Wooden RENOVO R1 road bike
Moderators: MrCurrieinahurry, maxim809, Moderator Team
- Powerful Pete
- Moderator
- Posts: 4132
- Joined: Fri Dec 10, 2004 10:22 am
- Location: Lima, Peru and the Washington DC area - it's complicated.
Fantastic. I am very curious about the bike, ride quality and final weight.
Keep posting pictures, please!
Keep posting pictures, please!
Road bike: Cervelo R3, Campagnolo Chorus/Record mix...
Supercommuter: Jamis Renegade...
Oldie but goodie: De Rosa Professional Slx, Campagnolo C-Record...
And you can call me Macktastik Honey Pete Kicks, thank you.
Supercommuter: Jamis Renegade...
Oldie but goodie: De Rosa Professional Slx, Campagnolo C-Record...
And you can call me Macktastik Honey Pete Kicks, thank you.
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
Wow! That is so ridiculously cool! Looking forward to the build!
I have decided to switch out the Fizik Arione CX saddle, that I had initially planned to use on this build, for a Brooks Team saddle. I have though about trying out a Brooks saddle for a long time, but for some reason I never ended up purchased one. However, I have decided this build deserves something more special than a standard Fizik saddle.
The Brooks saddle is going to be custom engraved. The guy who is going to do it for me has done some amazing saddles in the past. These are just two examples. You can find more examples here: http://www.sintchristophorus.nl/zadel-galerij/
The Brooks saddle is going to be custom engraved. The guy who is going to do it for me has done some amazing saddles in the past. These are just two examples. You can find more examples here: http://www.sintchristophorus.nl/zadel-galerij/
- StuTheWeak
- Posts: 763
- Joined: Sat Apr 09, 2011 11:29 pm
- Location: Springdale, AR
Don't forget to take out a termite policy.
That is a pretty cool project....I'd really like to know how it turns out.
That is a pretty cool project....I'd really like to know how it turns out.
Specialized Allez 06' "Rain Bike" 21.50lbs
Neuvation F100 11' "Road Bike" 16.80lbs
Specialized Tarmac Pro 11' "WW Bike" 14.25lbs
Neuvation F100 11' "Road Bike" 16.80lbs
Specialized Tarmac Pro 11' "WW Bike" 14.25lbs
- TheRedMantra
- Posts: 217
- Joined: Sun Oct 13, 2002 3:51 pm
- Contact:
crohnsy wrote:Cane creek makes a headset with wood inlay... The 110 Reserve iirc
They only made 50. Titanium with wood inlays. Half in maple and half in mahogany. I've got a new maple one if you're seriously interested. Even has titanium interlok spacers. T2bikes.com has a mahogany in stock too.
I finally settled on the front fork and stem I will be using on this frame. It is not going to be a combination of a 3T Funda and a Deda Zero 100 I had in mind. Instead I will be going with:
A custom built fork and stem combination built by Rob English from English Cycles!
Not sure what colour would look best with the frame though. Chrome would be nice, but maybe a little bit over the top. Black?
A custom built fork and stem combination built by Rob English from English Cycles!
Not sure what colour would look best with the frame though. Chrome would be nice, but maybe a little bit over the top. Black?
SWijland wrote:I finally settled on the front fork and stem I will be using on this frame. It is not going to be a combination of a 3T Funda and a Deda Zero 100 I had in mind. Instead I will be going with:
A custom built fork and stem combination built by Rob English from English Cycles!
Not sure what colour would look best with the frame though. Chrome would be nice, but maybe a little bit over the top. Black?
Like this one:
Nick was kind enough to send me a couple of construction pictures of the chain and seat stays. Pretty cool to see how these parts start out.
"the chainstays are cut, but not laminated, and the seatstays are ready for CNC machining (which is why I shot them on the CNC table.)
Cheers,
Nick Wood
Renovo"
The frame will probably be finished at the end of November at which time they will send it to English Cycles, so Rob can start work on the front fork/stem combo.
I also managed to find a wheel builder who is going to put together the Ghisallo rims and the Dura Ace hubs. We both had to read up on how to build up wooden rims, because apperently there is quite a lot of difference in building up a wooden rim, as supposed to an aluminium or carbon rim (much lower spoke tension, resting after first tensioning, etc).
Anyway, here a the pictures Nick sent me.
"the chainstays are cut, but not laminated, and the seatstays are ready for CNC machining (which is why I shot them on the CNC table.)
Cheers,
Nick Wood
Renovo"
The frame will probably be finished at the end of November at which time they will send it to English Cycles, so Rob can start work on the front fork/stem combo.
I also managed to find a wheel builder who is going to put together the Ghisallo rims and the Dura Ace hubs. We both had to read up on how to build up wooden rims, because apperently there is quite a lot of difference in building up a wooden rim, as supposed to an aluminium or carbon rim (much lower spoke tension, resting after first tensioning, etc).
Anyway, here a the pictures Nick sent me.
Very cool indeed.
Out of curiosity, I wonder what are the odds of these babies bassing EFBE tests and the like?
Out of curiosity, I wonder what are the odds of these babies bassing EFBE tests and the like?
Fast falcons: http://www.youtube.com/watch?v=j3mTPEuFcWk" onclick="window.open(this.href);return false;
www.falcobike.com
Facebook: falcobikeglobal
www.falcobike.com
Facebook: falcobikeglobal
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
when i saw the title of this thread a few weeks ago i nearly had a heart attack.
in England 'woody' is a slang word for something quite different
cool project though, really interesting and unusual
in England 'woody' is a slang word for something quite different
cool project though, really interesting and unusual