Cannondale Supersix Evo 2015

[jobvisser]

weight will follow



Upgrades to do
1. New stem, could go with a Kalloy which will save about 60 Grams
2. Carbon bars (thinking about secondhand Syntace Racelite for €70) will save 90 grams
3. New expander (standard cannondale is 50 grams) thinking about the lighter 16 gram version
4. Sram red/ cannondale hollowgram crank
5. Continental supersonic innertubes
6. Continental GP 4000 S II




Will be updated/tuned

[jobvisser]

Added pictures, will try to weigh it next week. would like to hear where i can upgrade without spending too much

[Tomstr]

Lekker bezig!

Vredestein latex doet het goed qua gram/€. Mantel.com heeft ze wel liggen.

[Asteroid]

Fun, cool project for you. Imagine you paid less than $1,500.
Little bit confused by saying you put Force on, but the build list indicates Red.
And perhaps you went from 11sp to 10sp?
Guessing current total weight falls between 7 to 8 kg.
You can find one of those inexpensive hanging scales for $15 on Amazon.

[jobvisser]

Lekker bezig!

Vredestein latex doet het goed qua gram/€. Mantel.com heeft ze wel liggen.

Altijd handig zo'n stikker, zijn conti supersonics niet handiger omdat ik dan niet elke dag hoef te pompen ?

Fun, cool project for you. Imagine you paid less than $1,500.
Little bit confused by saying you put Force on, but the build list indicates Red.
And perhaps you went from 11sp to 10sp?
Guessing current total weight falls between 7 to 8 kg.
You can find one of those inexpensive hanging scales for $15 on Amazon.

i
I am trying to get it to get the weight below 6Kg without spending more than €600

[Tomstr]

Ik kan je foto's niet zien maar ik ga er van uit dat je een naamsticker met vlag op je fiets hebt.

Conti superlight kan ook maar gaat snel lek is mijn ervaring. Over de Vredestein binnen banden ben ik erg tevreden. De spanning checken moet toch voor je gaat rijden, met of zonder latex.

[Tom06]

It's nice but where are the pictures?

[jobvisser]

It's nice but where are the pictures?

should be visible now... google drive somehow didnt work...

Something things i could use some advice one.

I have this "clicking" pf30 BB again . it started creaking with the original cannondale bearings so i installed a new Sram pf30 BB in it,
i did use loctite 609 but didn't use the recommended Primer.
it was click free for 25km and then i started again. i would really like to fix this but i dont know if using the primer on with a new sram BB .
i did hear some good things about the token fusion BB, should i try that one of just buy a threaded one directly ?


. right now im using a normal 5mm instead of a 15mm conical spacer that came with my bike, i Want to get a 7mm Conical spacer because i find lower more comfortable, but i cant really find them online. anyone can give me a link to one ?

[Tom06]

Indeed with pics its much better!
You talk about the spacer of headset?

[jobvisser]

Indeed with pics its much better!
You talk about the spacer of headset?

jup,i want the same as this one but lower

[jobvisser]

oops

[dudemanppl]

Jesus please fix the bar/shifter angle!

[glam2deaf]

Looks like the shifters are in the right place? Just need to rotate the bars up a bit. Unless you're Bardet...

[JScycle]

Looks like the shifters are in the right place? Just need to rotate the bars up a bit. Unless you're Bardet...

I'm assuming that is temporary until he gets a slammed stem

[jobvisser]

Looks like the shifters are in the right place? Just need to rotate the bars up a bit. Unless you're Bardet...

I'm assuming that is temporary until he gets a slammed stem

jup, find it more comfortable. need to get a -17 degree stem or a smaller frame