Is it me, or does it look like the ISP topper is correctly attached to the saddle rails?! If it's not, be careful!

_________________
My sub-5.7kg / 12.53lb Addict R1

WTB: Challenge latex tubes, 700c x 60mm - NEW only

he doesnt have an ISP?????

but yeah the attachment looks a bit confused.

I think it is a traditional seat post, perhaps the 3T doric.
I have seen at least one model with this type of seat clamp.

http://www.3tcycling.com/products.aspx?i=road&t=Seatposts&p=doric

It's a New Ultimate aluminum post:
http://fairwheelbikes.com/new-ultimate- ... -1419.html

looks even better live

_________________
[b]My Bianchi 928 SL IASP

viewtopic.php?f=10&t=71069&start=15

Here are more details about paint job

_________________
SCOTT CR1 SL Custom Paint&Build
SCOTT Spark Custom Build
------------------------------------
CITY_IMAGE bike design portfolio

That is really great...

I love how you used the design of the decals of the 2011 cr1 and put it on an older frame. LOVE IT! I have the same frame but in a 2006 cr1 pro. GREAT JOB!! This bike looks incredible, definitely wish mine was like this.

I don't know that this is the right place to post this, but did Tune alter the shape of the Kom-Vor since its release? I noticed yours has no cut-away on the sides like mine does. If you look on the fairwheel site you'll notice the difference http://fairwheelbikes.com/tune-komvor-s ... -2202.html

Thanks! It's a pleasure for me to see that other people have good reaction on my work.
Yes, i used design for 2011 as start point. Logo on down tube is same as one on new Scott bikes, but rest of design is echo of design made by Scott for new Scale ltd. Logo on fork was final touch by me. Space on both sides of fork is too big to be left just empty. So I had to put something on it.

Frankly I don’t like design of Scott bike in last two years. Too many lines and looks “overworked”. Scott has beautiful frames but current design complete destroy it.
It’s just my opinion. I’m not a designer but I own Advert/Brand Company, so in time I learned something about graphics design.

In last ten years we designed few hundred bikes for one of our client. Samples of our 2010 work you can find here:

http://www.cityimage.rs/portfolio/?p=455

Please note that all brands shown here are low cost (120-500€).

_________________
SCOTT CR1 SL Custom Paint&Build
SCOTT Spark Custom Build
------------------------------------
CITY_IMAGE bike design portfolio

Not right place, but who cares

I think that just first samples has small cut out. I think that tune discovered that saddle can't handle weight of complete bike if you hang your bike on some tube and use this part of saddle as hook.

_________________
SCOTT CR1 SL Custom Paint&Build
SCOTT Spark Custom Build
------------------------------------
CITY_IMAGE bike design portfolio

Amazing paint job! I love it.

_________________
2013 Wilier Cento1 SR || 2009 Ridley Crossbow || 2011 Yeti AS-R 5 Carbon

Absolutely LOVE the paint!! I want to do this to my frame. I'm just going to show this thread to my painter and simply say "do this!"

Nice work. There are a ton of awesome bikes on here but yours does seem to stand out.

Thank you all!

Feel free to ask me anything regard this small project.
Choosing right color, finish, coat or making design and applying it, if i know answer i will help.

_________________
SCOTT CR1 SL Custom Paint&Build
SCOTT Spark Custom Build
------------------------------------
CITY_IMAGE bike design portfolio

Well done. Very nice balance of fork and frame color and choice of components.

_________________
-For my next trick I will set myself on fire!
-This board and the world in general would be a much nicer place if everyone could just take themselves a little less seriously.
-Sticky Fingers John Rockefeller
-First one over the cliff wins!