2016 Cervélo S3 – eTap build

Who are you (no off-topic talk please)

Moderator: Moderator Team

Post Reply
NIXvelo
Posts: 4
Joined: Fri Dec 23, 2016 12:46 pm

by NIXvelo

Image

Frame – Cervélo S3 size 54
Fork – Cervélo All-Carbon Tapered S3 Fork
Brake/Shift Levers – SRAM Red eTap
Brake Calipers – SRAM Red AeroLink
Front Derailleur – SRAM Red eTap
Rear Derailleur – SRAM Red eTap
Chain Catcher – SRAM Red
Cranks – Rotor 3D+ Compact 172.5mm
Bottom Bracket – BBInfinite Ceramitech
Chainrings – Rotor Aero Q-Rings 52/36
Chain – KMC X11SL
Cassette – SRAM Red 11-28
Wheels – ZIPP 303 Firecrest Clinchers
Skewers – ZIPP Titanium
Tyres – Schwalbe One 25mm
Tubes – Continental Race Light 60mm
Handlebars – 3T Aeronova Ltd Stealth 44mm
Stem – 3T ARX Ltd Stealth 90mm
Headset – FSA IS2
Seatpost – Cervélo Aero 2 Position Carbon
Saddle – Fizik Antares R1 Carbon Braided
Pedals – Speedplay Zero Titanium
Bottle Cages – Arundel Mandible Carbon
Bar Tape – Lizard Skin DSP 1.8mm
Cables – Jagwire Road Elite Link
Computer Mount – Fetha Garmin Faceplate Mount

ryanw
Posts: 326
Joined: Sat Apr 16, 2016 6:52 pm
Location: London

by ryanw

Lovely!

Just under 7kg?...
'16 Cervelo S5 - 6900g
'17 Focus Mares Force 1
'15 Scott Addict Team - 6850g Sold
'17 Cervelo R3D DA - 7580g - Sold
'16 Cannondale CAAD12 DA Disc - 7560g - RIP

by Weenie


SLCBrandon
Posts: 721
Joined: Fri Oct 05, 2012 3:52 am

by SLCBrandon

I like the S3 SO much more than the S5. Nice.

bencolem
Posts: 994
Joined: Fri Apr 25, 2008 9:36 pm
Location: GA

by bencolem

That works!

User avatar
kgt
Posts: 6717
Joined: Sun Jun 18, 2006 10:29 am
Location: Athens, Greece

by kgt

SLCBrandon wrote:I like the S3 SO much more than the S5. Nice.

+1

ryanw
Posts: 326
Joined: Sat Apr 16, 2016 6:52 pm
Location: London

by ryanw

SLCBrandon wrote:I like the S3 SO much more than the S5. Nice.


Maybe that's why Cervelo have made the 2017 S5 look like the S3?.. :noidea:
'16 Cervelo S5 - 6900g
'17 Focus Mares Force 1
'15 Scott Addict Team - 6850g Sold
'17 Cervelo R3D DA - 7580g - Sold
'16 Cannondale CAAD12 DA Disc - 7560g - RIP

KCookie
Posts: 852
Joined: Thu Feb 12, 2015 9:40 am
Location: Pom living in Australia

by KCookie

Great looking bike, well done. !!

NIXvelo
Posts: 4
Joined: Fri Dec 23, 2016 12:46 pm

by NIXvelo

Thanks all.

@ryanw... it turned out a bit porkier than I expected. I calculated it to sit around the 6.9kg mark when I was choosing all the parts... but the weight sits somewhere between 7.1-7.2kg mark. Was hoping to try and get it down to 6.9kg without using any exotic parts... 23mm rubber and Conti Supersonics might save 80+ grams... any ideas?

ryanw
Posts: 326
Joined: Sat Apr 16, 2016 6:52 pm
Location: London

by ryanw

Look at my build, supersonics save 50g straight away!
'16 Cervelo S5 - 6900g
'17 Focus Mares Force 1
'15 Scott Addict Team - 6850g Sold
'17 Cervelo R3D DA - 7580g - Sold
'16 Cannondale CAAD12 DA Disc - 7560g - RIP

NIXvelo
Posts: 4
Joined: Fri Dec 23, 2016 12:46 pm

by NIXvelo

ryanw wrote:Look at my build, supersonics save 50g straight away!


Thanks ryanw... you have a nice S5 build there... ordered the supersonics.

backside10
Posts: 3
Joined: Thu Nov 01, 2012 9:45 pm

by backside10

Any issues with clearance between the etap front derailleur and the 3D+ crank arm? I've heard on some frames the lower limit screw hits the arm. Thanks

NIXvelo
Posts: 4
Joined: Fri Dec 23, 2016 12:46 pm

by NIXvelo

backside10 wrote:Any issues with clearance between the etap front derailleur and the 3D+ crank arm? I've heard on some frames the lower limit screw hits the arm. Thanks


No issues at all.

GarethNightingale
Posts: 4
Joined: Wed May 31, 2017 1:24 pm

by GarethNightingale

God I bleddy love this

by Weenie


User avatar
prendrefeu
Posts: 8590
Joined: Wed Oct 31, 2007 10:32 pm
Location: Los Feliz, Los Angeles, California
Contact:

by prendrefeu

This is pulling up a thread from a while ago, but any chance you managed to weigh the fork prior to installation/cutting?
Exp001 || Other projects in the works.

Post Reply
  • Similar Topics
    Replies
    Views
    Last post