All Specialized Tarmacs
Moderators: maxim809, Moderator Team
Has any one on tarmac sl3 fitted their ride with 25mm tyres on 25mm wide rims? Was afraid of running into clearance issues.
Sent from my SM-G920I using Tapatalk
Sent from my SM-G920I using Tapatalk
My bike is finished except some tubular gluing. 6,46kg and the glue will be light
/jonas l
http://instagram.com/jonaslundb
http://instagram.com/jonaslundb
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
-
- Posts: 159
- Joined: Wed Aug 07, 2013 10:31 am
- Location: Brighton, UK
You might want to stick a rotor on that front wheel! What rear mech are you running there?
IamnotWiggins: There is a rotor on that frontwheel Sram Force 1 rear derailleur
/jonas l
http://instagram.com/jonaslundb
http://instagram.com/jonaslundb
-
- Posts: 10
- Joined: Thu Jul 16, 2015 8:58 pm
cerro wrote:My bike is finished except some tubular gluing. 6,46kg and the glue will be light
Love the pink. I have been wanting to build a pink/matte s-works with pink spinergy's.
-
- Posts: 159
- Joined: Wed Aug 07, 2013 10:31 am
- Location: Brighton, UK
cerro wrote:IamnotWiggins: There is a rotor on that frontwheel Sram Force 1 rear derailleur
So there is! Wow, it blends into that wall very, very well!
-
- Posts: 9
- Joined: Wed Feb 03, 2016 2:19 pm
Hey there,
my new Tarmac Pro with Mavic R-Sys. Some changes are coming to lose some weight as it is currently at 7,4kg...
my new Tarmac Pro with Mavic R-Sys. Some changes are coming to lose some weight as it is currently at 7,4kg...
-
- Posts: 541
- Joined: Mon May 22, 2006 11:34 am
- Location: Dubai, UAE
- Contact:
cerro wrote:My bike is finished except some tubular gluing. 6,46kg and the glue will be light
Stunning!
Who stocks the Engage post's and stems?
No one at the moment as AX-Lightness closed the brand. But Bike24.de got som stems left. The seatpost I have had for a year.
/jonas l
http://instagram.com/jonaslundb
http://instagram.com/jonaslundb
-
- Posts: 541
- Joined: Mon May 22, 2006 11:34 am
- Location: Dubai, UAE
- Contact:
cerro wrote:No one at the moment as AX-Lightness closed the brand. But Bike24.de got som stems left. The seatpost I have had for a year.
Bummer, the seat post looks great. Wonder why they discontinued the sub brand?...
2016 S-Works Tarmac 56 Chameleon Paint
Sram eTap group with Ultegra cassette and chain
S-Works P2M with S-Works rings
DA Pedals
Wheels: WI hubs, Sapim Laser/Race, Pacenti rims or Roval CLX60
Tune skewers
Speci Power Pro saddle
3T ARX II Team stem with Barfly Directmount faceplate
3T Rotundo LTD 40cm
S-Works seatpost
Alligator I-link housing
Arundel Dave-O cages
Fizik tape
Vittoria latex tubes and GP4000s
6980 with the Rovals. I'm swapping the expander plug and cap for the Cannondale model, which should save 30-35. Hoping to upgrade to S-Works Power, which is another 60. If I can trim the housing and save another 10 it would then only take a lighter cassette to get to 6.8 on the dot in this config.
I'm also wondering if I could save a bit by trimming my post since its got a lot left. I like the look and not sure what's that much lighter to swap it with. The Barfly isn't light and has the GoPro/light mount, but its nice having nothing clamped to my bars. I have considered taking a grinder to the Barfly since its really oversized and made of AL. Any other realistic ideas are welcome.
Angle has the saddle looking real weird:
Sram eTap group with Ultegra cassette and chain
S-Works P2M with S-Works rings
DA Pedals
Wheels: WI hubs, Sapim Laser/Race, Pacenti rims or Roval CLX60
Tune skewers
Speci Power Pro saddle
3T ARX II Team stem with Barfly Directmount faceplate
3T Rotundo LTD 40cm
S-Works seatpost
Alligator I-link housing
Arundel Dave-O cages
Fizik tape
Vittoria latex tubes and GP4000s
6980 with the Rovals. I'm swapping the expander plug and cap for the Cannondale model, which should save 30-35. Hoping to upgrade to S-Works Power, which is another 60. If I can trim the housing and save another 10 it would then only take a lighter cassette to get to 6.8 on the dot in this config.
I'm also wondering if I could save a bit by trimming my post since its got a lot left. I like the look and not sure what's that much lighter to swap it with. The Barfly isn't light and has the GoPro/light mount, but its nice having nothing clamped to my bars. I have considered taking a grinder to the Barfly since its really oversized and made of AL. Any other realistic ideas are welcome.
Angle has the saddle looking real weird:
-
- Resident master of GIF
- Posts: 3405
- Joined: Mon Jul 18, 2011 2:44 am
- Contact:
oh illest machine
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com