Was going for Ultegra chain but switch to KMC X10SL instead. Showed 244g on my scale.

Ya, Alfonze, DuraAce skewers are kind of heavy. Will be using KCNC, shows an impressive weight of 45g. The CB1 brakes are also very light at one hundred sixty something. Know nothing about them. Although You're right, very solid on the Shimano's skewers. Took a pic of my KCNC.

_________________
my S-WORKS and be here.

Sorry for taking so long guys. But it's getting closer . Received the Veloflex Corsa 22 tires today but boy! I am disappointed! Put one of them on the scale and showed 202g! What happened to the 180g? I live in an area with a higher center of gravity? Well, another 42g gain.

Another issue with Deda Superzero seatpost in white. Posted 166g just about everywhere, and got 199g on scale! My initial intention was to get the bike to under 15lbs, we'll see .

_________________
my S-WORKS and be here.

Nice budget (not a small budget that is) build with zipp cranks and DA wheels:-)
Whats the weight of the cranks with BB?
Sorry to hear that tires and seatpost are that much heavier then planned. My syntace P6 post is claimed 205gr and on the scale it is 172gr:-)
Tires (Vredestein frotezza tricomp) are claimed 225gr and were 223gr when new, now a bit weared out and are under 220 each.

Well, Zipp crankset purchased used w/ ceramic BB (under 1000 miles) and the wheels were from eBay winning bid (new) . Both were great deals. The VumaQuad w/BB, 2 steel washers and a wave ring weigh ~590g (my scale only shows 10g fraction).

Although the seatpost weighs more but like the look on this bike . There might be a future upgrade...... Pics soon to come on complete bike.

_________________
my S-WORKS and be here.

The bike's just about done. No pedals, no cages, no computer. It has come to 6.25kg on my scale.

_________________
my S-WORKS and be here.

Weight without pedals and cages doesn't count.

_________________
Exp001

Seems like reaching my goal of below 15lbs .

_________________
my S-WORKS and be here.

Can't wait to see the complete bike

My Specialized Tarmac S-Works SL3:

Handlebar- Easton EA90SLX
Bartape- Fizik Microtek
Stem- Ritchey WCS 4Axis
Shifters- Ultegra 6700
Cables- Yokozuna
Saddle- Selle Italia SLR
Seatpost- Deda Superzero White
Crankset- Zipp VumaQuad
Chain- KMC X10SL
Cassette- Recon 11-27
F & R Derailleurs- Ultegra 6700
Cages- Bontrager Carbon
Pedals- Eggbeater 2Ti (ordered)
Skewers- KCNC
Brakes- KCNC CB1
Wheels- DuraAce WH7850-C24
Tubes- Michelin AirComp Ultralight
Tires- Veloflex Corsa22

Weight with all of the above: 6501 g or 14.33 lbs.







Thank you for viewing.

_________________
my S-WORKS and be here.

Well done my friend!

_________________
-For my next trick I will set myself on fire!
-This board and the world in general would be a much nicer place if everyone could just take themselves a little less seriously.
-Sticky Fingers John Rockefeller
-First one over the cliff wins!

Replace the white cable housing with red and blue seat to white, May be the stem to black? Bar tape? What do you guys think? Please give some suggestions. Thank you .

_________________
my S-WORKS and be here.

remove blue tape, put yellow plugs (42g>6) and you will have around 1388g

_________________
SCOTT CR1 SL Custom Paint&Build
SCOTT Spark Custom Build
------------------------------------
CITY_IMAGE bike design portfolio

... this may be difficult, but:

Headset cap -> black
Spacers -> white
Stem -> black

This reflects the colour pattern of your seatclamp/seatpost/seat which is black/white/black.
Just a suggestion.

Oh, and I may have missed your answer to this question if it was already asked: why the Eggbeater pedals?
For road you'll be much better off with a larger platform such as Time, Look, Shimano, etc road pedals.

Unless you're going with mtb setup just out of familiarity or a desire to use mtb shoes? Which is reasonable for your own needs of course.

_________________
Exp001

Really nice looking build. Deda Sueperzero weight based on shortest length. You can have your seatpost cut as long as length in frame exceeds minimum required, and fit Ti bolts to bring weight down.

_________________
Ozrider - Western Australia
Parlee Z5 XL 2011 (6055g/13.32lbs) Raleigh RC Ltd 2008 (7.6kg) Reynolds 653 Custom 1990 (9.8kg, now 8.8kg)
The accumulation of marginal gains is what makes the difference between winning and losing

i love it

_________________
πατα τραβα ρε