Anyone still have a steel bike?
Moderators: maxim809, Moderator Team
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
ecguevara wrote:Oooohhhh! A family of steel Colnagos!
They are sweet, but not a single quill stem? :p
Love the Pegorettis too, very special, the Luigino in particular (although I'm not into single-speed at all).
Bikes: Raw Ti, 650b flatbar CX
Nothing fancy, but it IS steel. Frame was given to me by a good friend, and I built it with Sram parts I had laying around.
Used as a commuter and the occasional long ride. Super comfortable
1985 Bridgestone 700
Used as a commuter and the occasional long ride. Super comfortable
1985 Bridgestone 700
Instagram: joserheo
|| Mosaic RT-1 || Cannondale Evo || Cannondale CAAD10 ||
|| Mosaic RT-1 || Cannondale Evo || Cannondale CAAD10 ||
Hi all, my first post on here and here is my latest bike I rescued before it was put in a skip:
Edit to add spec:
Frame is columbus slx
Full dura ace 7402 groupset
Wheels are mavic open 4 cd on dura ace hubs
Flite saddle
Cinelli bars and stem
Not fitted is a campagnolo chorus seat post. (To short for me)
Edit to add spec:
Frame is columbus slx
Full dura ace 7402 groupset
Wheels are mavic open 4 cd on dura ace hubs
Flite saddle
Cinelli bars and stem
Not fitted is a campagnolo chorus seat post. (To short for me)
Last edited by Gregg on Sun Aug 25, 2013 9:19 am, edited 1 time in total.
- ultimobici
- in the industry
- Posts: 4463
- Joined: Sun Nov 21, 2004 2:45 pm
- Location: Trento, Italia
- Contact:
BxEddie wrote:Hi Guys,
I was looking for my ever first racing bike for quite some time now.
A 1982 Peugeot PH12. This is very special, beceause it is the first bike with aerodynamik tubes and
internal cabelhousing. Peugeot made it to celebrate their 100jear jubilee. It was only made in 82.
Gitane beg to differ - 1980 Profil
http://www.velocompetition.com/1980-git ... rt135.html" onclick="window.open(this.href);return false;
http://www.reneherse.com/gitanearbes.html" onclick="window.open(this.href);return false;
I put some new Open Pro CD laced to Hope Pro3 hubs(aprx. 1500g) and some new bars on the Rychtarski
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
sorry about posting it in here, but I believe i don't need a new topic, and the question is about a steel frame. But if the moderators think it should be a topic, feel free to move.
I got a cr-mo Colossi frame, brand new. Cheap, but damn nice. Straight and really well buit. Made with Columbus Zona, 54 top tube (wich by the way, is a bit small to me - I should use a 55,5 TT). Built with DA7800, wheels are DA hubs with a Mach1 rim (32 holes), Velo orange alu seatpost (with huge setback) and a Velo seat with titanium rails. 700X23 clinchers, butyl tubes and maxxis tires.
Anyway, the bike rides damn nice almost all the time, but it just jumps A LOT in the rear. If I run over some bad tarmac (wich we have lots here in Brazil) the thing acts like a freaking Kanguru. It's annoying me too damn much
any ideas on what cause this, and what I can try to do to fix it? The Zona tubing was suposed to be strong. By the way, since the frame is a bit small, I got a lot of seatpost showing. I run with 120 psi on the clinchers, as I weight 81kg. With my AL and carbon bikes, never felt this weird problem...
Thanks in advance and again, if I should make a topic for it, just tell me.
I got a cr-mo Colossi frame, brand new. Cheap, but damn nice. Straight and really well buit. Made with Columbus Zona, 54 top tube (wich by the way, is a bit small to me - I should use a 55,5 TT). Built with DA7800, wheels are DA hubs with a Mach1 rim (32 holes), Velo orange alu seatpost (with huge setback) and a Velo seat with titanium rails. 700X23 clinchers, butyl tubes and maxxis tires.
Anyway, the bike rides damn nice almost all the time, but it just jumps A LOT in the rear. If I run over some bad tarmac (wich we have lots here in Brazil) the thing acts like a freaking Kanguru. It's annoying me too damn much
any ideas on what cause this, and what I can try to do to fix it? The Zona tubing was suposed to be strong. By the way, since the frame is a bit small, I got a lot of seatpost showing. I run with 120 psi on the clinchers, as I weight 81kg. With my AL and carbon bikes, never felt this weird problem...
Thanks in advance and again, if I should make a topic for it, just tell me.