I've seen that mod it looks great, don't really fancy taking a drill to my brand new frame though.
i didn't run the cables internally through the extensions i taped them to the underneaths so they run alongside the stem and then down into the holes.
running them out the back of the extensions or outside the pads had made the cables stick out the side of the bike and into the air, the way i've done it was the cleanest way i could figure out.
and i've made them as short as i thought possible..........
if anyone has any pics or suggestions of how to make the cabling better (without using a drill) I'd be pleased to hear them.
think i'll go centre pull at the front when i buy the aero brake to reduce cabling slightly
i didn't run the cables internally through the extensions i taped them to the underneaths so they run alongside the stem and then down into the holes.
running them out the back of the extensions or outside the pads had made the cables stick out the side of the bike and into the air, the way i've done it was the cleanest way i could figure out.
and i've made them as short as i thought possible..........
if anyone has any pics or suggestions of how to make the cabling better (without using a drill) I'd be pleased to hear them.
think i'll go centre pull at the front when i buy the aero brake to reduce cabling slightly
-
- Posts: 643
- Joined: Sun Apr 24, 2011 6:23 am
- Location: Melbourne, Australia
You could try zip tying the cables to keep them closer to the frame.
Slam your stem.
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
-
- Posts: 141
- Joined: Wed Jun 22, 2011 9:39 pm
I agree, you need both aero and light. It was nerve racking to drill my P3 top tube, but it still feels great and has tidied up the cabling dramatically.
FYI I was thinking of doing a side by side comparison of some TT helmets, if people would be interested? Hopefully including an aero test if the weather allows any time soon! I thought it might be useful as its often difficult to assess how the shape of the helmet works in real life, and just how big or small they are! I've already got a Giro Advantage II, a Giro Selector and a Kask Bambino. Could probably acquire a spuik kronos maybe a bell meteor too.
FYI I was thinking of doing a side by side comparison of some TT helmets, if people would be interested? Hopefully including an aero test if the weather allows any time soon! I thought it might be useful as its often difficult to assess how the shape of the helmet works in real life, and just how big or small they are! I've already got a Giro Advantage II, a Giro Selector and a Kask Bambino. Could probably acquire a spuik kronos maybe a bell meteor too.