hi all hope you all had a good christmas!

heres what I got, a new frameset from planet x *(updated weights)

Component Make Model g
Frame Planet X SL Pro Carbon 1033
Forks Planet X Pro Carbon 346
wheelset mavic kysrium 1595
Tubes x2 Bontrager XXXlite 100
Tyres Schwalbe Ultremo R.1 382
F/mech clamp BBB 34.9mm 20
Front mech Shimano Ultegra 76
Chain KMC X10SL Gold 230
Rear mech Shimano Dura-ace 7800 162 tuned
Cassette Shimano Dura-ace 7900 174
lockring Kcnc Red 7
Chainset FSA K-force light 587
Bottom Bracket FSA Megaxo Ceramic 80
Brake calipers Shimano Dura-ace 7800 304 tuned
Shift levers Shimano Dura-ace 7700 419
Cables Shimano Dura-ace 200
Pedals Look Keo Ti 195
Bar tape Lizard skins Race 40
Handlebars Ritchey WCS 228
Headset FSA CE Orbit 72
Headset bung Extralite Ultrastar 2 7
Stem Bikehut 100mm 137
seatpost clamp Planet X Superlight Ti 9
Seatpost FSA SL 250 SBS 157 tuned
Seat Selle Italia SLR (cover removed) 110 tuned
Bottle cage bolts Kcnc 1
Bottle cage Enigma Carbon 12 tuned
Skewers Kcnc Ti Red 44

total confirmed new updated weight 6660g or 14.6Lb

future optimization?

_________________
www.aromadiff.com

I plan to change the brakes for Kcnc C7 in black, a Kcnc Ti scandium or new ultimate post, and stem to either Kcnc or extralite. sholud bring the weight down to about 6350g or 14lb my target weight.

sorry about the small picture it was a quick snap hope to put some better ones up when I can.

cheers.

KCNC Ti Prolite is a good choice and stem Extralite.

But I'd rather be leading you I make a pair of carbon tubular wheels

_________________
www.aromadiff.com

a better picture,

tuned rear mech with fibrelyte cage, kcnc jockey wheels, Ti pivot bot and pinch bolt and modified cable adjuster.

fsa k-force light chainset with 50t-39t rings

6.68kg on my scales, does that mean that i have offically become a weight weenie?

Good looking and surprisingly light but sensible build. As others have stated I would get some faster wheels and keep stem/post. Planet X carbon wheels would be a good choice look-wise.

Thanks for the comment, I can live with the post and stem, I was thinking of modding the post by cutting the clamp mech off which i think is heavy and using the the offcut from the carbon steerer for the cradle and kcnc yokes and pin avalible as spares from my kcnc shop should save a few grams as well as £.

you have the same ideas as me about the wheels I was thinking getting the planet x pro 50 carbon wheels too, great price and will compliment the frameset.

I have built the bike up using parts from reading on this great forum and think its a sensible build too.

well done bikejunkie, you're definitely going in the right direction ....

Thought the seatpost could do with a bit of a weight loss as its quite heavy.

A few ingredients are needed, a cheap alloy carabiner, offcut carbon steerer, spare yokes and bolts.

post as it is.

weight before.

cut off top clamp mech
and weight