Cannondale Supersix Evo 2015
Moderators: MrCurrieinahurry, maxim809, Moderator Team
I recently built one of these in a 58cm size. Current weight is 6.260kgs. Im waiting for a carbon bar to save around 120grams vs the cheap deda bar on it now currently.
You can see the build here: viewtopic.php?f=10&t=145399
You can see the build here: viewtopic.php?f=10&t=145399
Cannondale Systemsix Ultegra 2020
viewtopic.php?f=10&t=160844
viewtopic.php?f=10&t=160844
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
Peeza21 wrote:I recently built one of these in a 58cm size. Current weight is 6.260kgs. Im waiting for a carbon bar to save around 120grams vs the cheap deda bar on it now currently.
You can see the build here: viewtopic.php?f=10&t=145399
thx, aiming for 6.3 kg without spending too much . where do you get your low headset spacer ?
---> Send me a pm to order world's lightest low carbon fiber dust covers! (1g) <---
Mine is from SlamThatStem web site but it look probably too slim considering your expectations.
i just found a site which sells the 7mm fsa spacers im looking for. dont want to go slam as i will have top cut the steerer then and i want to sell this frame when i find a cheap hi-modTom06 wrote:Mine is from SlamThatStem web site but it look probably too slim considering your expectations.
Last edited by jobvisser on Fri Oct 18, 2019 9:39 pm, edited 1 time in total.
---> Send me a pm to order world's lightest low carbon fiber dust covers! (1g) <---
jobvisser wrote:Peeza21 wrote:I recently built one of these in a 58cm size. Current weight is 6.260kgs. Im waiting for a carbon bar to save around 120grams vs the cheap deda bar on it now currently.
You can see the build here: viewtopic.php?f=10&t=145399
thx, aiming for 6.3 kg without spending too much . where do you get your low headset spacer ?
Currently the headset spacer is the standard cannondale supersix one, I will change it for the slam that stem one as I need it almost flush with the frame.
Cannondale Systemsix Ultegra 2020
viewtopic.php?f=10&t=160844
viewtopic.php?f=10&t=160844
Upgrade time
bar : Syntace Racelite 44cm o-o ±214 g (being shipped)
stem : havent decided yet but think im going for an uno. can someone tell me which one to get and if it is a good idea to use it on a carbon bar.(thinking about the Kalloy UNO Ultralight right now, ±114 g)
Expander: Going with the lighter cannondale expander which is 13g . think this is the best value
Swapped the standard 35mm out with a 15mm one on an old bike. the standard one is really heavy btw.
bar : Syntace Racelite 44cm o-o ±214 g (being shipped)
stem : havent decided yet but think im going for an uno. can someone tell me which one to get and if it is a good idea to use it on a carbon bar.(thinking about the Kalloy UNO Ultralight right now, ±114 g)
Expander: Going with the lighter cannondale expander which is 13g . think this is the best value
Peeza21 wrote:jobvisser wrote:Peeza21 wrote:I recently built one of these in a 58cm size. Current weight is 6.260kgs. Im waiting for a carbon bar to save around 120grams vs the cheap deda bar on it now currently.
You can see the build here: viewtopic.php?f=10&t=145399
thx, aiming for 6.3 kg without spending too much . where do you get your low headset spacer ?
Currently the headset spacer is the standard cannondale supersix one, I will change it for the slam that stem one as I need it almost flush with the frame.
Swapped the standard 35mm out with a 15mm one on an old bike. the standard one is really heavy btw.
---> Send me a pm to order world's lightest low carbon fiber dust covers! (1g) <---
I weight it on an analog scale and it was about 6,45kg but i think that is a bit off
Ordered a Hylix seatpost, 2 Continental gp 4000s II,Schawlbe ultra light innertubes, the lighter cannondale expander, new bartape, and an Uno stem. think it will save about 200 gr. Couldn't find the token bottom bracket which i want so will have to wait for that one
Ordered a Hylix seatpost, 2 Continental gp 4000s II,Schawlbe ultra light innertubes, the lighter cannondale expander, new bartape, and an Uno stem. think it will save about 200 gr. Couldn't find the token bottom bracket which i want so will have to wait for that one
---> Send me a pm to order world's lightest low carbon fiber dust covers! (1g) <---