Finally - my Pinarello :-D
Moderators: MrCurrieinahurry, maxim809, Moderator Team
Nice bike again Mads. I promise you, you will love those wheels!!!!!
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
Boonen wrote:Very nice Mads, I think it looks great! Hope you get that srm working soon, did you think about placing a little piece of bent aluminium under the bb that will hold the power sensor in place close to the crank?
Have a nice ride!
Thank you, Christian - I'm also pretty happy! Might change them stem for a -10 degrees stem (maybe FRM) for at lower stem!
Sounds like a good suggestion with the metal-plate - I might try making one of these!
Giant: I'm pretty sure that you're right - they roll so smooth! So you know if it's sapim cx-ray spokes? looks like it but I'm not sure... if not some weight could be saved here because the wheels are a little heavy (1613 grams without QR).
Boonen wrote:Hope you get that srm working soon, did you think about placing a little piece of bent aluminium under the bb that will hold the power sensor in place close to the crank?
Or maybe buy one of these "SRM Power Pickup Bracket for Carbon Fiber Frames" or make your own:
http://www.competitivecyclist.com/za/CC ... GORY.ID=44
Last edited by 2 wheels on Sun Oct 22, 2006 2:34 pm, edited 1 time in total.
2 Wheels: nice - would be exactly what I'm looking for but 50 punds I might try and make something myself!
Didn't thought that the sensor would work with that angle to the powermeter? thought it had to be... what is the word! Angleright?
Didn't thought that the sensor would work with that angle to the powermeter? thought it had to be... what is the word! Angleright?
-
- Posts: 3635
- Joined: Sat Apr 01, 2006 12:17 am
- Location: A bigger rock in the Pacific (AUS)
Mads Kock wrote:what is the word! Angleright?
Perpendicular? or at right angles to? Same thing. Sorry, im so tired that I'm coming around doing spelling stuff instead of actually helping out, sorry Mads
I'll say it again though, I'm very impressed, though could you get a fork with less silly curvy bits
(Yes, LJ, I did not mean to insult Pinarello's, please forgive me, it was the sleep deprivation I tells ya!, yhe sleep deprivation!)
Last edited by Skillgannon on Sun Oct 22, 2006 2:48 pm, edited 1 time in total.
Mads Kock wrote:2 Wheels: nice - would be exactly what I'm looking for but 50 punds I might try and make something myself!
Actually it's 50 US dollars, not 50 pounds, but still expensive for a peice of plastic. But they probably don't sell a lot of them, so I don't think they earn that much on them since they have also spent some time designing them. It looks like it's made o a CNC machine and not molded plastic.
Maybe they should sell the design to SRM so they could mass produce them and deliver them with each SRM kit.
But the picture can also be a good inspiration on how to make your own bracket.
-
- Posts: 3635
- Joined: Sat Apr 01, 2006 12:17 am
- Location: A bigger rock in the Pacific (AUS)
That material is quite cheap...to get a nice finish is a bit of a bitch from memory, but you can cut it with a hacksaw and it will cut fairly cleanly, with a bit of effort. Wouldnt be to hard if you know someone with some tools, if they knew what they were doing, it'd be maybe a 30 minute job, tops, from the looks of it, to make a simplified version.
2 wheels wrote:Actually it's 50 US dollars,
That's better - I think I will first try and mount it with the same angle as with the mount - didn't think it was working that way and it had to be Perpendicular? (thanks Skillgannon if it's the right word hehe). But it looks like a good and solid solution!
For you, Morten:
Thats look better......... ...top nice
See all my bike h e r e
-
- Posts: 3635
- Joined: Sat Apr 01, 2006 12:17 am
- Location: A bigger rock in the Pacific (AUS)
Mate looks even better with the Zipps on - pure class
But it looks like the sensor has to be perpendicular and flush with the pwoercontrol, so yeah, probably the right word to go with there, bloody english, to many words (says the guy who can't seem to pick up any other language )
But it looks like the sensor has to be perpendicular and flush with the pwoercontrol, so yeah, probably the right word to go with there, bloody english, to many words (says the guy who can't seem to pick up any other language )
Tillquist wrote:Thats look better......... ...top nice
maybe even better with your custom made stem
Mads Kock wrote:Giant: I'm pretty sure that you're right - they roll so smooth! So you know if it's sapim cx-ray spokes? looks like it but I'm not sure... if not some weight could be saved here because the wheels are a little heavy (1613 grams without QR).
Sorry I don't know, but sure look like a cx-ray type of spokes... But you won't notice they are a little "heavy". The bearings and and stiffness pays the overweight many times back!!! And the main reason they are not light is the hubs. They are not exactly light - rather heavy acually. But I think they contribute a lot to the overall stiffness! The "flanges" is nearly at the end of the axles which overall means that you get a stiffer wheel! Also the G3 lacing I think contibutes to the stiffness. And the bearings..... You allready know!
The rear hubs weights around 300 g and the front (I don't know) i think doesn't weight less that 150 g.
rim + spokes = 1613 - 300 - 150 = 1163
And then take a set of light weight hubs (around 270 g)
1163 + 270 = 1433 g which is a relativ light set of clinchers!
The hub weight doesn't mean that much so you actually have a bombproof set of light wheels!
I have driven these for around 3 years, most races. They have never been too the "doctor". 100 % straight. Have been ridden on cobblestone etc. and they are still perfect!
Sounds great!!!! I was just thinking of making them lighter with the same performance!
I'm looking forward to trying them but I can feel how easy them spin... what about the bearings? will they last?
I'm looking forward to trying them but I can feel how easy them spin... what about the bearings? will they last?
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
Mads Kock wrote:Sounds great!!!! I was just thinking of making them lighter with the same performance!
I'm looking forward to trying them but I can feel how easy them spin... what about the bearings? will they last?
Of course! They are the best of the best. I have never re-greased my eurus yet. Mayby I should this winter.... This year I re-grease my 3 year old Proton trainningwheels just to find out that the old grease was as new!! You could upgrade them with ceramic bearings for about 1100 dkr (I thinking of doing so with my boras), but I don't think you will get them much more smooth, as I think they allreaddy are superior to any other hub on the market! Congratulation, you have just bought the best allround wheel for the danish conditions!
PS: How often have you seen these, Bora, or Neutron for sale (used)??? Compared to zipp, AM Classic, Mavic etc....