I've been lurking for a while and thought it was about time I showed you my ongoing project. I haven't got weights for everything unfortunately, but the parts that I've weighed have been noted.
TCR Advanced (Medium - 1035g with mech hanger)
TCR Advanced (were 325g uncut)
Contact SLR 42cm (200g)
Stem: Bontrager Race XXX Lite 100mm with ti bolts
Headset: FSA 1 1/4" to 1 1/8" Integrated
Fork Expander: Extralite Ultrastar 2 (7g)
with ti bolt
Wheels: Soul C5.0 with Soul veloplugs (Front: 592g, Rear: 757g)
Tyres: Veloflex Master 22mm (195g each)
Tubes: Bontrager Race X Lite (69g each)
Skewers: Planet-X Ti Stick Quick Release with Carbon Levers (44g pair)
Saddle: Selle Italia C64 (107g)
Vector - Trimmed, ti M6 bolt, KCNC yoke, Thomson cradle and cut the existing top cradle to clamp only the front of the rails
Seatpost clamp: Giant
with ti bolts (19g)
Cranks: Sram Red 50/34 170mm (636g with chainrings)
Bottom Bracket: Sram BB86 Pressfit (92g)
Pedals: Bebop Stainless (191g)
Chain: KMC X10-SL
Cassette: Sram Red 11-23t (153g)
Front mech: Sram Red Black braze-on (69g)
Rear mech: Sram Red (145g)
Brakes: Planet-X Ultralight CNC with Soul carbon pads
Cables: Gore Ride-On
Bartape: Deda - sanded the logos off the bar ends
Bottlecage: Either a Giant
(25g), MT Zoom (12g) or a combination of the two
Extras - Glued a tiny magnet (<1g) to the spokes to replace the obese standard magnet, Jagwire cable adjuster for front mech
The weight is 6.22kg (13.71lbs)
right now but there are a few small changes in the future so it should drop a bit.
- Trim the excess steerer tube, I need to make sure it's not too low before I get the hacksaw out.
- Find a lower stack conical spacer for my headset, I removed the excessively large one that came with the bike so I could get the bars lower.
- Swap the tubes out for Bontrager Race XXX Lite with 60mm valves.
- Wait for my parts from Smud Carbon to arrive (saddle, topcap, seatpost cradle and cages).